diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml
index de6ac49..8c038d7 100644
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -10,7 +10,7 @@ on:
jobs:
pack:
name: Generate pack
- runs-on: ubuntu-22.04
+ runs-on: ubuntu-24.04
steps:
- uses: actions/checkout@v4
with:
@@ -23,8 +23,8 @@ jobs:
- uses: Open-CMSIS-Pack/gen-pack-action@main
with:
- doxygen-version: 1.9.6 # default
- packchk-version: 1.3.95 # default
+ doxygen-version: 1.13.2 # default
+ packchk-version: 1.4.2 # default
gen-doc-script: ./DoxyGen/gen_doc.sh # skipped by default
check-links-script: ./DoxyGen/check_links.sh # skipped by default
doc-path: ./Documentation/html # skipped by default
diff --git a/.github/workflows/cmsis_rv2.yml b/.github/workflows/cmsis_rv2.yml
index c411720..c2c6850 100644
--- a/.github/workflows/cmsis_rv2.yml
+++ b/.github/workflows/cmsis_rv2.yml
@@ -141,7 +141,7 @@ jobs:
publish-test-results:
needs: [build-and-run]
- runs-on: ubuntu-22.04
+ runs-on: ubuntu-24.04
if: github.event_name == 'pull_request'
env:
@@ -163,4 +163,4 @@ jobs:
report_individual_runs: true
event_name: ${{ github.event.workflow_run.event }}
files: "artifacts/**/*.junit"
-
\ No newline at end of file
+
diff --git a/.github/workflows/gh-pages.yml b/.github/workflows/gh-pages.yml
index 205ce7d..f9844ee 100644
--- a/.github/workflows/gh-pages.yml
+++ b/.github/workflows/gh-pages.yml
@@ -43,4 +43,4 @@ jobs:
- name: Deploy to GitHub Pages
id: deployment
- uses: actions/deploy-pages@v4
\ No newline at end of file
+ uses: actions/deploy-pages@v4
diff --git a/DoxyGen/CMSIS-RTOS2_Validation.txt b/DoxyGen/CMSIS-RTOS2_Validation.txt
index c58f45c..91d203e 100644
--- a/DoxyGen/CMSIS-RTOS2_Validation.txt
+++ b/DoxyGen/CMSIS-RTOS2_Validation.txt
@@ -23,7 +23,7 @@ The CMSIS-RTOS2 validation tests and verifies:
This manual contains the following chapters:
- \ref test_results - Explains how to interpret the test results.
- \ref config - Contains information about test suite configuration options
- - Reference - Explains the individual CMSIS-RTOS2 API tests.
+ - Reference - Explains the individual CMSIS-RTOS2 API tests.
This manual assumes that you are familiar with Keil MDK. Refer to
MDK Version 5 - Getting Started for additional information.
diff --git a/DoxyGen/Doxyfile.dxy.in b/DoxyGen/Doxyfile.dxy.in
index 98fc3c5..948d9cb 100644
--- a/DoxyGen/Doxyfile.dxy.in
+++ b/DoxyGen/Doxyfile.dxy.in
@@ -1,7 +1,7 @@
-# Doxyfile 1.9.2
+# Doxyfile 1.13.2
# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
+# Doxygen (www.doxygen.org) for a project.
#
# All text after a double hash (##) is considered a comment and is placed in
# front of the TAG it is preceding.
@@ -12,6 +12,16 @@
# For lists, items can also be appended using:
# TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (\" \").
+#
+# Note:
+#
+# Use Doxygen to compare the used configuration file with the template
+# configuration file:
+# doxygen -x [configFile]
+# Use Doxygen to compare the used configuration file with the template
+# configuration file without replacing the environment variables or CMake type
+# replacement variables:
+# doxygen -x_noenv [configFile]
#---------------------------------------------------------------------------
# Project related configuration options
@@ -41,7 +51,7 @@ PROJECT_NAME = "CMSIS-RTOS2 Validation"
PROJECT_NUMBER = "Version {projectNumber}"
# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
+# for a project that appears at the top of each page and should give viewers a
# quick idea about the purpose of the project. Keep the description short.
PROJECT_BRIEF = "Validates RTOS2 API Implementation"
@@ -53,24 +63,42 @@ PROJECT_BRIEF = "Validates RTOS2 API Implementation"
PROJECT_LOGO = _DoxyTemplates/armkeil_white_h.png
+# With the PROJECT_ICON tag one can specify an icon that is included in the tabs
+# when the HTML document is shown. Doxygen will copy the logo to the output
+# directory.
+
+PROJECT_ICON =
+
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
+# entered, it will be relative to the location where Doxygen was started. If
# left blank the current directory will be used.
OUTPUT_DIRECTORY = ../Documentation/
-# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
+# If the CREATE_SUBDIRS tag is set to YES then Doxygen will create up to 4096
+# sub-directories (in 2 levels) under the output directory of each output format
+# and will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding Doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise cause
+# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to
+# control the number of sub-directories.
# The default value is: NO.
CREATE_SUBDIRS = NO
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# Controls the number of sub-directories that will be created when
+# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every
+# level increment doubles the number of directories, resulting in 4096
+# directories at level 8 which is the default and also the maximum value. The
+# sub-directories are organized in 2 levels, the first level always has a fixed
+# number of 16 directories.
+# Minimum value: 0, maximum value: 8, default value: 8.
+# This tag requires that the tag CREATE_SUBDIRS is set to YES.
+
+CREATE_SUBDIRS_LEVEL = 8
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, Doxygen will allow non-ASCII
# characters to appear in the names of generated files. If set to NO, non-ASCII
# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
# U+3044.
@@ -79,28 +107,28 @@ CREATE_SUBDIRS = NO
ALLOW_UNICODE_NAMES = NO
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
+# documentation generated by Doxygen is written. Doxygen will use this
# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian,
+# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English
+# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek,
+# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with
+# English messages), Korean, Korean-en (Korean with English messages), Latvian,
+# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese,
+# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish,
+# Swedish, Turkish, Ukrainian and Vietnamese.
# The default value is: English.
OUTPUT_LANGUAGE = English
-# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# If the BRIEF_MEMBER_DESC tag is set to YES, Doxygen will include brief member
# descriptions after the members that are listed in the file and class
# documentation (similar to Javadoc). Set to NO to disable this.
# The default value is: YES.
BRIEF_MEMBER_DESC = YES
-# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# If the REPEAT_BRIEF tag is set to YES, Doxygen will prepend the brief
# description of a member or function before the detailed description
#
# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
@@ -131,13 +159,13 @@ ABBREVIATE_BRIEF = "The $name class" \
the
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
+# Doxygen will generate a detailed section even if there is only a brief
# description.
# The default value is: NO.
ALWAYS_DETAILED_SEC = NO
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# If the INLINE_INHERITED_MEMB tag is set to YES, Doxygen will show all
# inherited members of a class in the documentation of that class as if those
# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
@@ -145,7 +173,7 @@ ALWAYS_DETAILED_SEC = NO
INLINE_INHERITED_MEMB = NO
-# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# If the FULL_PATH_NAMES tag is set to YES, Doxygen will prepend the full path
# before files name in the file list and in the header files. If set to NO the
# shortest path that makes the file name unique will be used
# The default value is: YES.
@@ -155,14 +183,14 @@ FULL_PATH_NAMES = NO
# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
# Stripping is only done if one of the specified strings matches the left-hand
# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
+# If left blank the directory from which Doxygen is run is used as the path to
# strip.
#
# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
+# will be relative from the directory where Doxygen is started.
# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-STRIP_FROM_PATH =
+STRIP_FROM_PATH =
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
# path mentioned in the documentation of a class, which tells the reader which
@@ -171,43 +199,44 @@ STRIP_FROM_PATH =
# specify the list of include paths that are normally passed to the compiler
# using the -I flag.
-STRIP_FROM_INC_PATH =
+STRIP_FROM_INC_PATH =
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
+# If the SHORT_NAMES tag is set to YES, Doxygen will generate much shorter (but
+# less readable) file names. This can be useful if your file system doesn't
# support long names like on DOS, Mac, or CD-ROM.
# The default value is: NO.
SHORT_NAMES = NO
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen will interpret the
+# first line (until the first dot, question mark or exclamation mark) of a
+# Javadoc-style comment as the brief description. If set to NO, the Javadoc-
+# style will behave just like regular Qt-style comments (thus requiring an
+# explicit @brief command for a brief description.)
# The default value is: NO.
JAVADOC_AUTOBRIEF = NO
-# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line
+# If the JAVADOC_BANNER tag is set to YES then Doxygen will interpret a line
# such as
# /***************
# as being the beginning of a Javadoc-style comment "banner". If set to NO, the
# Javadoc-style will behave just like regular comments and it will not be
-# interpreted by doxygen.
+# interpreted by Doxygen.
# The default value is: NO.
JAVADOC_BANNER = NO
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will interpret the first
+# line (until the first dot, question mark or exclamation mark) of a Qt-style
+# comment as the brief description. If set to NO, the Qt-style will behave just
+# like regular Qt-style comments (thus requiring an explicit \brief command for
+# a brief description.)
# The default value is: NO.
QT_AUTOBRIEF = NO
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen treat a
# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
# a brief description. This used to be the default behavior. The new default is
# to treat a multi-line C++ comment block as a detailed description. Set this
@@ -219,10 +248,10 @@ QT_AUTOBRIEF = NO
MULTILINE_CPP_IS_BRIEF = NO
-# By default Python docstrings are displayed as preformatted text and doxygen's
+# By default Python docstrings are displayed as preformatted text and Doxygen's
# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the
-# doxygen's special commands can be used and the contents of the docstring
-# documentation blocks is shown as doxygen documentation.
+# Doxygen's special commands can be used and the contents of the docstring
+# documentation blocks is shown as Doxygen documentation.
# The default value is: YES.
PYTHON_DOCSTRING = NO
@@ -233,7 +262,7 @@ PYTHON_DOCSTRING = NO
INHERIT_DOCS = YES
-# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then Doxygen will produce a new
# page for each member. If set to NO, the documentation of a member will be part
# of the file/class/namespace that contains it.
# The default value is: NO.
@@ -264,8 +293,6 @@ TAB_SIZE = 2
ALIASES = "token{1}=\1" \
"refrlarm{1}= \1"
-
-
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
# only. Doxygen will then generate output that is more tailored for C. For
# instance, some of the names that are used will be different. The list of all
@@ -306,30 +333,30 @@ OPTIMIZE_OUTPUT_SLICE = NO
# parses. With this tag you can assign which parser to use for a given
# extension. Doxygen has a built-in mapping, but you can override or extend it
# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# language is one of the parsers supported by Doxygen: IDL, Java, JavaScript,
# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice,
# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
# tries to guess whether the code is fixed or free formatted code, this is the
-# default for Fortran type files). For instance to make doxygen treat .inc files
+# default for Fortran type files). For instance to make Doxygen treat .inc files
# as Fortran files (default is PHP), and .f files as C (default is Fortran),
# use: inc=Fortran f=C.
#
# Note: For files without extension you can use no_extension as a placeholder.
#
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen. When specifying no_extension you should add
+# the files are not read by Doxygen. When specifying no_extension you should add
# * to the FILE_PATTERNS.
#
# Note see also the list of default file extension mappings.
-EXTENSION_MAPPING =
+EXTENSION_MAPPING =
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# If the MARKDOWN_SUPPORT tag is enabled then Doxygen pre-processes all comments
# according to the Markdown format, which allows for more readable
# documentation. See https://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# The output of markdown processing is further processed by Doxygen, so you can
+# mix Doxygen, HTML, and XML commands with Markdown formatting. Disable only in
# case of backward compatibilities issues.
# The default value is: YES.
@@ -339,25 +366,45 @@ MARKDOWN_SUPPORT = YES
# to that level are automatically included in the table of contents, even if
# they do not have an id attribute.
# Note: This feature currently applies only to Markdown headings.
-# Minimum value: 0, maximum value: 99, default value: 5.
+# Minimum value: 0, maximum value: 99, default value: 6.
# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
TOC_INCLUDE_HEADINGS = 5
-# When enabled doxygen tries to link words that correspond to documented
+# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to
+# generate identifiers for the Markdown headings. Note: Every identifier is
+# unique.
+# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a
+# sequence number starting at 0 and GITHUB use the lower case version of title
+# with any whitespace replaced by '-' and punctuation characters removed.
+# The default value is: DOXYGEN.
+# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
+
+MARKDOWN_ID_STYLE = DOXYGEN
+
+# When enabled Doxygen tries to link words that correspond to documented
# classes, or namespaces to their corresponding documentation. Such a link can
# be prevented in individual cases by putting a % sign in front of the word or
-# globally by setting AUTOLINK_SUPPORT to NO.
+# globally by setting AUTOLINK_SUPPORT to NO. Words listed in the
+# AUTOLINK_IGNORE_WORDS tag are excluded from automatic linking.
# The default value is: YES.
AUTOLINK_SUPPORT = YES
+# This tag specifies a list of words that, when matching the start of a word in
+# the documentation, will suppress auto links generation, if it is enabled via
+# AUTOLINK_SUPPORT. This list does not affect affect links explicitly created
+# using \# or the \link or commands.
+# This tag requires that the tag AUTOLINK_SUPPORT is set to YES.
+
+AUTOLINK_IGNORE_WORDS =
+
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
+# tag to YES in order to let Doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
+# versus func(std::string) {}). This also makes the inheritance and
+# collaboration diagrams that involve STL classes more complete and accurate.
# The default value is: NO.
BUILTIN_STL_SUPPORT = NO
@@ -369,16 +416,16 @@ BUILTIN_STL_SUPPORT = NO
CPP_CLI_SUPPORT = NO
# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
+# https://www.riverbankcomputing.com/software) sources only. Doxygen will parse
+# them like normal C++ but will assume all classes use public instead of private
+# inheritance when no explicit protection keyword is present.
# The default value is: NO.
SIP_SUPPORT = NO
# For Microsoft's IDL there are propget and propput attributes to indicate
# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
+# Doxygen to replace the get and set methods by a property in the documentation.
# This will only work if the methods are indeed getting or setting a simple
# type. If this is not the case, or you want to show the methods anyway, you
# should set this option to NO.
@@ -387,7 +434,7 @@ SIP_SUPPORT = NO
IDL_PROPERTY_SUPPORT = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES then doxygen will reuse the documentation of the first
+# tag is set to YES then Doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
# The default value is: NO.
@@ -445,18 +492,18 @@ TYPEDEF_HIDES_STRUCT = YES
# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
# cache is used to resolve symbols given their name and scope. Since this can be
# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
+# code, Doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# Doxygen will become slower. If the cache is too large, memory is wasted. The
# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
+# symbols. At the end of a run Doxygen will report the cache usage and suggest
# the optimal cache size from a speed point of view.
# Minimum value: 0, maximum value: 9, default value: 0.
LOOKUP_CACHE_SIZE = 0
-# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use
-# during processing. When set to 0 doxygen will based this on the number of
+# The NUM_PROC_THREADS specifies the number of threads Doxygen is allowed to use
+# during processing. When set to 0 Doxygen will based this on the number of
# cores available in the system. You can set it explicitly to a value larger
# than 0 to get more control over the balance between CPU load and processing
# speed. At this moment only the input processing can be done using multiple
@@ -468,11 +515,19 @@ LOOKUP_CACHE_SIZE = 0
NUM_PROC_THREADS = 1
+# If the TIMESTAMP tag is set different from NO then each generated page will
+# contain the date or date and time when the page was generated. Setting this to
+# NO can help when comparing the output of multiple runs.
+# Possible values are: YES, NO, DATETIME and DATE.
+# The default value is: NO.
+
+TIMESTAMP = YES
+
#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------
-# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# If the EXTRACT_ALL tag is set to YES, Doxygen will assume all entities in
# documentation are documented, even if no documentation was available. Private
# class members and static file members will be hidden unless the
# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
@@ -538,7 +593,7 @@ EXTRACT_ANON_NSPACES = NO
RESOLVE_UNNAMED_PARAMS = YES
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
# undocumented members inside documented classes or files. If set to NO these
# members will be included in the various overviews, but no documentation
# section is generated. This option has no effect if EXTRACT_ALL is enabled.
@@ -546,22 +601,31 @@ RESOLVE_UNNAMED_PARAMS = YES
HIDE_UNDOC_MEMBERS = NO
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy. If set
# to NO, these classes will be included in the various overviews. This option
-# has no effect if EXTRACT_ALL is enabled.
+# will also hide undocumented C++ concepts if enabled. This option has no effect
+# if EXTRACT_ALL is enabled.
# The default value is: NO.
HIDE_UNDOC_CLASSES = NO
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# If the HIDE_UNDOC_NAMESPACES tag is set to YES, Doxygen will hide all
+# undocumented namespaces that are normally visible in the namespace hierarchy.
+# If set to NO, these namespaces will be included in the various overviews. This
+# option has no effect if EXTRACT_ALL is enabled.
+# The default value is: YES.
+
+HIDE_UNDOC_NAMESPACES = YES
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all friend
# declarations. If set to NO, these declarations will be included in the
# documentation.
# The default value is: NO.
HIDE_FRIEND_COMPOUNDS = NO
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
# documentation blocks found inside the body of a function. If set to NO, these
# blocks will be appended to the function's detailed documentation block.
# The default value is: NO.
@@ -575,29 +639,31 @@ HIDE_IN_BODY_DOCS = NO
INTERNAL_DOCS = NO
-# With the correct setting of option CASE_SENSE_NAMES doxygen will better be
+# With the correct setting of option CASE_SENSE_NAMES Doxygen will better be
# able to match the capabilities of the underlying filesystem. In case the
# filesystem is case sensitive (i.e. it supports files in the same directory
# whose names only differ in casing), the option must be set to YES to properly
# deal with such files in case they appear in the input. For filesystems that
-# are not case sensitive the option should be be set to NO to properly deal with
+# are not case sensitive the option should be set to NO to properly deal with
# output files written for symbols that only differ in casing, such as for two
# classes, one named CLASS and the other named Class, and to also support
# references to files without having to specify the exact matching casing. On
-# Windows (including Cygwin) and MacOS, users should typically set this option
+# Windows (including Cygwin) and macOS, users should typically set this option
# to NO, whereas on Linux or other Unix flavors it should typically be set to
# YES.
-# The default value is: system dependent.
+# Possible values are: SYSTEM, NO and YES.
+# The default value is: SYSTEM.
CASE_SENSE_NAMES = NO
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# If the HIDE_SCOPE_NAMES tag is set to NO then Doxygen will show members with
# their full class and namespace scopes in the documentation. If set to YES, the
# scope will be hidden.
# The default value is: NO.
HIDE_SCOPE_NAMES = NO
-# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then Doxygen will
# append additional text to a page's title, such as Class Reference. If set to
# YES the compound reference will be hidden.
# The default value is: NO.
@@ -610,7 +676,7 @@ HIDE_COMPOUND_REFERENCE= NO
SHOW_HEADERFILE = YES
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# If the SHOW_INCLUDE_FILES tag is set to YES then Doxygen will put a list of
# the files that are included by a file in the documentation of that file.
# The default value is: YES.
@@ -623,7 +689,7 @@ SHOW_INCLUDE_FILES = YES
SHOW_GROUPED_MEMB_INC = NO
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen will list include
# files with double quotes in the documentation rather than with sharp brackets.
# The default value is: NO.
@@ -635,14 +701,14 @@ FORCE_LOCAL_INCLUDES = NO
INLINE_INFO = YES
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# If the SORT_MEMBER_DOCS tag is set to YES then Doxygen will sort the
# (detailed) documentation of file and class members alphabetically by member
# name. If set to NO, the members will appear in declaration order.
# The default value is: YES.
SORT_MEMBER_DOCS = YES
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# If the SORT_BRIEF_DOCS tag is set to YES then Doxygen will sort the brief
# descriptions of file, namespace and class members alphabetically by member
# name. If set to NO, the members will appear in declaration order. Note that
# this will also influence the order of the classes in the class list.
@@ -650,7 +716,7 @@ SORT_MEMBER_DOCS = YES
SORT_BRIEF_DOCS = NO
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then Doxygen will sort the
# (brief and detailed) documentation of class members so that constructors and
# destructors are listed first. If set to NO the constructors will appear in the
# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
@@ -662,7 +728,7 @@ SORT_BRIEF_DOCS = NO
SORT_MEMBERS_CTORS_1ST = NO
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# If the SORT_GROUP_NAMES tag is set to YES then Doxygen will sort the hierarchy
# of group names into alphabetical order. If set to NO the group names will
# appear in their defined order.
# The default value is: NO.
@@ -679,11 +745,11 @@ SORT_GROUP_NAMES = NO
SORT_BY_SCOPE_NAME = NO
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# If the STRICT_PROTO_MATCHING option is enabled and Doxygen fails to do proper
# type resolution of all parameters of a function it will reject a match between
# the prototype and the implementation of a member function even if there is
# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# simple string match. By disabling STRICT_PROTO_MATCHING Doxygen will still
# accept a match between prototype and implementation in such cases.
# The default value is: NO.
@@ -697,11 +763,8 @@ GENERATE_TODOLIST = YES
# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
# list. This list is created by putting \test commands in the documentation.
-
-
# The default value is: YES.
-
GENERATE_TESTLIST = YES
# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
@@ -721,7 +784,7 @@ GENERATE_DEPRECATEDLIST= YES
# sections, marked by \if ... \endif and \cond
# ... \endcond blocks.
-ENABLED_SECTIONS =
+ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
# initial value of a variable or macro / define can have for it to appear in the
@@ -756,25 +819,25 @@ SHOW_FILES = YES
SHOW_NAMESPACES = NO
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
+# Doxygen should invoke to get the current version for each file (typically from
# the version control system). Doxygen will invoke the program by executing (via
# popen()) the command command input-file, where command is the value of the
# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
+# by Doxygen. Whatever the program writes to standard output is used as the file
# version. For an example see the documentation.
-FILE_VERSION_FILTER =
+FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
+# by Doxygen. The layout file controls the global structure of the generated
# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
+# that represents Doxygen's defaults, run Doxygen with the -l option. You can
# optionally specify a file name after the option, if omitted DoxygenLayout.xml
# will be used as the name of the layout file. See also section "Changing the
# layout of pages" for information.
#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# Note that if you run Doxygen from a directory containing a file called
+# DoxygenLayout.xml, Doxygen will parse it automatically even if the LAYOUT_FILE
# tag is left empty.
LAYOUT_FILE = _DoxyTemplates/Layout_forUser.xml
@@ -787,21 +850,37 @@ LAYOUT_FILE = _DoxyTemplates/Layout_forUser.xml
# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
# search path. See also \cite for info how to create references.
-CITE_BIB_FILES =
+CITE_BIB_FILES =
+
+# The EXTERNAL_TOOL_PATH tag can be used to extend the search path (PATH
+# environment variable) so that external tools such as latex and gs can be
+# found.
+# Note: Directories specified with EXTERNAL_TOOL_PATH are added in front of the
+# path already specified by the PATH variable, and are added in the order
+# specified.
+# Note: This option is particularly useful for macOS version 14 (Sonoma) and
+# higher, when running Doxygen from Doxywizard, because in this case any user-
+# defined changes to the PATH are ignored. A typical example on macOS is to set
+# EXTERNAL_TOOL_PATH = /Library/TeX/texbin /usr/local/bin
+# together with the standard path, the full search path used by doxygen when
+# launching external tools will then become
+# PATH=/Library/TeX/texbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin
+
+EXTERNAL_TOOL_PATH =
#---------------------------------------------------------------------------
# Configuration options related to warning and progress messages
#---------------------------------------------------------------------------
# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
+# standard output by Doxygen. If QUIET is set to YES this implies that the
# messages are off.
# The default value is: NO.
QUIET = YES
# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# generated to standard error (stderr) by Doxygen. If WARNINGS is set to YES
# this implies that the warnings are on.
#
# Tip: Turn warnings on while writing the documentation.
@@ -809,14 +888,14 @@ QUIET = YES
WARNINGS = YES
-# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then Doxygen will generate
# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
# will automatically be disabled.
# The default value is: YES.
WARN_IF_UNDOCUMENTED = YES
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# If the WARN_IF_DOC_ERROR tag is set to YES, Doxygen will generate warnings for
# potential errors in the documentation, such as documenting some parameters in
# a documented function twice, or documenting parameters that don't exist or
# using markup commands wrongly.
@@ -824,8 +903,8 @@ WARN_IF_UNDOCUMENTED = YES
WARN_IF_DOC_ERROR = YES
-# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete
-# function parameter documentation. If set to NO, doxygen will accept that some
+# If WARN_IF_INCOMPLETE_DOC is set to YES, Doxygen will warn about incomplete
+# function parameter documentation. If set to NO, Doxygen will accept that some
# parameters have no documentation without warning.
# The default value is: YES.
@@ -833,37 +912,75 @@ WARN_IF_INCOMPLETE_DOC = YES
# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
# are documented, but have no documentation for their parameters or return
-# value. If set to NO, doxygen will only warn about wrong parameter
+# value. If set to NO, Doxygen will only warn about wrong parameter
# documentation, but not about the absence of documentation. If EXTRACT_ALL is
# set to YES then this flag will automatically be disabled. See also
# WARN_IF_INCOMPLETE_DOC
# The default value is: NO.
WARN_NO_PARAMDOC = YES
-# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
+
+# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, Doxygen will warn about
+# undocumented enumeration values. If set to NO, Doxygen will accept
+# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: NO.
+
+WARN_IF_UNDOC_ENUM_VAL = NO
+
+# If WARN_LAYOUT_FILE option is set to YES, Doxygen will warn about issues found
+# while parsing the user defined layout file, such as missing or wrong elements.
+# See also LAYOUT_FILE for details. If set to NO, problems with the layout file
+# will be suppressed.
+# The default value is: YES.
+
+WARN_LAYOUT_FILE = YES
+
+# If the WARN_AS_ERROR tag is set to YES then Doxygen will immediately stop when
# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
-# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
-# at the end of the doxygen process doxygen will return with a non-zero status.
-# Possible values are: NO, YES and FAIL_ON_WARNINGS.
+# then Doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
+# at the end of the Doxygen process Doxygen will return with a non-zero status.
+# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then Doxygen behaves
+# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined Doxygen will not
+# write the warning messages in between other messages but write them at the end
+# of a run, in case a WARN_LOGFILE is defined the warning messages will be
+# besides being in the defined file also be shown at the end of a run, unless
+# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case
+# the behavior will remain as with the setting FAIL_ON_WARNINGS.
+# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT.
# The default value is: NO.
WARN_AS_ERROR = NO
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# The WARN_FORMAT tag determines the format of the warning messages that Doxygen
# can produce. The string should contain the $file, $line, and $text tags, which
# will be replaced by the file and line number from which the warning originated
# and the warning text. Optionally the format may contain $version, which will
# be replaced by the version of the file (if it could be obtained via
# FILE_VERSION_FILTER)
+# See also: WARN_LINE_FORMAT
# The default value is: $file:$line: $text.
WARN_FORMAT = "$file:$line: $text"
+# In the $text part of the WARN_FORMAT command it is possible that a reference
+# to a more specific place is given. To make it easier to jump to this place
+# (outside of Doxygen) the user can define a custom "cut" / "paste" string.
+# Example:
+# WARN_LINE_FORMAT = "'vi $file +$line'"
+# See also: WARN_FORMAT
+# The default value is: at line $line of file $file.
+
+WARN_LINE_FORMAT = "at line $line of file $file"
+
# The WARN_LOGFILE tag can be used to specify a file to which warning and error
# messages should be written. If left blank the output is written to standard
-# error (stderr).
+# error (stderr). In case the file specified cannot be opened for writing the
+# warning and error messages are written to standard error. When as file - is
+# specified the warning and error messages are written to standard output
+# (stdout).
-WARN_LOGFILE =
+WARN_LOGFILE =
#---------------------------------------------------------------------------
# Configuration options related to the input files
@@ -875,47 +992,57 @@ WARN_LOGFILE =
# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
# Note: If this tag is empty the current directory is searched.
-INPUT = CMSIS-RTOS2_Validation.txt \
- History.txt \
- ../Source/tf_main.c \
- ../Source/RV2_Kernel.c \
- ../Source/RV2_Thread.c \
+INPUT = CMSIS-RTOS2_Validation.txt \
+ History.txt \
+ ../Source/tf_main.c \
+ ../Source/RV2_Kernel.c \
+ ../Source/RV2_Thread.c \
../Source/RV2_ThreadFlags.c \
- ../Source/RV2_GenWait.c \
- ../Source/RV2_Timer.c \
- ../Source/RV2_EventFlags.c \
- ../Source/RV2_Mutex.c \
- ../Source/RV2_Semaphore.c \
- ../Source/RV2_MemoryPool.c \
+ ../Source/RV2_GenWait.c \
+ ../Source/RV2_Timer.c \
+ ../Source/RV2_EventFlags.c \
+ ../Source/RV2_Mutex.c \
+ ../Source/RV2_Semaphore.c \
+ ../Source/RV2_MemoryPool.c \
../Source/RV2_MessageQueue.c
-
# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# that Doxygen parses. Internally Doxygen uses the UTF-8 encoding. Doxygen uses
# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
# documentation (see:
# https://www.gnu.org/software/libiconv/) for the list of possible encodings.
+# See also: INPUT_FILE_ENCODING
# The default value is: UTF-8.
INPUT_ENCODING = UTF-8
+# This tag can be used to specify the character encoding of the source files
+# that Doxygen parses. The INPUT_FILE_ENCODING tag can be used to specify
+# character encoding on a per file pattern basis. Doxygen will compare the file
+# name with each pattern and apply the encoding instead of the default
+# INPUT_ENCODING if there is a match. The character encodings are a list of the
+# form: pattern=encoding (like *.php=ISO-8859-1).
+# See also: INPUT_ENCODING for further information on supported encodings.
+
+INPUT_FILE_ENCODING =
+
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
# *.h) to filter out the source-files in the directories.
#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# read by doxygen.
+# read by Doxygen.
#
# Note the list of default checked file patterns might differ from the list of
# default file extension mappings.
#
-# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
-# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
-# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml,
-# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C
-# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd,
-# *.vhdl, *.ucf, *.qsf and *.ice.
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm,
+# *.cpp, *.cppm, *.ccm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl,
+# *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.ixx, *.l, *.cs, *.d,
+# *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to
+# be provided as Doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
+# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice.
FILE_PATTERNS = *.c \
*.cc \
@@ -974,10 +1101,10 @@ RECURSIVE = YES
# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.
#
-# Note that relative paths are relative to the directory from which doxygen is
+# Note that relative paths are relative to the directory from which Doxygen is
# run.
-EXCLUDE =
+EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
@@ -993,31 +1120,28 @@ EXCLUDE_SYMLINKS = NO
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories for example use the pattern */test/*
-EXCLUDE_PATTERNS =
+EXCLUDE_PATTERNS =
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# (namespaces, classes, functions, etc.) that should be excluded from the
# output. The symbol name can be a fully qualified name, a word, or if the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
+# ANamespace::AClass, ANamespace::*Test
-EXCLUDE_SYMBOLS =
+EXCLUDE_SYMBOLS =
# The EXAMPLE_PATH tag can be used to specify one or more files or directories
# that contain example code fragments that are included (see the \include
# command).
-EXAMPLE_PATH =
+EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
# *.h) to filter out the source-files in the directories. If left blank all
# files are included.
-EXAMPLE_PATTERNS =
+EXAMPLE_PATTERNS =
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude commands
@@ -1032,7 +1156,7 @@ EXAMPLE_RECURSIVE = NO
IMAGE_PATH = images
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# The INPUT_FILTER tag can be used to specify a program that Doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command:
#
@@ -1047,11 +1171,16 @@ IMAGE_PATH = images
# code is scanned, but not when the output code is generated. If lines are added
# or removed, the anchors will not be placed correctly.
#
+# Note that Doxygen will use the data processed and written to standard output
+# for further processing, therefore nothing else, like debug statements or used
+# commands (so in case of a Windows batch file always use @echo OFF), should be
+# written to standard output.
+#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# properly processed by doxygen.
+# properly processed by Doxygen.
-INPUT_FILTER =
+INPUT_FILTER =
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis. Doxygen will compare the file name with each pattern and apply the
@@ -1062,9 +1191,9 @@ INPUT_FILTER =
#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# properly processed by doxygen.
+# properly processed by Doxygen.
-FILTER_PATTERNS =
+FILTER_PATTERNS =
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER) will also be used to filter the input files that are used for
@@ -1079,14 +1208,32 @@ FILTER_SOURCE_FILES = NO
# *.ext= (so without naming a filter).
# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-FILTER_SOURCE_PATTERNS =
+FILTER_SOURCE_PATTERNS =
# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
# is part of the input, its contents will be placed on the main page
# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
+# and want to reuse the introduction page also for the Doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
-USE_MDFILE_AS_MAINPAGE =
+# If the IMPLICIT_DIR_DOCS tag is set to YES, any README.md file found in sub-
+# directories of the project's root, is used as the documentation for that sub-
+# directory, except when the README.md starts with a \dir, \page or \mainpage
+# command. If set to NO, the README.md file needs to start with an explicit \dir
+# command in order to be used as directory documentation.
+# The default value is: YES.
+
+IMPLICIT_DIR_DOCS = YES
+
+# The Fortran standard specifies that for fixed formatted Fortran code all
+# characters from position 72 are to be considered as comment. A common
+# extension is to allow longer lines before the automatic comment starts. The
+# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can
+# be processed before the automatic comment starts.
+# Minimum value: 7, maximum value: 10000, default value: 72.
+
+FORTRAN_COMMENT_AFTER = 72
#---------------------------------------------------------------------------
# Configuration options related to source browsing
@@ -1102,12 +1249,13 @@ USE_MDFILE_AS_MAINPAGE =
SOURCE_BROWSER = NO
# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
+# multi-line macros, enums or list initialized variables directly into the
+# documentation.
# The default value is: NO.
INLINE_SOURCES = NO
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct Doxygen to hide any
# special comment blocks from generated source code fragments. Normal C, C++ and
# Fortran comments will always remain visible.
# The default value is: YES.
@@ -1145,7 +1293,7 @@ REFERENCES_LINK_SOURCE = YES
SOURCE_TOOLTIPS = YES
# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# point to the HTML generated by the htags(1) tool instead of Doxygen built-in
# source browser. The htags tool is part of GNU's global source tagging system
# (see https://www.gnu.org/software/global/global.html). You will need version
# 4.8.6 or higher.
@@ -1159,14 +1307,14 @@ SOURCE_TOOLTIPS = YES
# Doxygen will invoke htags (and that will in turn invoke gtags), so these
# tools must be available from the command line (i.e. in the search path).
#
-# The result: instead of the source browser generated by doxygen, the links to
+# The result: instead of the source browser generated by Doxygen, the links to
# source code will now point to the output of htags.
# The default value is: NO.
# This tag requires that the tag SOURCE_BROWSER is set to YES.
USE_HTAGS = NO
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# If the VERBATIM_HEADERS tag is set the YES then Doxygen will generate a
# verbatim copy of the header file for each class for which an include is
# specified. Set to NO to disable this.
# See also: Section \class.
@@ -1174,19 +1322,19 @@ USE_HTAGS = NO
VERBATIM_HEADERS = YES
-# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# If the CLANG_ASSISTED_PARSING tag is set to YES then Doxygen will use the
# clang parser (see:
# http://clang.llvm.org/) for more accurate parsing at the cost of reduced
# performance. This can be particularly helpful with template rich C++ code for
-# which doxygen's built-in parser lacks the necessary type information.
-# Note: The availability of this option depends on whether or not doxygen was
+# which Doxygen's built-in parser lacks the necessary type information.
+# Note: The availability of this option depends on whether or not Doxygen was
# generated with the -Duse_libclang=ON option for CMake.
# The default value is: NO.
CLANG_ASSISTED_PARSING = NO
# If the CLANG_ASSISTED_PARSING tag is set to YES and the CLANG_ADD_INC_PATHS
-# tag is set to YES then doxygen will add the directory of each input to the
+# tag is set to YES then Doxygen will add the directory of each input to the
# include path.
# The default value is: YES.
# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
@@ -1195,11 +1343,11 @@ CLANG_ADD_INC_PATHS = YES
# If clang assisted parsing is enabled you can provide the compiler with command
# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
+# the include paths will already be set by Doxygen for the files and directories
# specified with INPUT and INCLUDE_PATH.
# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-CLANG_OPTIONS =
+CLANG_OPTIONS =
# If clang assisted parsing is enabled you can provide the clang parser with the
# path to the directory containing a file called compile_commands.json. This
@@ -1209,7 +1357,7 @@ CLANG_OPTIONS =
# specifying the -p option to a clang tool, such as clang-check. These options
# will then be passed to the parser. Any options specified with CLANG_OPTIONS
# will be added as well.
-# Note: The availability of this option depends on whether or not doxygen was
+# Note: The availability of this option depends on whether or not Doxygen was
# generated with the -Duse_libclang=ON option for CMake.
CLANG_DATABASE_PATH =
@@ -1225,19 +1373,20 @@ CLANG_DATABASE_PATH =
ALPHABETICAL_INDEX = YES
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
+# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes)
+# that should be ignored while generating the index headers. The IGNORE_PREFIX
+# tag works for classes, function and member names. The entity will be placed in
+# the alphabetical list under the first letter of the entity name that remains
+# after removing the prefix.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-IGNORE_PREFIX =
+IGNORE_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the HTML output
#---------------------------------------------------------------------------
-# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# If the GENERATE_HTML tag is set to YES, Doxygen will generate HTML output
# The default value is: YES.
GENERATE_HTML = YES
@@ -1258,56 +1407,61 @@ HTML_OUTPUT = html
HTML_FILE_EXTENSION = .html
# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
+# each generated HTML page. If the tag is left blank Doxygen will generate a
# standard header.
#
# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
+# that Doxygen needs, which is dependent on the configuration options used (e.g.
# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
# default header using
# doxygen -w html new_header.html new_footer.html new_stylesheet.css
# YourConfigFile
# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
+# for information on how to generate the default header that Doxygen normally
# uses.
# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
+# default header when upgrading to a newer version of Doxygen. For a description
# of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_HEADER = _DoxyTemplates/header.html
# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
+# generated HTML page. If the tag is left blank Doxygen will generate a standard
# footer. See HTML_HEADER for more information on how to generate a default
# footer and what special commands can be used inside the footer. See also
# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
+# that Doxygen normally uses.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_FOOTER = _DoxyTemplates/footer.html
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
+# the HTML output. If left blank Doxygen will generate a default style sheet.
# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
+# sheet that Doxygen normally uses.
# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
# it is more robust and this tag (HTML_STYLESHEET) will in the future become
# obsolete.
# This tag requires that the tag GENERATE_HTML is set to YES.
-HTML_STYLESHEET =
+HTML_STYLESHEET =
# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
+# created by Doxygen. Using this option one can overrule certain style aspects.
# This is preferred over using HTML_STYLESHEET since it does not replace the
# standard style sheet and is therefore more robust against future updates.
# Doxygen will copy the style sheet files to the output directory.
# Note: The order of the extra style sheet files is of importance (e.g. the last
# style sheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
+# list).
+# Note: Since the styling of scrollbars can currently not be overruled in
+# Webkit/Chromium, the styling will be left out of the default doxygen.css if
+# one or more extra stylesheets have been specified. So if scrollbar
+# customization is desired it has to be added explicitly. For an example see the
+# documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_EXTRA_STYLESHEET = ./_DoxyTemplates/extra_stylesheet.css
@@ -1327,6 +1481,19 @@ HTML_EXTRA_FILES = _DoxyTemplates/tabs.css \
_DoxyTemplates/check.png \
_DoxyTemplates/navtree.css
+# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output
+# should be rendered with a dark or light theme.
+# Possible values are: LIGHT always generates light mode output, DARK always
+# generates dark mode output, AUTO_LIGHT automatically sets the mode according
+# to the user preference, uses light mode if no preference is set (the default),
+# AUTO_DARK automatically sets the mode according to the user preference, uses
+# dark mode if no preference is set and TOGGLE allows a user to switch between
+# light and dark mode via a button.
+# The default value is: AUTO_LIGHT.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE = AUTO_LIGHT
+
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
# will adjust the colors in the style sheet and background images according to
# this color. Hue is specified as an angle on a color-wheel, see
@@ -1357,15 +1524,6 @@ HTML_COLORSTYLE_SAT = 100
HTML_COLORSTYLE_GAMMA = 80
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to YES can help to show when doxygen was last run and thus if the
-# documentation is up to date.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP = YES
-
# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
# documentation will contain a main index with vertical navigation menus that
# are dynamically created via JavaScript. If disabled, the navigation index will
@@ -1385,6 +1543,33 @@ HTML_DYNAMIC_MENUS = NO
HTML_DYNAMIC_SECTIONS = NO
+# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be
+# dynamically folded and expanded in the generated HTML source code.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_CODE_FOLDING = YES
+
+# If the HTML_COPY_CLIPBOARD tag is set to YES then Doxygen will show an icon in
+# the top right corner of code and text fragments that allows the user to copy
+# its content to the clipboard. Note this only works if supported by the browser
+# and the web page is served via a secure context (see:
+# https://www.w3.org/TR/secure-contexts/), i.e. using the https: or file:
+# protocol.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COPY_CLIPBOARD = YES
+
+# Doxygen stores a couple of settings persistently in the browser (via e.g.
+# cookies). By default these settings apply to all HTML pages generated by
+# Doxygen across all projects. The HTML_PROJECT_COOKIE tag can be used to store
+# the settings under a project specific key, such that the user preferences will
+# be stored separately.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_PROJECT_COOKIE =
+
# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
# shown in the various tree structured indices initially; the user can expand
# and collapse entries dynamically later on. Doxygen will expand the tree to
@@ -1402,7 +1587,7 @@ HTML_INDEX_NUM_ENTRIES = 100
# generated that can be used as input for Apple's Xcode 3 integrated development
# environment (see:
# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To
-# create a documentation set, doxygen will generate a Makefile in the HTML
+# create a documentation set, Doxygen will generate a Makefile in the HTML
# output directory. Running make will produce the docset in that directory and
# running make install will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
@@ -1421,6 +1606,13 @@ GENERATE_DOCSET = NO
DOCSET_FEEDNAME = "Doxygen generated docs"
+# This tag determines the URL of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDURL =
+
# This tag specifies a string that should uniquely identify the documentation
# set bundle. This should be a reverse domain-name style string, e.g.
# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
@@ -1443,18 +1635,18 @@ DOCSET_PUBLISHER_ID = org.doxygen.Publisher
DOCSET_PUBLISHER_NAME = Publisher
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# If the GENERATE_HTMLHELP tag is set to YES then Doxygen generates three
# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
# on Windows. In the beginning of 2021 Microsoft took the original page, with
-# a.o. the download links, offline the HTML help workshop was already many years
-# in maintenance mode). You can download the HTML help workshop from the web
-# archives at Installation executable (see:
+# a.o. the download links, offline (the HTML help workshop was already many
+# years in maintenance mode). You can download the HTML help workshop from the
+# web archives at Installation executable (see:
# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo
# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe).
#
# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# generated by Doxygen into a single compiled HTML file (.chm). Compiled HTML
# files are now used as the Windows 98 help format, and will replace the old
# Windows help format (.hlp) on all Windows platforms in the future. Compressed
# HTML files also contain an index, a table of contents, and you can search for
@@ -1470,15 +1662,15 @@ GENERATE_HTMLHELP = NO
# written to the html output directory.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-CHM_FILE =
+CHM_FILE =
# The HHC_LOCATION tag can be used to specify the location (absolute path
# including file name) of the HTML help compiler (hhc.exe). If non-empty,
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# Doxygen will try to run the HTML help compiler on the generated index.hhp.
# The file has to be specified with full path.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-HHC_LOCATION =
+HHC_LOCATION =
# The GENERATE_CHI flag controls if a separate .chi index file is generated
# (YES) or that it should be included in the main .chm file (NO).
@@ -1491,7 +1683,7 @@ GENERATE_CHI = NO
# and project file content.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-CHM_INDEX_ENCODING =
+CHM_INDEX_ENCODING =
# The BINARY_TOC flag controls whether a binary table of contents is generated
# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
@@ -1508,6 +1700,16 @@ BINARY_TOC = NO
TOC_EXPAND = NO
+# The SITEMAP_URL tag is used to specify the full URL of the place where the
+# generated documentation will be placed on the server by the user during the
+# deployment of the documentation. The generated sitemap is called sitemap.xml
+# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL
+# is specified no sitemap is generated. For information about the sitemap
+# protocol see https://www.sitemaps.org
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SITEMAP_URL =
+
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
@@ -1522,7 +1724,7 @@ GENERATE_QHP = NO
# the HTML output folder.
# This tag requires that the tag GENERATE_QHP is set to YES.
-QCH_FILE =
+QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
# Project output. For more information please see Qt Help Project / Namespace
@@ -1548,7 +1750,7 @@ QHP_VIRTUAL_FOLDER = doc
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
-QHP_CUST_FILTER_NAME =
+QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see Qt Help Project / Custom
@@ -1556,21 +1758,21 @@ QHP_CUST_FILTER_NAME =
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
-QHP_CUST_FILTER_ATTRS =
+QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
# project's filter section matches. Qt Help Project / Filter Attributes (see:
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
# This tag requires that the tag GENERATE_QHP is set to YES.
-QHP_SECT_FILTER_ATTRS =
+QHP_SECT_FILTER_ATTRS =
# The QHG_LOCATION tag can be used to specify the location (absolute path
-# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
+# including file name) of Qt's qhelpgenerator. If non-empty Doxygen will try to
# run qhelpgenerator on the generated .qhp file.
# This tag requires that the tag GENERATE_QHP is set to YES.
-QHG_LOCATION =
+QHG_LOCATION =
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
# generated, together with the HTML files, they form an Eclipse help plugin. To
@@ -1598,7 +1800,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project
# of each HTML page. A value of NO enables the index and the value YES disables
# it. Since the tabs in the index contain the same information as the navigation
# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
+# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.
DISABLE_INDEX = YES
@@ -1611,11 +1813,11 @@ DISABLE_INDEX = YES
# (i.e. any modern browser). Windows users are probably better off using the
# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
# further fine tune the look of the index (see "Fine-tuning the output"). As an
-# example, the default style sheet generated by doxygen has an example that
+# example, the default style sheet generated by Doxygen has an example that
# shows how to put an image at the root of the tree instead of the PROJECT_NAME.
# Since the tree basically has the same information as the tab index, you could
# consider setting DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
+# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.
GENERATE_TREEVIEW = YES
@@ -1625,7 +1827,7 @@ GENERATE_TREEVIEW = YES
# area (value NO) or if it should extend to the full height of the window (value
# YES). Setting this to YES gives a layout similar to
# https://docs.readthedocs.io with more room for contents, but less room for the
-# project logo, title, and description. If either GENERATOR_TREEVIEW or
+# project logo, title, and description. If either GENERATE_TREEVIEW or
# DISABLE_INDEX is set to NO, this option has no effect.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1633,7 +1835,7 @@ GENERATE_TREEVIEW = YES
FULL_SIDEBAR = NO
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
+# Doxygen will group on one line in the generated HTML documentation.
#
# Note that a value of 0 will completely suppress the enum values from appearing
# in the overview section.
@@ -1642,6 +1844,12 @@ FULL_SIDEBAR = NO
ENUM_VALUES_PER_LINE = 1
+# When the SHOW_ENUM_VALUES tag is set doxygen will show the specified
+# enumeration values besides the enumeration mnemonics.
+# The default value is: NO.
+
+SHOW_ENUM_VALUES = NO
+
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
# to set the initial width (in pixels) of the frame in which the tree is shown.
# Minimum value: 0, maximum value: 1500, default value: 250.
@@ -1649,14 +1857,21 @@ ENUM_VALUES_PER_LINE = 1
TREEVIEW_WIDTH = 250
-# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# If the EXT_LINKS_IN_WINDOW option is set to YES, Doxygen will open links to
# external symbols imported via tag files in a separate window.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
EXT_LINKS_IN_WINDOW = NO
-# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg
+# If the OBFUSCATE_EMAILS tag is set to YES, Doxygen will obfuscate email
+# addresses.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+OBFUSCATE_EMAILS = YES
+
+# If the HTML_FORMULA_FORMAT option is set to svg, Doxygen will use the pdf2svg
# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see
# https://inkscape.org) to generate formulas as SVG images instead of PNGs for
# the HTML output. These images will generally look nicer at scaled resolutions.
@@ -1669,24 +1884,13 @@ HTML_FORMULA_FORMAT = png
# Use this tag to change the font size of LaTeX formulas included as images in
# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
+# Doxygen run you need to manually remove any form_*.png images from the HTML
# output directory to force them to be regenerated.
# Minimum value: 8, maximum value: 50, default value: 10.
# This tag requires that the tag GENERATE_HTML is set to YES.
FORMULA_FONTSIZE = 10
-# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT = YES
-
# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands
# to create new LaTeX commands to be used in formulas as building blocks. See
# the section "Including formulas" for details.
@@ -1724,7 +1928,7 @@ MATHJAX_VERSION = MathJax_2
# Possible values are: HTML-CSS (which is slower, but has the best
# compatibility. This is the name for Mathjax version 2, for MathJax version 3
# this will be translated into chtml), NativeMML (i.e. MathML. Only supported
-# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This
+# for MathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This
# is the name for Mathjax version 3, for MathJax version 2 this will be
# translated into HTML-CSS) and SVG.
# The default value is: HTML-CSS.
@@ -1756,23 +1960,23 @@ MATHJAX_RELPATH =
# MATHJAX_EXTENSIONS = ams
# This tag requires that the tag USE_MATHJAX is set to YES.
-MATHJAX_EXTENSIONS =
+MATHJAX_EXTENSIONS =
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# The MATHJAX_CODEFILE tag can be used to specify a file with JavaScript pieces
# of code that will be used on startup of the MathJax code. See the MathJax site
# (see:
# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an
# example see the documentation.
# This tag requires that the tag USE_MATHJAX is set to YES.
-MATHJAX_CODEFILE =
+MATHJAX_CODEFILE =
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
+# When the SEARCHENGINE tag is enabled Doxygen will generate a search box for
+# the HTML output. The underlying search engine uses JavaScript and DHTML and
# should work on any modern browser. Note that when using HTML help
# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
+# For large projects the JavaScript based search engine can be slow, then
# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
# search using the keyboard; to jump to the search box use + S
# (what the is depends on the OS and browser, but it is typically
@@ -1789,9 +1993,9 @@ MATHJAX_CODEFILE =
SEARCHENGINE = YES
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
+# implemented using a web server instead of a web client using JavaScript. There
# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
+# setting. When disabled, Doxygen will generate a PHP script for searching and
# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
# and searching needs to be provided by external tools. See the section
# "External Indexing and Searching" for details.
@@ -1800,7 +2004,7 @@ SEARCHENGINE = YES
SERVER_BASED_SEARCH = NO
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# When EXTERNAL_SEARCH tag is enabled Doxygen will no longer generate the PHP
# script for searching. Instead the search results are written to an XML file
# which needs to be processed by an external indexer. Doxygen will invoke an
# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
@@ -1827,7 +2031,7 @@ EXTERNAL_SEARCH = NO
# details.
# This tag requires that the tag SEARCHENGINE is set to YES.
-SEARCHENGINE_URL =
+SEARCHENGINE_URL =
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
# search data is written to a file for indexing by an external tool. With the
@@ -1843,9 +2047,9 @@ SEARCHDATA_FILE = searchdata.xml
# projects and redirect the results back to the right project.
# This tag requires that the tag SEARCHENGINE is set to YES.
-EXTERNAL_SEARCH_ID =
+EXTERNAL_SEARCH_ID =
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through Doxygen
# projects other than the one defined by this configuration file, but that are
# all added to the same external search index. Each project needs to have a
# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
@@ -1853,13 +2057,13 @@ EXTERNAL_SEARCH_ID =
# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
# This tag requires that the tag SEARCHENGINE is set to YES.
-EXTRA_SEARCH_MAPPINGS =
+EXTRA_SEARCH_MAPPINGS =
#---------------------------------------------------------------------------
# Configuration options related to the LaTeX output
#---------------------------------------------------------------------------
-# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# If the GENERATE_LATEX tag is set to YES, Doxygen will generate LaTeX output.
# The default value is: YES.
GENERATE_LATEX = NO
@@ -1904,7 +2108,7 @@ MAKEINDEX_CMD_NAME = makeindex
LATEX_MAKEINDEX_CMD = makeindex
-# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# If the COMPACT_LATEX tag is set to YES, Doxygen generates more compact LaTeX
# documents. This may be useful for small projects and may help to save some
# trees in general.
# The default value is: NO.
@@ -1931,40 +2135,40 @@ PAPER_TYPE = a4
# If left blank no extra packages will be included.
# This tag requires that the tag GENERATE_LATEX is set to YES.
-EXTRA_PACKAGES =
+EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for
# the generated LaTeX document. The header should contain everything until the
-# first chapter. If it is left blank doxygen will generate a standard header. It
+# first chapter. If it is left blank Doxygen will generate a standard header. It
# is highly recommended to start with a default header using
# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty
# and then modify the file new_header.tex. See also section "Doxygen usage" for
-# information on how to generate the default header that doxygen normally uses.
+# information on how to generate the default header that Doxygen normally uses.
#
# Note: Only use a user-defined header if you know what you are doing!
# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. The following
+# default header when upgrading to a newer version of Doxygen. The following
# commands have a special meaning inside the header (and footer): For a
# description of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_LATEX is set to YES.
-LATEX_HEADER =
+LATEX_HEADER =
# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for
# the generated LaTeX document. The footer should contain everything after the
-# last chapter. If it is left blank doxygen will generate a standard footer. See
+# last chapter. If it is left blank Doxygen will generate a standard footer. See
# LATEX_HEADER for more information on how to generate a default footer and what
# special commands can be used inside the footer. See also section "Doxygen
-# usage" for information on how to generate the default footer that doxygen
+# usage" for information on how to generate the default footer that Doxygen
# normally uses. Note: Only use a user-defined footer if you know what you are
# doing!
# This tag requires that the tag GENERATE_LATEX is set to YES.
-LATEX_FOOTER =
+LATEX_FOOTER =
# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
# LaTeX style sheets that are included after the standard style sheets created
-# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# by Doxygen. Using this option one can overrule certain style aspects. Doxygen
# will copy the style sheet files to the output directory.
# Note: The order of the extra style sheet files is of importance (e.g. the last
# style sheet in the list overrules the setting of the previous ones in the
@@ -1979,7 +2183,7 @@ LATEX_EXTRA_STYLESHEET =
# markers available.
# This tag requires that the tag GENERATE_LATEX is set to YES.
-LATEX_EXTRA_FILES =
+LATEX_EXTRA_FILES =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
@@ -1990,7 +2194,7 @@ LATEX_EXTRA_FILES =
PDF_HYPERLINKS = YES
-# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
+# If the USE_PDFLATEX tag is set to YES, Doxygen will use the engine as
# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX
# files. Set this option to YES, to get a higher quality PDF documentation.
#
@@ -2000,15 +2204,22 @@ PDF_HYPERLINKS = YES
USE_PDFLATEX = YES
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help.
+# The LATEX_BATCHMODE tag signals the behavior of LaTeX in case of an error.
+# Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch
+# mode nothing is printed on the terminal, errors are scrolled as if is
+# hit at every error; missing files that TeX tries to input or request from
+# keyboard input (\read on a not open input stream) cause the job to abort,
+# NON_STOP In nonstop mode the diagnostic message will appear on the terminal,
+# but there is no possibility of user interaction just like in batch mode,
+# SCROLL In scroll mode, TeX will stop only for missing files to input or if
+# keyboard input is necessary and ERROR_STOP In errorstop mode, TeX will stop at
+# each error, asking for user intervention.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_BATCHMODE = NO
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# If the LATEX_HIDE_INDICES tag is set to YES then Doxygen will not include the
# index chapters (such as File Index, Compound Index, etc.) in the output.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.
@@ -2018,19 +2229,11 @@ LATEX_HIDE_INDICES = NO
# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
# bibliography, e.g. plainnat, or ieeetr. See
# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
+# The default value is: plainnat.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_BIB_STYLE = plain
-# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_TIMESTAMP = NO
-
# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute)
# path from which the emoji images will be read. If a relative path is entered,
# it will be relative to the LATEX_OUTPUT directory. If left blank the
@@ -2043,7 +2246,7 @@ LATEX_EMOJI_DIRECTORY =
# Configuration options related to the RTF output
#---------------------------------------------------------------------------
-# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# If the GENERATE_RTF tag is set to YES, Doxygen will generate RTF output. The
# RTF output is optimized for Word 97 and may not look too pretty with other RTF
# readers/editors.
# The default value is: NO.
@@ -2058,7 +2261,7 @@ GENERATE_RTF = NO
RTF_OUTPUT = rtf
-# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# If the COMPACT_RTF tag is set to YES, Doxygen generates more compact RTF
# documents. This may be useful for small projects and may help to save some
# trees in general.
# The default value is: NO.
@@ -2078,28 +2281,36 @@ COMPACT_RTF = NO
RTF_HYPERLINKS = NO
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# Load stylesheet definitions from file. Syntax is similar to Doxygen's
# configuration file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value.
#
# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
+# default style sheet that Doxygen normally uses.
# This tag requires that the tag GENERATE_RTF is set to YES.
-RTF_STYLESHEET_FILE =
+RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's configuration file. A template extensions file can be
+# similar to Doxygen's configuration file. A template extensions file can be
# generated using doxygen -e rtf extensionFile.
# This tag requires that the tag GENERATE_RTF is set to YES.
-RTF_EXTENSIONS_FILE =
+RTF_EXTENSIONS_FILE =
+
+# The RTF_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the RTF_OUTPUT output directory.
+# Note that the files will be copied as-is; there are no commands or markers
+# available.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTRA_FILES =
#---------------------------------------------------------------------------
# Configuration options related to the man page output
#---------------------------------------------------------------------------
-# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# If the GENERATE_MAN tag is set to YES, Doxygen will generate man pages for
# classes and files.
# The default value is: NO.
@@ -2130,7 +2341,7 @@ MAN_EXTENSION = .3
MAN_SUBDIR =
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output, then it
# will generate one additional man file for each entity documented in the real
# man page(s). These additional files only source the real man page, but without
# them the man command would be unable to find the correct page.
@@ -2143,7 +2354,7 @@ MAN_LINKS = NO
# Configuration options related to the XML output
#---------------------------------------------------------------------------
-# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# If the GENERATE_XML tag is set to YES, Doxygen will generate an XML file that
# captures the structure of the code including all documentation.
# The default value is: NO.
@@ -2157,7 +2368,7 @@ GENERATE_XML = NO
XML_OUTPUT = xml
-# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# If the XML_PROGRAMLISTING tag is set to YES, Doxygen will dump the program
# listings (including syntax highlighting and cross-referencing information) to
# the XML output. Note that enabling this will significantly increase the size
# of the XML output.
@@ -2166,7 +2377,7 @@ XML_OUTPUT = xml
XML_PROGRAMLISTING = YES
-# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include
+# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, Doxygen will include
# namespace members in file scope as well, matching the HTML output.
# The default value is: NO.
# This tag requires that the tag GENERATE_XML is set to YES.
@@ -2177,7 +2388,7 @@ XML_NS_MEMB_FILE_SCOPE = NO
# Configuration options related to the DOCBOOK output
#---------------------------------------------------------------------------
-# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# If the GENERATE_DOCBOOK tag is set to YES, Doxygen will generate Docbook files
# that can be used to generate PDF.
# The default value is: NO.
@@ -2195,19 +2406,45 @@ DOCBOOK_OUTPUT = docbook
# Configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
-# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, Doxygen will generate an
+# AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures
# the structure of the code including all documentation. Note that this feature
# is still experimental and incomplete at the moment.
# The default value is: NO.
GENERATE_AUTOGEN_DEF = NO
+#---------------------------------------------------------------------------
+# Configuration options related to Sqlite3 output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_SQLITE3 tag is set to YES Doxygen will generate a Sqlite3
+# database with symbols found by Doxygen stored in tables.
+# The default value is: NO.
+
+GENERATE_SQLITE3 = NO
+
+# The SQLITE3_OUTPUT tag is used to specify where the Sqlite3 database will be
+# put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put
+# in front of it.
+# The default directory is: sqlite3.
+# This tag requires that the tag GENERATE_SQLITE3 is set to YES.
+
+SQLITE3_OUTPUT = sqlite3
+
+# The SQLITE3_RECREATE_DB tag is set to YES, the existing doxygen_sqlite3.db
+# database file will be recreated with each Doxygen run. If set to NO, Doxygen
+# will warn if a database file is already found and not modify it.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_SQLITE3 is set to YES.
+
+SQLITE3_RECREATE_DB = YES
+
#---------------------------------------------------------------------------
# Configuration options related to the Perl module output
#---------------------------------------------------------------------------
-# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# If the GENERATE_PERLMOD tag is set to YES, Doxygen will generate a Perl module
# file that captures the structure of the code including all documentation.
#
# Note that this feature is still experimental and incomplete at the moment.
@@ -2215,7 +2452,7 @@ GENERATE_AUTOGEN_DEF = NO
GENERATE_PERLMOD = NO
-# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# If the PERLMOD_LATEX tag is set to YES, Doxygen will generate the necessary
# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
# output from the Perl module output.
# The default value is: NO.
@@ -2239,19 +2476,19 @@ PERLMOD_PRETTY = YES
# overwrite each other's variables.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-PERLMOD_MAKEVAR_PREFIX =
+PERLMOD_MAKEVAR_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the preprocessor
#---------------------------------------------------------------------------
-# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# If the ENABLE_PREPROCESSING tag is set to YES, Doxygen will evaluate all
# C-preprocessor directives found in the sources and include files.
# The default value is: YES.
ENABLE_PREPROCESSING = YES
-# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# If the MACRO_EXPANSION tag is set to YES, Doxygen will expand all macro names
# in the source code. If set to NO, only conditional compilation will be
# performed. Macro expansion can be done in a controlled way by setting
# EXPAND_ONLY_PREDEF to YES.
@@ -2277,10 +2514,11 @@ SEARCH_INCLUDES = YES
# The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by the
-# preprocessor.
+# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of
+# RECURSIVE has no effect here.
# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-INCLUDE_PATH =
+INCLUDE_PATH =
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the
@@ -2288,7 +2526,7 @@ INCLUDE_PATH =
# used.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-INCLUDE_FILE_PATTERNS =
+INCLUDE_FILE_PATTERNS =
# The PREDEFINED tag can be used to specify one or more macro names that are
# defined before the preprocessor is started (similar to the -D option of e.g.
@@ -2307,9 +2545,9 @@ PREDEFINED =
# definition found in the source code.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-EXPAND_AS_DEFINED =
+EXPAND_AS_DEFINED =
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# If the SKIP_FUNCTION_MACROS tag is set to YES then Doxygen's preprocessor will
# remove all references to function-like macros that are alone on a line, have
# an all uppercase name, and do not end with a semicolon. Such function macros
# are typically used for boiler-plate code, and will confuse the parser if not
@@ -2333,26 +2571,26 @@ SKIP_FUNCTION_MACROS = YES
# section "Linking to external documentation" for more information about the use
# of tag files.
# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
+# the path). If a tag file is not located in the directory in which Doxygen is
# run, you must also specify the path to the tagfile here.
-TAGFILES =
+TAGFILES =
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# When a file name is specified after GENERATE_TAGFILE, Doxygen will create a
# tag file that is based on the input files it reads. See section "Linking to
# external documentation" for more information about the usage of tag files.
-GENERATE_TAGFILE =
+GENERATE_TAGFILE =
-# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
-# the class index. If set to NO, only the inherited external classes will be
-# listed.
+# If the ALLEXTERNALS tag is set to YES, all external classes and namespaces
+# will be listed in the class and namespace index. If set to NO, only the
+# inherited external classes will be listed.
# The default value is: NO.
ALLEXTERNALS = NO
# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will be
+# in the topic index. If set to NO, only the current project's groups will be
# listed.
# The default value is: YES.
@@ -2366,42 +2604,26 @@ EXTERNAL_GROUPS = YES
EXTERNAL_PAGES = YES
#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
+# Configuration options related to diagram generator tools
#---------------------------------------------------------------------------
-# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS = YES
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH =
-
# If set to YES the inheritance and collaboration graphs will hide inheritance
# and usage relations if the target is undocumented or is not a class.
# The default value is: YES.
HIDE_UNDOC_RELATIONS = YES
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# If you set the HAVE_DOT tag to YES then Doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
# Bell Labs. The other options in this section have no effect if this option is
# set to NO
# The default value is: NO.
HAVE_DOT = NO
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
+# The DOT_NUM_THREADS specifies the number of dot invocations Doxygen is allowed
+# to run in parallel. When set to 0 Doxygen will base this on the number of
# processors available in the system. You can set it explicitly to a value
# larger than 0 to get control over the balance between CPU load and processing
# speed.
@@ -2410,55 +2632,83 @@ HAVE_DOT = NO
DOT_NUM_THREADS = 0
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
+# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of
+# subgraphs. When you want a differently looking font in the dot files that
+# Doxygen generates you can specify fontname, fontcolor and fontsize attributes.
+# For details please see Node,
+# Edge and Graph Attributes specification You need to make sure dot is able
+# to find the font, which can be done by putting it in a standard location or by
+# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font. Default graphviz fontsize is 14.
+# The default value is: fontname=Helvetica,fontsize=10.
# This tag requires that the tag HAVE_DOT is set to YES.
-DOT_FONTNAME = Helvetica
+DOT_COMMON_ATTR = "fontname=Helvetica,fontsize=10"
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
+# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can
+# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. Complete documentation about
+# arrows shapes.
+# The default value is: labelfontname=Helvetica,labelfontsize=10.
# This tag requires that the tag HAVE_DOT is set to YES.
-DOT_FONTSIZE = 10
+DOT_EDGE_ATTR = "labelfontname=Helvetica,labelfontsize=10"
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
+# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes
+# around nodes set 'shape=plain' or 'shape=plaintext' Shapes specification
+# The default value is: shape=box,height=0.2,width=0.4.
# This tag requires that the tag HAVE_DOT is set to YES.
-DOT_FONTPATH =
+DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4"
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
+# You can set the path where dot can find font specified with fontname in
+# DOT_COMMON_ATTR and others dot attributes.
# This tag requires that the tag HAVE_DOT is set to YES.
+DOT_FONTPATH =
+
+# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then Doxygen will
+# generate a graph for each documented class showing the direct and indirect
+# inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and
+# HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case
+# the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the
+# CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used.
+# If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance
+# relations will be shown as texts / links. Explicit enabling an inheritance
+# graph or choosing a different representation for an inheritance graph of a
+# specific class, can be accomplished by means of the command \inheritancegraph.
+# Disabling an inheritance graph can be accomplished by means of the command
+# \hideinheritancegraph.
+# Possible values are: NO, YES, TEXT, GRAPH and BUILTIN.
+# The default value is: YES.
+
CLASS_GRAPH = YES
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# If the COLLABORATION_GRAPH tag is set to YES then Doxygen will generate a
# graph for each documented class showing the direct and indirect implementation
# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
+# class with other documented classes. Explicit enabling a collaboration graph,
+# when COLLABORATION_GRAPH is set to NO, can be accomplished by means of the
+# command \collaborationgraph. Disabling a collaboration graph can be
+# accomplished by means of the command \hidecollaborationgraph.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
COLLABORATION_GRAPH = YES
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
+# If the GROUP_GRAPHS tag is set to YES then Doxygen will generate a graph for
+# groups, showing the direct groups dependencies. Explicit enabling a group
+# dependency graph, when GROUP_GRAPHS is set to NO, can be accomplished by means
+# of the command \groupgraph. Disabling a directory graph can be accomplished by
+# means of the command \hidegroupgraph. See also the chapter Grouping in the
+# manual.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
GROUP_GRAPHS = YES
-# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# If the UML_LOOK tag is set to YES, Doxygen will generate inheritance and
# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language.
# The default value is: NO.
@@ -2479,10 +2729,10 @@ UML_LOOK = NO
UML_LIMIT_NUM_FIELDS = 10
-# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and
+# If the DOT_UML_DETAILS tag is set to NO, Doxygen will show attributes and
# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS
-# tag is set to YES, doxygen will add type and arguments for attributes and
-# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen
+# tag is set to YES, Doxygen will add type and arguments for attributes and
+# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, Doxygen
# will not generate fields with class member information in the UML graphs. The
# class diagrams will look similar to the default class diagrams but using UML
# notation for the relationships.
@@ -2494,8 +2744,8 @@ DOT_UML_DETAILS = NO
# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters
# to display on a single line. If the actual line length exceeds this threshold
-# significantly it will wrapped across multiple lines. Some heuristics are apply
-# to avoid ugly line breaks.
+# significantly it will be wrapped across multiple lines. Some heuristics are
+# applied to avoid ugly line breaks.
# Minimum value: 0, maximum value: 1000, default value: 17.
# This tag requires that the tag HAVE_DOT is set to YES.
@@ -2510,24 +2760,29 @@ DOT_WRAP_THRESHOLD = 17
TEMPLATE_RELATIONS = NO
# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
+# YES then Doxygen will generate a graph for each documented file showing the
# direct and indirect include dependencies of the file with other documented
-# files.
+# files. Explicit enabling an include graph, when INCLUDE_GRAPH is is set to NO,
+# can be accomplished by means of the command \includegraph. Disabling an
+# include graph can be accomplished by means of the command \hideincludegraph.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
INCLUDE_GRAPH = YES
# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
+# set to YES then Doxygen will generate a graph for each documented file showing
# the direct and indirect include dependencies of the file with other documented
-# files.
+# files. Explicit enabling an included by graph, when INCLUDED_BY_GRAPH is set
+# to NO, can be accomplished by means of the command \includedbygraph. Disabling
+# an included by graph can be accomplished by means of the command
+# \hideincludedbygraph.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
INCLUDED_BY_GRAPH = YES
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# If the CALL_GRAPH tag is set to YES then Doxygen will generate a call
# dependency graph for every global function or class method.
#
# Note that enabling this option will significantly increase the time of a run.
@@ -2539,7 +2794,7 @@ INCLUDED_BY_GRAPH = YES
CALL_GRAPH = NO
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# If the CALLER_GRAPH tag is set to YES then Doxygen will generate a caller
# dependency graph for every global function or class method.
#
# Note that enabling this option will significantly increase the time of a run.
@@ -2551,44 +2806,59 @@ CALL_GRAPH = NO
CALLER_GRAPH = NO
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# If the GRAPHICAL_HIERARCHY tag is set to YES then Doxygen will graphical
# hierarchy of all classes instead of a textual one.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
GRAPHICAL_HIERARCHY = YES
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# If the DIRECTORY_GRAPH tag is set to YES then Doxygen will show the
# dependencies a directory has on other directories in a graphical way. The
# dependency relations are determined by the #include relations between the
-# files in the directories.
+# files in the directories. Explicit enabling a directory graph, when
+# DIRECTORY_GRAPH is set to NO, can be accomplished by means of the command
+# \directorygraph. Disabling a directory graph can be accomplished by means of
+# the command \hidedirectorygraph.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
DIRECTORY_GRAPH = YES
+# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels
+# of child directories generated in directory dependency graphs by dot.
+# Minimum value: 1, maximum value: 25, default value: 1.
+# This tag requires that the tag DIRECTORY_GRAPH is set to YES.
+
+DIR_GRAPH_MAX_DEPTH = 1
+
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. For an explanation of the image formats see the section
# output formats in the documentation of the dot tool (Graphviz (see:
-# http://www.graphviz.org/)).
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
+# https://www.graphviz.org/)).
+#
+# Note the formats svg:cairo and svg:cairo:cairo cannot be used in combination
+# with INTERACTIVE_SVG (the INTERACTIVE_SVG will be set to NO).
# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
-# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
-# png:gdiplus:gdiplus.
+# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus,
+# png:gdiplus:gdiplus, svg:cairo, svg:cairo:cairo, svg:svg, svg:svg:core,
+# gif:cairo, gif:cairo:gd, gif:cairo:gdiplus, gif:gdiplus, gif:gdiplus:gdiplus,
+# gif:gd, gif:gd:gd, jpg:cairo, jpg:cairo:gd, jpg:cairo:gdiplus, jpg:gd,
+# jpg:gd:gd, jpg:gdiplus and jpg:gdiplus:gdiplus.
# The default value is: png.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_IMAGE_FORMAT = png
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
+# If DOT_IMAGE_FORMAT is set to svg or svg:svg or svg:svg:core, then this option
+# can be set to YES to enable generation of interactive SVG images that allow
+# zooming and panning.
#
# Note that this requires a modern browser other than Internet Explorer. Tested
# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
+#
+# Note This option will be automatically disabled when DOT_IMAGE_FORMAT is set
+# to svg:cairo or svg:cairo:cairo.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.
@@ -2598,49 +2868,56 @@ INTERACTIVE_SVG = NO
# found. If left blank, it is assumed the dot tool can be found in the path.
# This tag requires that the tag HAVE_DOT is set to YES.
-DOT_PATH =
+DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the \dotfile
# command).
# This tag requires that the tag HAVE_DOT is set to YES.
-DOTFILE_DIRS =
+DOTFILE_DIRS =
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
+# You can include diagrams made with dia in Doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
-MSCFILE_DIRS =
+DIA_PATH =
# The DIAFILE_DIRS tag can be used to specify one or more directories that
# contain dia files that are included in the documentation (see the \diafile
# command).
-DIAFILE_DIRS =
+DIAFILE_DIRS =
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
+# When using PlantUML, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file or to the filename of jar file
+# to be used. If left blank, it is assumed PlantUML is not used or called during
+# a preprocessing step. Doxygen will generate a warning when it encounters a
+# \startuml command in this case and will not generate output for the diagram.
PLANTUML_JAR_PATH =
-# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
-# configuration file for plantuml.
+# When using PlantUML, the PLANTUML_CFG_FILE tag can be used to specify a
+# configuration file for PlantUML.
PLANTUML_CFG_FILE =
-# When using plantuml, the specified paths are searched for files specified by
-# the !include statement in a plantuml block.
+# When using PlantUML, the specified paths are searched for files specified by
+# the !include statement in a PlantUML block.
PLANTUML_INCLUDE_PATH =
+# The PLANTUMLFILE_DIRS tag can be used to specify one or more directories that
+# contain PlantUml files that are included in the documentation (see the
+# \plantumlfile command).
+
+PLANTUMLFILE_DIRS =
+
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
+# larger than this value, Doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that if the number of direct
# children of the root node in a graph is already larger than
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
@@ -2661,18 +2938,6 @@ DOT_GRAPH_MAX_NODES = 50
MAX_DOT_GRAPH_DEPTH = 0
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT = NO
-
# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
# files in one run (i.e. multiple -o and -T options on the command line). This
# makes dot run faster, but since only newer versions of dot (>1.8.10) support
@@ -2682,15 +2947,17 @@ DOT_TRANSPARENT = NO
DOT_MULTI_TARGETS = NO
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# If the GENERATE_LEGEND tag is set to YES Doxygen will generate a legend page
# explaining the meaning of the various boxes and arrows in the dot generated
# graphs.
+# Note: This tag requires that UML_LOOK isn't set, i.e. the Doxygen internal
+# graphical representation for inheritance and collaboration diagrams is used.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
GENERATE_LEGEND = YES
-# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
+# If the DOT_CLEANUP tag is set to YES, Doxygen will remove the intermediate
# files that are used to generate the various graphs.
#
# Note: This setting is not only used for dot files but also for msc temporary
@@ -2698,3 +2965,19 @@ GENERATE_LEGEND = YES
# The default value is: YES.
DOT_CLEANUP = YES
+
+# You can define message sequence charts within Doxygen comments using the \msc
+# command. If the MSCGEN_TOOL tag is left empty (the default), then Doxygen will
+# use a built-in version of mscgen tool to produce the charts. Alternatively,
+# the MSCGEN_TOOL tag can also specify the name an external tool. For instance,
+# specifying prog as the value, Doxygen will call the tool as prog -T
+# -o . The external tool should support
+# output file formats "png", "eps", "svg", and "ismap".
+
+MSCGEN_TOOL =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS =
diff --git a/DoxyGen/check_links.sh b/DoxyGen/check_links.sh
index a8f2bee..f475e7c 100755
--- a/DoxyGen/check_links.sh
+++ b/DoxyGen/check_links.sh
@@ -3,7 +3,7 @@
set -o pipefail
DIRNAME=$(dirname $(realpath $0))
-REQUIRED_GEN_PACK_LIB="0.2.2"
+REQUIRED_GEN_PACK_LIB="0.11.3"
############ gen-pack library ###########
diff --git a/DoxyGen/gen_doc.sh b/DoxyGen/gen_doc.sh
index dfc7896..8e5e5e4 100755
--- a/DoxyGen/gen_doc.sh
+++ b/DoxyGen/gen_doc.sh
@@ -5,7 +5,7 @@
#
# Pre-requisites:
# - bash shell (for Windows: install git for Windows)
-# - doxygen 1.9.2
+# - doxygen 1.13.2
# - git
# - gh cli
@@ -13,8 +13,8 @@ set -o pipefail
DIRNAME=$(dirname $(realpath $0))
DOXYGEN=$(which doxygen)
-REQ_DXY_VERSION="1.9.2"
-REQUIRED_GEN_PACK_LIB="0.2.2"
+REQ_DXY_VERSION="1.13.2"
+REQUIRED_GEN_PACK_LIB="0.11.3"
############ gen-pack library ###########
diff --git a/gen_pack.sh b/gen_pack.sh
index 8af14a5..b41869e 100755
--- a/gen_pack.sh
+++ b/gen_pack.sh
@@ -7,7 +7,7 @@
set -o pipefail
# Set version of gen pack library
-REQUIRED_GEN_PACK_LIB="0.2.2"
+REQUIRED_GEN_PACK_LIB="0.11.3"
# Set default command line arguments
DEFAULT_ARGS=(-c "")