BlueSCSI Toolbox #311
Description
BlueSCSI v2 (Pico2) with Wi-Fi is connected to ATTO SiliconExpress IV on Quadra 950 with an UltraSCSI cable via a 68-pin - > 50-pin adapter.
BlueSCSI Toolbox applications cannot find BlueSCSI (v1.0.2 or 1.1.0b1), giving an error that the device is not found.
Debuglog.txt does not contain useful information, even after starting the debug application
In Main!
SCSISelect - id: 6 err: 2
SCSISelect - id: 5 err: 2
SCSISelect - id: 4 err: 2
SCSISelect - id: 2 err: 2
SCSISelect - id: 1 err: 2
SCSISelect - id: 0 err: 2
Wi-Fi doesn't work too.
I will also attach the BlueSCSI log with the debug enabled.
log.txt
Without changing anything, I decided to connect another BlueSCSI v2 DB25.
Wi-Fi worked right away.
SD Transfer v1.0.2 started, showed a window and immediately fell into a MacsBug error, to save it I used "stdlog all"
SD Transfer v1.1.0b1 seems to work fine, but shows an extended directory only from DB25.
CD Changer didn't start anywhere, because it can't find BS.
Then I connected BSv2 with a 50-pin cable, the situation has not changed: Toolbox and Wifi do not work.
Is it a bug?