Enclosure Design #7
Description
The Hammond 1455D602BK enclosure is affordable and a good form factor for this. Small enough to be portable and proportionate to a noise source, but large enough to not wildly get pulled around by a cable.
The PCB outline is 39x60mm. 4mm of clearence is needed on either side of the long edges.
The top and bottom have very slightly recessed panels that would fit a 54x32.5mm sticker or design.
The front and rear panels are 1mm thick aluminum. The black coating is resiliant but can be laser etched. Since both faceplates will need cutouts there's also the option of engraving text on them.