Hidden tests - @fabi9163 #1

mak-gitdev · 2023-12-01T19:31:32Z

mak-gitdev
Dec 1, 2023
Maintainer

~~Hi @schlegel,~~

~~Could you please join me here ?~~

mak-gitdev · 2023-12-03T01:00:05Z

mak-gitdev
Dec 3, 2023
Maintainer Author

Hi @fabi9163,

Could you join me here as well ?

3 replies

fabi9163 Dec 3, 2023

Of course I want to help/test. Is this a fork of the official repo für hidden tests? Should we install it on top of the actual version as described in the readme?

mak-gitdev Dec 3, 2023
Maintainer Author

@fabi9163,

Yes this is for "hidden" tests 😉

You can see that as a preview of the next release which will add support for Eltako.
You can install it aside the current version but you should stop the current version and use this one instead.

The configuration is the same, you can reuse the same settings.
You also don't have to use a custom EEP file for A5-3F-7F, it is already available.

Once this new addon is installed and started, tell me so we can proceed to further tests.
Do not hesitate if you have questions or errors.

mak-gitdev Dec 4, 2023
Maintainer Author

Hi @fabi9163,

I updated the enoceanmqtt.devices.sample file with an example of how to add your FSB14 in the device file.

fabi9163 · 2023-12-04T10:10:47Z

fabi9163
Dec 4, 2023

Hi @mak-gitdev,

I've installed the Test-Addon and added your enoceanmqtt.devices.sample as device-file, enabled debugging, mapped on my ID and restarted. Then I pressed the switch (switch ID is FEE2011F):

actual state cover: "opened", status "gestoppt"
pressed up (status "öffnet" and waited until every event passed threw (It's timing based in wibutler, set to 16,5 seconds). Althought I pressed up which it is already, it's running in state "öffnet" for ~30 seconds and then switching to "gestoppt" again). Log as follows:

2023-12-04 11:03:20,067 DEBUG: Sending PUBLISH (d0, q0, r1, m322), 'b'enoceanmqtt/my_fsb14/f6'', ... (139 bytes)
2023-12-04 11:03:50,278 DEBUG: FF:83:EB:8E->FF:FF:FF:FF (-68 dBm): 0x01 ['0xf6', '0x70', '0xff', '0x83', '0xeb', '0x8e', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x44', '0x0'] OrderedDict()
2023-12-04 11:03:50,279 DEBUG: enoceanmqtt/my_fsb14/f6: R1 (Rocker 1st action)=Button BO 
2023-12-04 11:03:50,279 DEBUG: enoceanmqtt/my_fsb14/f6: EB (Energy bow)=pressed 
2023-12-04 11:03:50,279 DEBUG: enoceanmqtt/my_fsb14/f6: R2 (Rocker 2nd action)=Button AI 
2023-12-04 11:03:50,279 DEBUG: enoceanmqtt/my_fsb14/f6: SA (2nd action)=No 2nd action 
2023-12-04 11:03:50,279 DEBUG: enoceanmqtt/my_fsb14/f6: T21 (T21)=True 
2023-12-04 11:03:50,279 DEBUG: enoceanmqtt/my_fsb14/f6: NU (NU)=True 
2023-12-04 11:03:50,279 DEBUG: enoceanmqtt/my_fsb14/f6: Sent MQTT: {"_RSSI_": -68, "_DATE_": "2023-12-04T11:03:50.278611", "_RAW_DATA_": "70:30", "R1": 3, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2023-12-04 11:03:50,279 DEBUG: Sending PUBLISH (d0, q0, r1, m323), 'b'enoceanmqtt/my_fsb14/f6'', ... (139 bytes)

pressed down (status "Schließt" and waited until every event passed threw. Logs:

2023-12-04 11:08:18,305 INFO: unknown sensor: FE:E2:01:1F (RORG = 0xf6)
2023-12-04 11:08:18,560 DEBUG: FE:E2:01:1F->FF:FF:FF:FF (-88 dBm): 0x01 ['0xf6', '0x0', '0xfe', '0xe2', '0x1', '0x1f', '0x20'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x58', '0x0'] OrderedDict()
2023-12-04 11:08:18,562 INFO: unknown sensor: FE:E2:01:1F (RORG = 0xf6)
2023-12-04 11:08:19,536 DEBUG: FF:83:EB:8E->FF:FF:FF:FF (-68 dBm): 0x01 ['0xf6', '0x2', '0xff', '0x83', '0xeb', '0x8e', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x44', '0x0'] OrderedDict()
2023-12-04 11:08:19,537 DEBUG: enoceanmqtt/my_fsb14/f6: R1 (Rocker 1st action)=Button AI 
2023-12-04 11:08:19,538 DEBUG: enoceanmqtt/my_fsb14/f6: EB (Energy bow)=released 
2023-12-04 11:08:19,538 DEBUG: enoceanmqtt/my_fsb14/f6: R2 (Rocker 2nd action)=Button AO 
2023-12-04 11:08:19,538 DEBUG: enoceanmqtt/my_fsb14/f6: SA (2nd action)=No 2nd action 
2023-12-04 11:08:19,539 DEBUG: enoceanmqtt/my_fsb14/f6: T21 (T21)=True 
2023-12-04 11:08:19,539 DEBUG: enoceanmqtt/my_fsb14/f6: NU (NU)=True 
2023-12-04 11:08:19,539 DEBUG: enoceanmqtt/my_fsb14/f6: Sent MQTT: {"_RSSI_": -68, "_DATE_": "2023-12-04T11:08:19.535949", "_RAW_DATA_": "02:30", "R1": 0, "EB": 0, "R2": 1, "SA": 0, "T21": true, "NU": true}
2023-12-04 11:08:19,539 DEBUG: Sending PUBLISH (d0, q0, r1, m326), 'b'enoceanmqtt/my_fsb14/f6'', ... (139 bytes)
2023-12-04 11:08:49,736 DEBUG: FF:83:EB:8E->FF:FF:FF:FF (-68 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x83', '0xeb', '0x8e', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x44', '0x0'] OrderedDict()
2023-12-04 11:08:49,739 DEBUG: enoceanmqtt/my_fsb14/f6: R1 (Rocker 1st action)=Button BI 
2023-12-04 11:08:49,740 DEBUG: enoceanmqtt/my_fsb14/f6: EB (Energy bow)=pressed 
2023-12-04 11:08:49,741 DEBUG: enoceanmqtt/my_fsb14/f6: R2 (Rocker 2nd action)=Button AI 
2023-12-04 11:08:49,742 DEBUG: enoceanmqtt/my_fsb14/f6: SA (2nd action)=No 2nd action 
2023-12-04 11:08:49,743 DEBUG: enoceanmqtt/my_fsb14/f6: T21 (T21)=True 
2023-12-04 11:08:49,744 DEBUG: enoceanmqtt/my_fsb14/f6: NU (NU)=True 
2023-12-04 11:08:49,745 DEBUG: enoceanmqtt/my_fsb14/f6: Sent MQTT: {"_RSSI_": -68, "_DATE_": "2023-12-04T11:08:49.736056", "_RAW_DATA_": "50:30", "R1": 2, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2023-12-04 11:08:49,745 DEBUG: Sending PUBLISH (d0, q0, r1, m327), 'b'enoceanmqtt/my_fsb14/f6'', ... (139 bytes)

Please tell me what tests and logfiles you need!

PS. Why is there no "a5" telegram, is there something missing?

38 replies

mak-gitdev Dec 6, 2023
Maintainer Author

~~I will also start a new discussion for the pairing procedures.~~
~~So you could simply copy-paste your tutorial to that discussion.~~

~~Is it OK for you ?~~

mak-gitdev Dec 6, 2023
Maintainer Author

I wrote the previous message before seeing your message.

Will add my devices, yes. Should I copy the lean-steps also or only the list of working devices?

Yes this is better I think, so all data available at the same location. 👍

fabi9163 Dec 6, 2023

hehe, made a suggestion. Feel free to optimize/change or give feedback

mak-gitdev Dec 6, 2023
Maintainer Author

Perfect ! Thanks a lot

mak-gitdev Dec 7, 2023
Maintainer Author

Hi @fabi9163,

By tonight, I will push 0.0.5 which will add the mapping above (FHD60SB, FSB14, FSB61, FSR61, FSR14).
May be a cover entity as well but without position control for the moment.
Then I will let new users make tests as well so we can make sure the solution is robust enough 👍

fabi9163 · 2023-12-07T21:13:44Z

fabi9163
Dec 7, 2023

I've updated to 0.0.5 and removed my own mapping-file. Seems weather the light nor the cover is working. Do I have to pair again?

5 replies

mak-gitdev Dec 7, 2023
Maintainer Author

Hi @fabi9163,

Sorry I just saw your message.
This is for sure due to the problem I previously described regarding "garbage" entities.
Didn't have time to fix it in 0.0.5, sorry.

No need to pair again. Need only to clean your device database.
For that:

Stop the addon
Remove (or comment out) all your devices from the device file.
Start the addon. This will remove all known devices from HA.
Reload the MQTT integration. This should remove all remaining "garbage" entities.
Stop the addon again.
Add back (or uncomment) your devices to the device file.
Start the addon.
Everything should be ok now.

If not, then use your custom mapping file. That will fix it for sure.

fabi9163 Dec 11, 2023

Hi,
updated to 0.0.6 and tried to cleanup like you told. After start the addon with empty device-file the cover-entity still persisted in mqtt-device, I manually removed it via the "3 dots menü" on detailpage like you told some time ago and readded everything.

PS: You told at first there will only be a up/down cover. But it seems also the percentage is available and looks good on some first tests, hehe👌

Hope I will find some more time for declare all the other covers and some tests.

mak-gitdev Dec 11, 2023
Maintainer Author

Hi @fabi9163,

Yes I had time this weekend to play a bit with my FSB61 and check that the cover entity was ok.
My FSB61 has no cover attached so glad to have confirmation that the cover entity looks ok in a working setup as well.

Regarding the issue with entities, normally it has been fixed.
Please let me know if you have this issue again.

fabi9163 Dec 18, 2023

Hi @mak-gitdev,
got time to move the "old" light config with the new one, removed the template-entries and adding the missing covers. After cleanup the old devices like you told

Stop the addon

Remove (or comment out) all your devices from the device file.

Start the addon. This will remove all known devices from HA.

Reload the MQTT integration. This should remove all remaining "garbage" entities.

Stop the addon again.

Add back (or uncomment) your devices to the device file.

Start the addon.

Everything should be ok now.

the mqtt-devices list is empty. After adding everything back two devices seems to be in the "old" mode, see

(version 0.0.10)

Any idea?

fabi9163 Dec 18, 2023

There also seems to be a major bug in Pairing:
If I pair more than one cover, all single paired aktors work parallel.
E.g. I press coverA->cover a+b+c+... closing.

In the eltako-PC-software the pairing-entry of each seperate entry have the same ID, for me its: FF826380 which is the MQTT-device ID.

Maybe this is correct. But then, how does the eltako device knows when it's called and when not? Seems that now every device I paired acts on all telegrams

More research:
The already working "wibutler" entries in eltako-software seems also to have two seperate IDs for each channel, see

mak-gitdev · 2023-12-18T13:11:46Z

mak-gitdev
Dec 18, 2023
Maintainer Author

Hi @fabi9163,

Regarding your second message.
An EnOcean telegram contains 2 IDs, the sender ID (the ID of the device sending the telegram) and the destination ID (the ID of the device the sender wants to reach). Note that 0xFFFFFFFF is the broadcast ID.

As you may have noticed, I just started my journey with Eltako devices.
But from what I observed with all the other manufacturers' devices I've dealt with, for an actuator to interpret an incoming telegram, both following conditions must be met:

The destination ID matches the ID of the actuator
The sender ID is already paired with the actuator

So I thought this was the same for Eltako as well.
But strangely for me, it seems that they don't check condition 1.
This has been reported by another user as well so it tends to confirm that.
I asked the question to the Eltako technical support to check if there is a special configuration needed during pairing.
I hope to have a reply soon.

Anyway, no problem at all, you can add a specific sender ID per device like below:

[myFsb14NameChannel1]
address = 0xFF83XXXX # Id of the Actor itself which is set from the FAM14 during initialisation. You have to calculate it or search for the answer-telegram in the protocoll-tab in the addon after pressed the already working hardware-switch
model = eltako/FSB14
sender = 0xFFYYYYYY # Your USB300 Base ID + offset. Offset is in the range [0:127] so you have 128 possible sender ID.

To know you USB300 Base ID, have a look at this page.
As each EnOcean transceiver has 128 possible "sender ID", offset should be in the range 0 to 127.
For example, as you said your USB300 Base ID is 0xFF826380 and if you want to use offset 8 to control one of your device, then:

sender = 0xFF826388

You will unfortunately have to do the pairing again. Sorry for that.

9 replies

fabi9163 Dec 18, 2023

Nevermind my last comments, seems I have to switch every toggle one time to change it's style to a toggle

mak-gitdev Dec 18, 2023
Maintainer Author

@fabi9163,

Thanks for the feedback.
As it stands, are there still unsolved issues ?

fabi9163 Dec 18, 2023

No Problem and thanks for asking. Last TODO for me is to get the FSR61 working. Paired it and the switch is already working. But the virtual toggle is switching back -> the feedbackloop is somhow broken until now. But last time with virtual-switches the problem was the same and could be solved by another pairing-process...not figured out what exactly causes the problem
I will report my results later

fabi9163 Dec 18, 2023

No, it's not working...
Configuration

#treppenhaus
[light/treppenhaus]
address = 0x04260161
sender  = 0xFF82638F
model = eltako/FSR61

Paired it in Mode "40" aka "Direction Key/Switch" and enabled acknowledgment-telegrams.

Legend:
FE:DD:20:80 -> Manual Rocker
04:26:01:61 -> ID of the FSR61
FF:82:63:8F -> ID of the usb300 + unique offset

This is the result I get in Logs if I press a manual Rocker

2023-12-18 16:49:33,147 DEBUG: FE:DD:20:80->FF:FF:FF:FF (-92 dBm): 0x01 ['0xf6', '0x30', '0xfe', '0xdd', '0x20', '0x80', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x5c', '0x0'] OrderedDict()
2023-12-18 16:49:33,350 DEBUG: 04:26:01:61->FF:FF:FF:FF (-85 dBm): 0x01 ['0xf6', '0x70', '0x4', '0x26', '0x1', '0x61', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x55', '0x0'] OrderedDict()
2023-12-18 16:49:33,451 DEBUG: FE:DD:20:80->FF:FF:FF:FF (-92 dBm): 0x01 ['0xf6', '0x0', '0xfe', '0xdd', '0x20', '0x80', '0x20'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x5c', '0x0'] OrderedDict()

And the logs if I press the Switch in HA:

2023-12-18 17:00:05,049 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/light/treppenhaus/a5/req', ...  (50 bytes)
2023-12-18 17:00:05,049 DEBUG: Got MQTT message: enoceanmqtt/light/treppenhaus/a5/req
2023-12-18 17:00:05,049 DEBUG: Send Payload: clear+raw_data
2023-12-18 17:00:05,050 DEBUG: enoceanmqtt/light/treppenhaus/a5: req={}
2023-12-18 17:00:05,050 DEBUG: Trigger message to: enoceanmqtt/light/treppenhaus/a5
2023-12-18 17:00:05,050 DEBUG: sensor data: 01:00:00:09
2023-12-18 17:00:05,050 INFO: sending: FF:82:63:8F->04:26:01:61 (-255 dBm): 0x01 ['0xa5', '0x1', '0x0', '0x0', '0x9', '0xff', '0x82', '0x63', '0x8f', '0x0'] ['0x3', '0x4', '0x26', '0x1', '0x61', '0xff', '0x0'] OrderedDict([('COM', {'description': 'Command ID', 'unit': '', 'value': 'Command ID 0', 'raw_value': 0}), ('TIM', {'description': 'Time in 1/10 seconds. 0 = no time specifed', 'unit': 's', 'value': 1.3877787807814457e-17, 'raw_value': 0}), ('LCK', {'description': 'Lock for duration time if time >0, unlimited time of no time specified. Locking may be cleared with "unlock". During lock phase no other commands will be accepted or executed', 'unit': '', 'value': 'Unlock', 'raw_value': 0}), ('DEL', {'description': 'Delay or duration (if Time > 0); 0 = Duration (Execute switching command immediately and switch back after duration) 1 = Delay (Execute switching command after delay)', 'unit': '', 'value': 'Duration', 'raw_value': 0}), ('SW', {'description': 'Switching command ON/OFF', 'unit': '', 'value': 'Off', 'raw_value': 0})])
2023-12-18 17:00:05,050 DEBUG: Clearing data buffer.
2023-12-18 17:00:05,079 INFO: Sending packet
2023-12-18 17:00:05,079 DEBUG: FF:82:63:8F->04:26:01:61 (-255 dBm): 0x01 ['0xa5', '0x1', '0x0', '0x0', '0x9', '0xff', '0x82', '0x63', '0x8f', '0x0'] ['0x3', '0x4', '0x26', '0x1', '0x61', '0xff', '0x0'] OrderedDict([('COM', {'description': 'Command ID', 'unit': '', 'value': 'Command ID 0', 'raw_value': 0}), ('TIM', {'description': 'Time in 1/10 seconds. 0 = no time specifed', 'unit': 's', 'value': 1.3877787807814457e-17, 'raw_value': 0}), ('LCK', {'description': 'Lock for duration time if time >0, unlimited time of no time specified. Locking may be cleared with "unlock". During lock phase no other commands will be accepted or executed', 'unit': '', 'value': 'Unlock', 'raw_value': 0}), ('DEL', {'description': 'Delay or duration (if Time > 0); 0 = Duration (Execute switching command immediately and switch back after duration) 1 = Delay (Execute switching command after delay)', 'unit': '', 'value': 'Duration', 'raw_value': 0}), ('SW', {'description': 'Switching command ON/OFF', 'unit': '', 'value': 'Off', 'raw_value': 0})])
2023-12-18 17:00:05,179 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2023-12-18 17:00:05,401 DEBUG: 04:26:01:61->FF:FF:FF:FF (-85 dBm): 0x01 ['0xf6', '0x70', '0x4', '0x26', '0x1', '0x61', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x55', '0x0'] OrderedDict()

@mak-gitdev are the acknowledgment-telegrams from 04:26:01:61 correct?

fabi9163 Dec 18, 2023

Realized the problem is bigger, also states of the FSR14 aktors is not working correcly, will add some logs soon

fabi9163 · 2023-12-18T16:15:52Z

fabi9163
Dec 18, 2023

Configuration

[light/zimmerfabi]
model = eltako/FSR14
address = 0xFF83EB91
sender  = 0xFF826382

Legend:
FE:E2:01:1F -> Manual Rocker
FF:83:EB:91 -> ID of the FSR14 aktor
FF:82:63:82 -> ID of the usb300 + unique offset

Actual State:

light is off
HA showing light off

triggering Manual Rocker

2023-12-18 17:15:02,458 DEBUG: FE:E2:01:1F->FF:FF:FF:FF (-70 dBm): 0x01 ['0xf6', '0x30', '0xfe', '0xe2', '0x1', '0x1f', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x46', '0x0'] OrderedDict()
2023-12-18 17:15:02,586 DEBUG: FE:E2:01:1F->FF:FF:FF:FF (-70 dBm): 0x01 ['0xf6', '0x0', '0xfe', '0xe2', '0x1', '0x1f', '0x20'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x46', '0x0'] OrderedDict()
2023-12-18 17:15:02,988 DEBUG: FF:83:EB:91->FF:FF:FF:FF (-74 dBm): 0x01 ['0xf6', '0x70', '0xff', '0x83', '0xeb', '0x91', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x4a', '0x0'] OrderedDict()

Light is on
HA showing light off <-WRONG

triggering HA-Switch

2023-12-18 17:16:53,618 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/light/zimmerfabi/a5/req', ...  (50 bytes)
2023-12-18 17:16:53,618 DEBUG: Got MQTT message: enoceanmqtt/light/zimmerfabi/a5/req
2023-12-18 17:16:53,618 DEBUG: Send Payload: clear+raw_data
2023-12-18 17:16:53,618 DEBUG: enoceanmqtt/light/zimmerfabi/a5: req={}
2023-12-18 17:16:53,618 DEBUG: Trigger message to: enoceanmqtt/light/zimmerfabi/a5
2023-12-18 17:16:53,619 DEBUG: sensor data: 01:00:00:09
2023-12-18 17:16:53,619 INFO: sending: FF:82:63:82->FF:83:EB:91 (-255 dBm): 0x01 ['0xa5', '0x1', '0x0', '0x0', '0x9', '0xff', '0x82', '0x63', '0x82', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x91', '0xff', '0x0'] OrderedDict([('COM', {'description': 'Command ID', 'unit': '', 'value': 'Command ID 0', 'raw_value': 0}), ('TIM', {'description': 'Time in 1/10 seconds. 0 = no time specifed', 'unit': 's', 'value': 1.3877787807814457e-17, 'raw_value': 0}), ('LCK', {'description': 'Lock for duration time if time >0, unlimited time of no time specified. Locking may be cleared with "unlock". During lock phase no other commands will be accepted or executed', 'unit': '', 'value': 'Unlock', 'raw_value': 0}), ('DEL', {'description': 'Delay or duration (if Time > 0); 0 = Duration (Execute switching command immediately and switch back after duration) 1 = Delay (Execute switching command after delay)', 'unit': '', 'value': 'Duration', 'raw_value': 0}), ('SW', {'description': 'Switching command ON/OFF', 'unit': '', 'value': 'Off', 'raw_value': 0})])
2023-12-18 17:16:53,619 DEBUG: Clearing data buffer.
2023-12-18 17:16:53,631 INFO: Sending packet
2023-12-18 17:16:53,631 DEBUG: FF:82:63:82->FF:83:EB:91 (-255 dBm): 0x01 ['0xa5', '0x1', '0x0', '0x0', '0x9', '0xff', '0x82', '0x63', '0x82', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x91', '0xff', '0x0'] OrderedDict([('COM', {'description': 'Command ID', 'unit': '', 'value': 'Command ID 0', 'raw_value': 0}), ('TIM', {'description': 'Time in 1/10 seconds. 0 = no time specifed', 'unit': 's', 'value': 1.3877787807814457e-17, 'raw_value': 0}), ('LCK', {'description': 'Lock for duration time if time >0, unlimited time of no time specified. Locking may be cleared with "unlock". During lock phase no other commands will be accepted or executed', 'unit': '', 'value': 'Unlock', 'raw_value': 0}), ('DEL', {'description': 'Delay or duration (if Time > 0); 0 = Duration (Execute switching command immediately and switch back after duration) 1 = Delay (Execute switching command after delay)', 'unit': '', 'value': 'Duration', 'raw_value': 0}), ('SW', {'description': 'Switching command ON/OFF', 'unit': '', 'value': 'Off', 'raw_value': 0})])
2023-12-18 17:16:53,732 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2023-12-18 17:16:54,317 DEBUG: FF:83:EB:91->FF:FF:FF:FF (-74 dBm): 0x01 ['0xf6', '0x70', '0xff', '0x83', '0xeb', '0x91', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x4a', '0x0'] OrderedDict()

Light still on
HA-Toggle switches off after ~1 sec

9 replies

fabi9163 Jan 18, 2024

Hi,
the previous pairing problems seems to be gone.

After finding time to create some automations to controll all shutters I'm getting some strange behaviour:

Automations for sunrise/sunset:

alias: Sonnenaufgang Rollos öffnen
description: ""
trigger:
  - platform: sun
    event: sunrise
    offset: 0
condition:
  - condition: or
    conditions:
      - condition: state
        entity_id: input_boolean.gastemodus
        state: "off"
action:
  - service: cover.set_cover_position
    metadata: {}
    data:
      position: 5
    target:
      entity_id:
        - cover.e2m_cover_bad_cover
        - cover.e2m_cover_schlafzimmer_cover
        - cover.e2m_cover_wc_cover
  - service: cover.open_cover
    metadata: {}
    data: {}
    target:
      entity_id:
        - cover.e2m_cover_esszimmer_cover
        - cover.e2m_cover_kuechegarten_cover
        - cover.e2m_cover_kuechelinks_cover
        - cover.e2m_cover_wohnzimmerbalkon_cover
        - cover.e2m_cover_wohnzimmerrechts_cover
        - cover.e2m_cover_zimmerfabi_cover
        - cover.e2m_cover_zimmersarah_cover
mode: single


alias: Sonnenuntergang Rollos schließen
description: ""
trigger:
  - platform: sun
    event: sunset
    offset: 0
condition: []
action:
  - parallel:
      - service: cover.close_cover
        target:
          entity_id:
            - cover.e2m_cover_esszimmer_cover
            - cover.e2m_cover_kuechegarten_cover
            - cover.e2m_cover_kuechelinks_cover
            - cover.e2m_cover_wohnzimmerbalkon_cover
            - cover.e2m_cover_wohnzimmerrechts_cover
            - cover.e2m_cover_zimmerfabi_cover
            - cover.e2m_cover_zimmersarah_cover
            - cover.e2m_cover_bad_cover
            - cover.e2m_cover_wc_cover
            - cover.e2m_cover_schlafzimmer_cover
        data: {}
mode: single

Problem:

The state of the screenshot was after triggering sunrise -> every cover should be partially or fully opened. But only some shutters were triggered.
If I use the manual buttons everything seems to work.

Is this problem related to the cover entity? Or do I need to trigger the service one after the other to avoid parallel overlapping of the wireless signals?

(Info: I'm running still version 0.0.10)

mak-gitdev Jan 18, 2024
Maintainer Author

Hi @fabi9163,

Not sure this is related to the cover entity as you are able to control them manually.

If possible, it would be interesting to have a log when sunrise or sunset is triggered.
I would like to investigate whether there is a performance issue in handling "simultaneously" multiple requests.

Anyway, I think your proposed solution should work with as low as a 1 second delay between each service call.

fabi9163 Jan 18, 2024

Thanks for the quick answer,
here is a full log of the process:

initial positions: closed everywhere

Trigger "open"/sunrise on ~11:43:20

2024-01-18 11:43:23,332 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/wc/a5/req', ...  (58 bytes)
2024-01-18 11:43:23,333 DEBUG: Got MQTT message: enoceanmqtt/cover/wc/a5/req
2024-01-18 11:43:23,333 DEBUG: Send Payload: clear
2024-01-18 11:43:23,333 DEBUG: enoceanmqtt/cover/wc/a5: req={'DB3': 0, 'DB2': 17, 'DB1': 1, 'DB0': 10}
2024-01-18 11:43:23,333 DEBUG: Trigger message to: enoceanmqtt/cover/wc/a5
2024-01-18 11:43:23,333 DEBUG: sensor data: {'DB3': 0, 'DB2': 17, 'DB1': 1, 'DB0': 10}
2024-01-18 11:43:23,334 INFO: sending: FF:82:63:97->FF:83:EB:8C (-255 dBm): 0x01 ['0xa5', '0x0', '0x11', '0x1', '0xa', '0xff', '0x82', '0x63', '0x97', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8c', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 17.0, 'raw_value': 17}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:43:23,335 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,347 INFO: Sending packet
2024-01-18 11:43:23,347 DEBUG: FF:82:63:97->FF:83:EB:8C (-255 dBm): 0x01 ['0xa5', '0x0', '0x11', '0x1', '0xa', '0xff', '0x82', '0x63', '0x97', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8c', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 17.0, 'raw_value': 17}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:43:23,375 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/bad/a5/req', ...  (58 bytes)
2024-01-18 11:43:23,377 DEBUG: Got MQTT message: enoceanmqtt/cover/bad/a5/req
2024-01-18 11:43:23,378 DEBUG: Send Payload: clear
2024-01-18 11:43:23,379 DEBUG: enoceanmqtt/cover/bad/a5: req={'DB3': 0, 'DB2': 13, 'DB1': 1, 'DB0': 10}
2024-01-18 11:43:23,380 DEBUG: Trigger message to: enoceanmqtt/cover/bad/a5
2024-01-18 11:43:23,384 DEBUG: sensor data: {'DB3': 0, 'DB2': 13, 'DB1': 1, 'DB0': 10}
2024-01-18 11:43:23,396 INFO: sending: FF:82:63:91->FF:83:EB:82 (-255 dBm): 0x01 ['0xa5', '0x0', '0xd', '0x1', '0xa', '0xff', '0x82', '0x63', '0x91', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x82', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 13.0, 'raw_value': 13}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:43:23,399 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,400 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/schlafzimmer/a5/req', ...  (58 bytes)
2024-01-18 11:43:23,400 DEBUG: Got MQTT message: enoceanmqtt/cover/schlafzimmer/a5/req
2024-01-18 11:43:23,401 DEBUG: Send Payload: clear
2024-01-18 11:43:23,401 DEBUG: enoceanmqtt/cover/schlafzimmer/a5: req={'DB3': 0, 'DB2': 12, 'DB1': 1, 'DB0': 10}
2024-01-18 11:43:23,401 DEBUG: Trigger message to: enoceanmqtt/cover/schlafzimmer/a5
2024-01-18 11:43:23,401 DEBUG: sensor data: {'DB3': 0, 'DB2': 12, 'DB1': 1, 'DB0': 10}
2024-01-18 11:43:23,402 INFO: sending: FF:82:63:90->FF:83:EB:81 (-255 dBm): 0x01 ['0xa5', '0x0', '0xc', '0x1', '0xa', '0xff', '0x82', '0x63', '0x90', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x81', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 12.0, 'raw_value': 12}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:43:23,402 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,403 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/zimmerfabi/a5/req', ...  (56 bytes)
2024-01-18 11:43:23,403 DEBUG: Got MQTT message: enoceanmqtt/cover/zimmerfabi/a5/req
2024-01-18 11:43:23,403 DEBUG: Send Payload: clear
2024-01-18 11:43:23,403 DEBUG: enoceanmqtt/cover/zimmerfabi/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,403 DEBUG: Trigger message to: enoceanmqtt/cover/zimmerfabi/a5
2024-01-18 11:43:23,403 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,405 INFO: sending: FF:82:63:99->FF:83:EB:8E (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x99', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8e', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,405 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,407 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/kuechelinks/a5/req', ...  (56 bytes)
2024-01-18 11:43:23,408 DEBUG: Got MQTT message: enoceanmqtt/cover/kuechelinks/a5/req
2024-01-18 11:43:23,410 DEBUG: Send Payload: clear
2024-01-18 11:43:23,413 DEBUG: enoceanmqtt/cover/kuechelinks/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,413 DEBUG: Trigger message to: enoceanmqtt/cover/kuechelinks/a5
2024-01-18 11:43:23,414 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,415 INFO: sending: FF:82:63:95->FF:83:EB:8A (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x95', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8a', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,415 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,416 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/zimmersarah/a5/req', ...  (56 bytes)
2024-01-18 11:43:23,416 DEBUG: Got MQTT message: enoceanmqtt/cover/zimmersarah/a5/req
2024-01-18 11:43:23,416 DEBUG: Send Payload: clear
2024-01-18 11:43:23,416 DEBUG: enoceanmqtt/cover/zimmersarah/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,416 DEBUG: Trigger message to: enoceanmqtt/cover/zimmersarah/a5
2024-01-18 11:43:23,417 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,418 INFO: sending: FF:82:63:98->FF:83:EB:8D (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x98', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8d', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,418 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,418 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/kuechegarten/a5/req', ...  (56 bytes)
2024-01-18 11:43:23,418 DEBUG: Got MQTT message: enoceanmqtt/cover/kuechegarten/a5/req
2024-01-18 11:43:23,419 DEBUG: Send Payload: clear
2024-01-18 11:43:23,419 DEBUG: enoceanmqtt/cover/kuechegarten/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,419 DEBUG: Trigger message to: enoceanmqtt/cover/kuechegarten/a5
2024-01-18 11:43:23,419 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,420 INFO: sending: FF:82:63:93->FF:83:EB:84 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x93', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x84', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,421 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,421 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/esszimmer/a5/req', ...  (56 bytes)
2024-01-18 11:43:23,421 DEBUG: Got MQTT message: enoceanmqtt/cover/esszimmer/a5/req
2024-01-18 11:43:23,421 DEBUG: Send Payload: clear
2024-01-18 11:43:23,421 DEBUG: enoceanmqtt/cover/esszimmer/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,421 DEBUG: Trigger message to: enoceanmqtt/cover/esszimmer/a5
2024-01-18 11:43:23,422 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,423 INFO: sending: FF:82:63:96->FF:83:EB:8B (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x96', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8b', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,423 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,423 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/wohnzimmerrechts/a5/req', ...  (56 bytes)
2024-01-18 11:43:23,423 DEBUG: Got MQTT message: enoceanmqtt/cover/wohnzimmerrechts/a5/req
2024-01-18 11:43:23,424 DEBUG: Send Payload: clear
2024-01-18 11:43:23,424 DEBUG: enoceanmqtt/cover/wohnzimmerrechts/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,424 DEBUG: Trigger message to: enoceanmqtt/cover/wohnzimmerrechts/a5
2024-01-18 11:43:23,425 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,426 INFO: sending: FF:82:63:94->FF:83:EB:89 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x94', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x89', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,426 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,426 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/wohnzimmerbalkon/a5/req', ...  (56 bytes)
2024-01-18 11:43:23,426 DEBUG: Got MQTT message: enoceanmqtt/cover/wohnzimmerbalkon/a5/req
2024-01-18 11:43:23,426 DEBUG: Send Payload: clear
2024-01-18 11:43:23,426 DEBUG: enoceanmqtt/cover/wohnzimmerbalkon/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,426 DEBUG: Trigger message to: enoceanmqtt/cover/wohnzimmerbalkon/a5
2024-01-18 11:43:23,427 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:43:23,428 INFO: sending: FF:82:63:92->FF:83:EB:83 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x92', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x83', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,429 DEBUG: Clearing data buffer.
2024-01-18 11:43:23,448 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:43:23,448 INFO: got response packet: OK
2024-01-18 11:43:23,448 INFO: Sending packet
2024-01-18 11:43:23,448 DEBUG: FF:82:63:91->FF:83:EB:82 (-255 dBm): 0x01 ['0xa5', '0x0', '0xd', '0x1', '0xa', '0xff', '0x82', '0x63', '0x91', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x82', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 13.0, 'raw_value': 13}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:43:23,448 INFO: Sending packet
2024-01-18 11:43:23,449 DEBUG: FF:82:63:90->FF:83:EB:81 (-255 dBm): 0x01 ['0xa5', '0x0', '0xc', '0x1', '0xa', '0xff', '0x82', '0x63', '0x90', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x81', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 12.0, 'raw_value': 12}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:43:23,449 INFO: Sending packet
2024-01-18 11:43:23,449 DEBUG: FF:82:63:99->FF:83:EB:8E (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x99', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8e', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,449 INFO: Sending packet
2024-01-18 11:43:23,449 DEBUG: FF:82:63:95->FF:83:EB:8A (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x95', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8a', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,449 INFO: Sending packet
2024-01-18 11:43:23,450 DEBUG: FF:82:63:98->FF:83:EB:8D (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x98', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8d', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,450 INFO: Sending packet
2024-01-18 11:43:23,450 DEBUG: FF:82:63:93->FF:83:EB:84 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x93', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x84', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,450 INFO: Sending packet
2024-01-18 11:43:23,450 DEBUG: FF:82:63:96->FF:83:EB:8B (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x96', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8b', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,450 INFO: Sending packet
2024-01-18 11:43:23,450 DEBUG: FF:82:63:94->FF:83:EB:89 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x94', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x89', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,451 INFO: Sending packet
2024-01-18 11:43:23,451 DEBUG: FF:82:63:92->FF:83:EB:83 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x92', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x83', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:43:23,478 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:43:23,478 INFO: got response packet: OK
2024-01-18 11:43:23,479 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:43:23,479 INFO: got response packet: OK
2024-01-18 11:43:23,494 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:43:23,494 INFO: got response packet: OK
2024-01-18 11:43:23,495 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:43:23,495 INFO: got response packet: OK
2024-01-18 11:43:23,706 DEBUG: FF:83:EB:8E->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x83', '0xeb', '0x8e', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button BI', 'raw_value': 2}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:43:23,707 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R1 (Rocker 1st action)=Button BI 
2024-01-18 11:43:23,707 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: EB (Energy bow)=pressed 
2024-01-18 11:43:23,708 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:43:23,708 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:43:23,708 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: T21 (T21)=True 
2024-01-18 11:43:23,708 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: NU (NU)=True 
2024-01-18 11:43:23,708 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:43:23.706941", "_RAW_DATA_": "50:30", "R1": 2, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:43:23,708 DEBUG: Sending PUBLISH (d0, q0, r1, m728), 'b'enoceanmqtt/cover/zimmerfabi/f6'', ... (139 bytes)
2024-01-18 11:43:24,474 DEBUG: FF:83:EB:82->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x82', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'released', 'raw_value': 0}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': '2nd action valid', 'raw_value': 1}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:43:24,474 DEBUG: enoceanmqtt/cover/bad/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:43:24,474 DEBUG: enoceanmqtt/cover/bad/f6: EB (Energy bow)=released 
2024-01-18 11:43:24,474 DEBUG: enoceanmqtt/cover/bad/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:43:24,474 DEBUG: enoceanmqtt/cover/bad/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:43:24,474 DEBUG: enoceanmqtt/cover/bad/f6: T21 (T21)=True 
2024-01-18 11:43:24,474 DEBUG: enoceanmqtt/cover/bad/f6: NU (NU)=True 
2024-01-18 11:43:24,475 DEBUG: enoceanmqtt/cover/bad/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:43:24.474085", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:43:24,475 DEBUG: Sending PUBLISH (d0, q0, r1, m729), 'b'enoceanmqtt/cover/bad/f6'', ... (139 bytes)
2024-01-18 11:43:24,889 DEBUG: FF:83:EB:8A->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x8a', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'released', 'raw_value': 0}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': '2nd action valid', 'raw_value': 1}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:43:24,890 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:43:24,890 DEBUG: enoceanmqtt/cover/kuechelinks/f6: EB (Energy bow)=released 
2024-01-18 11:43:24,890 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:43:24,890 DEBUG: enoceanmqtt/cover/kuechelinks/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:43:24,890 DEBUG: enoceanmqtt/cover/kuechelinks/f6: T21 (T21)=True 
2024-01-18 11:43:24,890 DEBUG: enoceanmqtt/cover/kuechelinks/f6: NU (NU)=True 
2024-01-18 11:43:24,890 DEBUG: enoceanmqtt/cover/kuechelinks/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:43:24.889696", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:43:24,890 DEBUG: Sending PUBLISH (d0, q0, r1, m730), 'b'enoceanmqtt/cover/kuechelinks/f6'', ... (139 bytes)
2024-01-18 11:43:25,001 DEBUG: FF:83:EB:8C->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x8c', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'released', 'raw_value': 0}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': '2nd action valid', 'raw_value': 1}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:43:25,001 DEBUG: enoceanmqtt/cover/wc/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:43:25,002 DEBUG: enoceanmqtt/cover/wc/f6: EB (Energy bow)=released 
2024-01-18 11:43:25,002 DEBUG: enoceanmqtt/cover/wc/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:43:25,002 DEBUG: enoceanmqtt/cover/wc/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:43:25,002 DEBUG: enoceanmqtt/cover/wc/f6: T21 (T21)=True 
2024-01-18 11:43:25,002 DEBUG: enoceanmqtt/cover/wc/f6: NU (NU)=True 
2024-01-18 11:43:25,002 DEBUG: enoceanmqtt/cover/wc/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:43:25.001613", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:43:25,002 DEBUG: Sending PUBLISH (d0, q0, r1, m731), 'b'enoceanmqtt/cover/wc/f6'', ... (139 bytes)
2024-01-18 11:43:25,145 DEBUG: FF:83:EB:8E->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x8e', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'released', 'raw_value': 0}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': '2nd action valid', 'raw_value': 1}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:43:25,145 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:43:25,146 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: EB (Energy bow)=released 
2024-01-18 11:43:25,146 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:43:25,146 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:43:25,146 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: T21 (T21)=True 
2024-01-18 11:43:25,146 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: NU (NU)=True 
2024-01-18 11:43:25,146 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:43:25.145496", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:43:25,146 DEBUG: Sending PUBLISH (d0, q0, r1, m732), 'b'enoceanmqtt/cover/zimmerfabi/f6'', ... (139 bytes)
2024-01-18 11:43:25,880 DEBUG: FF:83:EB:82->FF:FF:FF:FF (-67 dBm): 0x01 ['0xa5', '0x0', '0xd', '0x1', '0xa', '0xff', '0x83', '0xeb', '0x82', '0x20'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 13.0, 'raw_value': 13}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:43:25,881 DEBUG: enoceanmqtt/cover/bad/a5: DB3 (Data Byte 3)=0.0 
2024-01-18 11:43:25,881 DEBUG: enoceanmqtt/cover/bad/a5: DB2 (Data Byte 2)=13.0 
2024-01-18 11:43:25,881 DEBUG: enoceanmqtt/cover/bad/a5: DB1 (Data Byte 1)=1.0 
2024-01-18 11:43:25,881 DEBUG: enoceanmqtt/cover/bad/a5: DB0 (Data Byte 0)=10.0 
2024-01-18 11:43:25,881 DEBUG: enoceanmqtt/cover/bad/a5: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:43:25.880872", "_RAW_DATA_": "00:0D:01:0A:20", "DB3": 0.0, "DB2": 13.0, "DB1": 1.0, "DB0": 10.0}
2024-01-18 11:43:25,881 DEBUG: Sending PUBLISH (d0, q0, r1, m733), 'b'enoceanmqtt/cover/bad/a5'', ... (137 bytes)
2024-01-18 11:43:26,408 DEBUG: FF:83:EB:8C->FF:FF:FF:FF (-67 dBm): 0x01 ['0xa5', '0x0', '0x11', '0x1', '0xa', '0xff', '0x83', '0xeb', '0x8c', '0x20'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 17.0, 'raw_value': 17}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:43:26,408 DEBUG: enoceanmqtt/cover/wc/a5: DB3 (Data Byte 3)=0.0 
2024-01-18 11:43:26,409 DEBUG: enoceanmqtt/cover/wc/a5: DB2 (Data Byte 2)=17.0 
2024-01-18 11:43:26,409 DEBUG: enoceanmqtt/cover/wc/a5: DB1 (Data Byte 1)=1.0 
2024-01-18 11:43:26,409 DEBUG: enoceanmqtt/cover/wc/a5: DB0 (Data Byte 0)=10.0 
2024-01-18 11:43:26,409 DEBUG: enoceanmqtt/cover/wc/a5: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:43:26.408145", "_RAW_DATA_": "00:11:01:0A:20", "DB3": 0.0, "DB2": 17.0, "DB1": 1.0, "DB0": 10.0}
2024-01-18 11:43:26,409 DEBUG: Sending PUBLISH (d0, q0, r1, m734), 'b'enoceanmqtt/cover/wc/a5'', ... (137 bytes)
2024-01-18 11:43:55,179 DEBUG: FF:83:EB:8A->FF:FF:FF:FF (-65 dBm): 0x01 ['0xf6', '0x70', '0xff', '0x83', '0xeb', '0x8a', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x41', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button BO', 'raw_value': 3}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:43:55,179 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R1 (Rocker 1st action)=Button BO 
2024-01-18 11:43:55,179 DEBUG: enoceanmqtt/cover/kuechelinks/f6: EB (Energy bow)=pressed 
2024-01-18 11:43:55,179 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:43:55,179 DEBUG: enoceanmqtt/cover/kuechelinks/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:43:55,179 DEBUG: enoceanmqtt/cover/kuechelinks/f6: T21 (T21)=True 
2024-01-18 11:43:55,180 DEBUG: enoceanmqtt/cover/kuechelinks/f6: NU (NU)=True 
2024-01-18 11:43:55,180 DEBUG: enoceanmqtt/cover/kuechelinks/f6: Sent MQTT: {"_RSSI_": -65, "_DATE_": "2024-01-18T11:43:55.179091", "_RAW_DATA_": "70:30", "R1": 3, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:43:55,180 DEBUG: Sending PUBLISH (d0, q0, r1, m735), 'b'enoceanmqtt/cover/kuechelinks/f6'', ... (139 bytes)
2024-01-18 11:43:56,181 DEBUG: Sending PINGREQ
2024-01-18 11:43:56,181 DEBUG: Received PINGRESP
2024-01-18 11:44:56,252 DEBUG: Sending PINGREQ
2024-01-18 11:44:56,254 DEBUG: Received PINGRESP

Triggered "close"/sunset on 11:46:30

2024-01-18 11:46:32,082 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/zimmerfabi/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,083 DEBUG: Got MQTT message: enoceanmqtt/cover/zimmerfabi/a5/req
2024-01-18 11:46:32,083 DEBUG: Send Payload: clear
2024-01-18 11:46:32,083 DEBUG: enoceanmqtt/cover/zimmerfabi/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,083 DEBUG: Trigger message to: enoceanmqtt/cover/zimmerfabi/a5
2024-01-18 11:46:32,083 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,084 INFO: sending: FF:82:63:99->FF:83:EB:8E (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x99', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8e', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,085 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,124 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/kuechelinks/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,129 DEBUG: Got MQTT message: enoceanmqtt/cover/kuechelinks/a5/req
2024-01-18 11:46:32,129 INFO: Sending packet
2024-01-18 11:46:32,132 DEBUG: Send Payload: clear
2024-01-18 11:46:32,133 DEBUG: enoceanmqtt/cover/kuechelinks/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,132 DEBUG: FF:82:63:99->FF:83:EB:8E (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x99', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8e', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,135 DEBUG: Trigger message to: enoceanmqtt/cover/kuechelinks/a5
2024-01-18 11:46:32,145 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,147 INFO: sending: FF:82:63:95->FF:83:EB:8A (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x95', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8a', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,147 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,147 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/wc/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,147 DEBUG: Got MQTT message: enoceanmqtt/cover/wc/a5/req
2024-01-18 11:46:32,148 DEBUG: Send Payload: clear
2024-01-18 11:46:32,148 DEBUG: enoceanmqtt/cover/wc/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,148 DEBUG: Trigger message to: enoceanmqtt/cover/wc/a5
2024-01-18 11:46:32,148 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,149 INFO: sending: FF:82:63:97->FF:83:EB:8C (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x97', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8c', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,151 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,151 INFO: Sending packet
2024-01-18 11:46:32,151 DEBUG: FF:82:63:95->FF:83:EB:8A (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x95', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8a', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,151 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/bad/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,152 INFO: Sending packet
2024-01-18 11:46:32,152 DEBUG: Got MQTT message: enoceanmqtt/cover/bad/a5/req
2024-01-18 11:46:32,155 DEBUG: FF:82:63:97->FF:83:EB:8C (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x97', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8c', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,155 DEBUG: Send Payload: clear
2024-01-18 11:46:32,155 DEBUG: enoceanmqtt/cover/bad/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,161 DEBUG: Trigger message to: enoceanmqtt/cover/bad/a5
2024-01-18 11:46:32,163 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,164 INFO: sending: FF:82:63:91->FF:83:EB:82 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x91', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x82', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,165 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,165 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/zimmersarah/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,165 DEBUG: Got MQTT message: enoceanmqtt/cover/zimmersarah/a5/req
2024-01-18 11:46:32,165 DEBUG: Send Payload: clear
2024-01-18 11:46:32,165 DEBUG: enoceanmqtt/cover/zimmersarah/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,165 DEBUG: Trigger message to: enoceanmqtt/cover/zimmersarah/a5
2024-01-18 11:46:32,165 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,166 INFO: sending: FF:82:63:98->FF:83:EB:8D (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x98', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8d', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,167 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,167 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/kuechegarten/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,167 DEBUG: Got MQTT message: enoceanmqtt/cover/kuechegarten/a5/req
2024-01-18 11:46:32,167 DEBUG: Send Payload: clear
2024-01-18 11:46:32,167 DEBUG: enoceanmqtt/cover/kuechegarten/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,167 DEBUG: Trigger message to: enoceanmqtt/cover/kuechegarten/a5
2024-01-18 11:46:32,167 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,168 INFO: sending: FF:82:63:93->FF:83:EB:84 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x93', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x84', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,168 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,169 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/esszimmer/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,169 DEBUG: Got MQTT message: enoceanmqtt/cover/esszimmer/a5/req
2024-01-18 11:46:32,169 DEBUG: Send Payload: clear
2024-01-18 11:46:32,169 DEBUG: enoceanmqtt/cover/esszimmer/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,169 DEBUG: Trigger message to: enoceanmqtt/cover/esszimmer/a5
2024-01-18 11:46:32,169 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,170 INFO: sending: FF:82:63:96->FF:83:EB:8B (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x96', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8b', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,171 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,171 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/wohnzimmerrechts/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,171 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:46:32,171 INFO: got response packet: OK
2024-01-18 11:46:32,171 DEBUG: Got MQTT message: enoceanmqtt/cover/wohnzimmerrechts/a5/req
2024-01-18 11:46:32,171 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:46:32,171 INFO: got response packet: OK
2024-01-18 11:46:32,171 DEBUG: Send Payload: clear
2024-01-18 11:46:32,172 INFO: Sending packet
2024-01-18 11:46:32,172 DEBUG: enoceanmqtt/cover/wohnzimmerrechts/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,172 DEBUG: FF:82:63:91->FF:83:EB:82 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x91', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x82', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,172 DEBUG: Trigger message to: enoceanmqtt/cover/wohnzimmerrechts/a5
2024-01-18 11:46:32,172 INFO: Sending packet
2024-01-18 11:46:32,173 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,173 DEBUG: FF:82:63:98->FF:83:EB:8D (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x98', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8d', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,174 INFO: sending: FF:82:63:94->FF:83:EB:89 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x94', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x89', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,174 INFO: Sending packet
2024-01-18 11:46:32,174 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,174 DEBUG: FF:82:63:93->FF:83:EB:84 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x93', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x84', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,175 INFO: Sending packet
2024-01-18 11:46:32,175 DEBUG: FF:82:63:96->FF:83:EB:8B (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x96', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8b', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,175 INFO: Sending packet
2024-01-18 11:46:32,175 DEBUG: FF:82:63:94->FF:83:EB:89 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x94', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x89', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,175 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/schlafzimmer/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,175 DEBUG: Got MQTT message: enoceanmqtt/cover/schlafzimmer/a5/req
2024-01-18 11:46:32,175 DEBUG: Send Payload: clear
2024-01-18 11:46:32,175 DEBUG: enoceanmqtt/cover/schlafzimmer/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,175 DEBUG: Trigger message to: enoceanmqtt/cover/schlafzimmer/a5
2024-01-18 11:46:32,176 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,177 INFO: sending: FF:82:63:90->FF:83:EB:81 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x90', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x81', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,177 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,177 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/wohnzimmerbalkon/a5/req', ...  (56 bytes)
2024-01-18 11:46:32,177 DEBUG: Got MQTT message: enoceanmqtt/cover/wohnzimmerbalkon/a5/req
2024-01-18 11:46:32,177 DEBUG: Send Payload: clear
2024-01-18 11:46:32,177 DEBUG: enoceanmqtt/cover/wohnzimmerbalkon/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,178 DEBUG: Trigger message to: enoceanmqtt/cover/wohnzimmerbalkon/a5
2024-01-18 11:46:32,178 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-01-18 11:46:32,179 INFO: sending: FF:82:63:92->FF:83:EB:83 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x92', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x83', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,179 DEBUG: Clearing data buffer.
2024-01-18 11:46:32,187 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:46:32,187 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:46:32,188 INFO: got response packet: OK
2024-01-18 11:46:32,188 INFO: got response packet: OK
2024-01-18 11:46:32,188 INFO: Sending packet
2024-01-18 11:46:32,188 DEBUG: FF:82:63:90->FF:83:EB:81 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x90', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x81', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,188 INFO: Sending packet
2024-01-18 11:46:32,188 DEBUG: FF:82:63:92->FF:83:EB:83 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0x82', '0x63', '0x92', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x83', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:46:32,220 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:46:32,223 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:46:32,223 INFO: got response packet: OK
2024-01-18 11:46:32,223 INFO: got response packet: OK
2024-01-18 11:46:32,945 DEBUG: FF:83:EB:82->FF:FF:FF:FF (-61 dBm): 0x01 ['0xf6', '0x2', '0xff', '0x83', '0xeb', '0x82', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x3d', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'released', 'raw_value': 0}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AO', 'raw_value': 1}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:46:32,949 DEBUG: enoceanmqtt/cover/bad/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:46:32,950 DEBUG: enoceanmqtt/cover/bad/f6: EB (Energy bow)=released 
2024-01-18 11:46:32,951 DEBUG: enoceanmqtt/cover/bad/f6: R2 (Rocker 2nd action)=Button AO 
2024-01-18 11:46:32,951 DEBUG: enoceanmqtt/cover/bad/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:46:32,952 DEBUG: enoceanmqtt/cover/bad/f6: T21 (T21)=True 
2024-01-18 11:46:32,953 DEBUG: enoceanmqtt/cover/bad/f6: NU (NU)=True 
2024-01-18 11:46:32,954 DEBUG: enoceanmqtt/cover/bad/f6: Sent MQTT: {"_RSSI_": -61, "_DATE_": "2024-01-18T11:46:32.944172", "_RAW_DATA_": "02:30", "R1": 0, "EB": 0, "R2": 1, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:46:32,954 DEBUG: Sending PUBLISH (d0, q0, r1, m736), 'b'enoceanmqtt/cover/bad/f6'', ... (139 bytes)
2024-01-18 11:46:33,055 DEBUG: FF:83:EB:84->FF:FF:FF:FF (-64 dBm): 0x01 ['0xf6', '0x2', '0xff', '0x83', '0xeb', '0x84', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x40', '0x0'] OrderedDict()
2024-01-18 11:46:33,059 DEBUG: enoceanmqtt/cover/kuechegarten/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:46:33,060 DEBUG: enoceanmqtt/cover/kuechegarten/f6: EB (Energy bow)=released 
2024-01-18 11:46:33,062 DEBUG: enoceanmqtt/cover/kuechegarten/f6: R2 (Rocker 2nd action)=Button AO 
2024-01-18 11:46:33,062 DEBUG: enoceanmqtt/cover/kuechegarten/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:46:33,062 DEBUG: enoceanmqtt/cover/kuechegarten/f6: T21 (T21)=True 
2024-01-18 11:46:33,062 DEBUG: enoceanmqtt/cover/kuechegarten/f6: NU (NU)=True 
2024-01-18 11:46:33,062 DEBUG: enoceanmqtt/cover/kuechegarten/f6: Sent MQTT: {"_RSSI_": -64, "_DATE_": "2024-01-18T11:46:33.055188", "_RAW_DATA_": "02:30", "R1": 0, "EB": 0, "R2": 1, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:46:33,062 DEBUG: Sending PUBLISH (d0, q0, r1, m737), 'b'enoceanmqtt/cover/kuechegarten/f6'', ... (139 bytes)
2024-01-18 11:46:33,374 DEBUG: FF:83:EB:8A->FF:FF:FF:FF (-61 dBm): 0x01 ['0xf6', '0x2', '0xff', '0x83', '0xeb', '0x8a', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x3d', '0x0'] OrderedDict()
2024-01-18 11:46:33,375 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:46:33,375 DEBUG: enoceanmqtt/cover/kuechelinks/f6: EB (Energy bow)=released 
2024-01-18 11:46:33,375 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R2 (Rocker 2nd action)=Button AO 
2024-01-18 11:46:33,375 DEBUG: enoceanmqtt/cover/kuechelinks/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:46:33,375 DEBUG: enoceanmqtt/cover/kuechelinks/f6: T21 (T21)=True 
2024-01-18 11:46:33,375 DEBUG: enoceanmqtt/cover/kuechelinks/f6: NU (NU)=True 
2024-01-18 11:46:33,375 DEBUG: enoceanmqtt/cover/kuechelinks/f6: Sent MQTT: {"_RSSI_": -61, "_DATE_": "2024-01-18T11:46:33.374642", "_RAW_DATA_": "02:30", "R1": 0, "EB": 0, "R2": 1, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:46:33,375 DEBUG: Sending PUBLISH (d0, q0, r1, m738), 'b'enoceanmqtt/cover/kuechelinks/f6'', ... (139 bytes)
2024-01-18 11:46:33,434 DEBUG: FF:83:EB:8C->FF:FF:FF:FF (-61 dBm): 0x01 ['0xf6', '0x2', '0xff', '0x83', '0xeb', '0x8c', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x3d', '0x0'] OrderedDict()
2024-01-18 11:46:33,435 DEBUG: enoceanmqtt/cover/wc/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:46:33,435 DEBUG: enoceanmqtt/cover/wc/f6: EB (Energy bow)=released 
2024-01-18 11:46:33,435 DEBUG: enoceanmqtt/cover/wc/f6: R2 (Rocker 2nd action)=Button AO 
2024-01-18 11:46:33,435 DEBUG: enoceanmqtt/cover/wc/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:46:33,435 DEBUG: enoceanmqtt/cover/wc/f6: T21 (T21)=True 
2024-01-18 11:46:33,435 DEBUG: enoceanmqtt/cover/wc/f6: NU (NU)=True 
2024-01-18 11:46:33,435 DEBUG: enoceanmqtt/cover/wc/f6: Sent MQTT: {"_RSSI_": -61, "_DATE_": "2024-01-18T11:46:33.434367", "_RAW_DATA_": "02:30", "R1": 0, "EB": 0, "R2": 1, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:46:33,435 DEBUG: Sending PUBLISH (d0, q0, r1, m739), 'b'enoceanmqtt/cover/wc/f6'', ... (139 bytes)
2024-01-18 11:46:33,500 DEBUG: FF:83:EB:8D->FF:FF:FF:FF (-61 dBm): 0x01 ['0xf6', '0x2', '0xff', '0x83', '0xeb', '0x8d', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x3d', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'released', 'raw_value': 0}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AO', 'raw_value': 1}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:46:33,501 DEBUG: enoceanmqtt/cover/zimmersarah/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:46:33,501 DEBUG: enoceanmqtt/cover/zimmersarah/f6: EB (Energy bow)=released 
2024-01-18 11:46:33,502 DEBUG: enoceanmqtt/cover/zimmersarah/f6: R2 (Rocker 2nd action)=Button AO 
2024-01-18 11:46:33,502 DEBUG: enoceanmqtt/cover/zimmersarah/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:46:33,502 DEBUG: enoceanmqtt/cover/zimmersarah/f6: T21 (T21)=True 
2024-01-18 11:46:33,502 DEBUG: enoceanmqtt/cover/zimmersarah/f6: NU (NU)=True 
2024-01-18 11:46:33,502 DEBUG: enoceanmqtt/cover/zimmersarah/f6: Sent MQTT: {"_RSSI_": -61, "_DATE_": "2024-01-18T11:46:33.499555", "_RAW_DATA_": "02:30", "R1": 0, "EB": 0, "R2": 1, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:46:33,502 DEBUG: Sending PUBLISH (d0, q0, r1, m740), 'b'enoceanmqtt/cover/zimmersarah/f6'', ... (139 bytes)
2024-01-18 11:46:33,603 DEBUG: FF:83:EB:8E->FF:FF:FF:FF (-61 dBm): 0x01 ['0xa5', '0x7', '0x3b', '0x1', '0xa', '0xff', '0x83', '0xeb', '0x8e', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x3d', '0x0'] OrderedDict()
2024-01-18 11:46:33,604 DEBUG: enoceanmqtt/cover/zimmerfabi/a5: DB3 (Data Byte 3)=7.0 
2024-01-18 11:46:33,604 DEBUG: enoceanmqtt/cover/zimmerfabi/a5: DB2 (Data Byte 2)=59.0 
2024-01-18 11:46:33,604 DEBUG: enoceanmqtt/cover/zimmerfabi/a5: DB1 (Data Byte 1)=1.0 
2024-01-18 11:46:33,604 DEBUG: enoceanmqtt/cover/zimmerfabi/a5: DB0 (Data Byte 0)=10.0 
2024-01-18 11:46:33,604 DEBUG: enoceanmqtt/cover/zimmerfabi/a5: Sent MQTT: {"_RSSI_": -61, "_DATE_": "2024-01-18T11:46:33.603359", "_RAW_DATA_": "07:3B:01:0A:30", "DB3": 7.0, "DB2": 59.0, "DB1": 1.0, "DB0": 10.0}
2024-01-18 11:46:33,604 DEBUG: Sending PUBLISH (d0, q0, r1, m741), 'b'enoceanmqtt/cover/zimmerfabi/a5'', ... (137 bytes)
2024-01-18 11:46:34,989 DEBUG: FF:83:EB:8E->FF:FF:FF:FF (-61 dBm): 0x01 ['0xf6', '0x2', '0xff', '0x83', '0xeb', '0x8e', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x3d', '0x0'] OrderedDict()
2024-01-18 11:46:34,989 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:46:34,989 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: EB (Energy bow)=released 
2024-01-18 11:46:34,989 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R2 (Rocker 2nd action)=Button AO 
2024-01-18 11:46:34,989 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:46:34,989 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: T21 (T21)=True 
2024-01-18 11:46:34,989 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: NU (NU)=True 
2024-01-18 11:46:34,989 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: Sent MQTT: {"_RSSI_": -61, "_DATE_": "2024-01-18T11:46:34.988959", "_RAW_DATA_": "02:30", "R1": 0, "EB": 0, "R2": 1, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:46:34,990 DEBUG: Sending PUBLISH (d0, q0, r1, m742), 'b'enoceanmqtt/cover/zimmerfabi/f6'', ... (139 bytes)
2024-01-18 11:46:57,013 DEBUG: Sending PINGREQ
2024-01-18 11:46:57,014 DEBUG: Received PINGRESP
2024-01-18 11:47:03,249 DEBUG: FF:83:EB:82->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x83', '0xeb', '0x82', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button BI', 'raw_value': 2}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:47:03,249 DEBUG: enoceanmqtt/cover/bad/f6: R1 (Rocker 1st action)=Button BI 
2024-01-18 11:47:03,249 DEBUG: enoceanmqtt/cover/bad/f6: EB (Energy bow)=pressed 
2024-01-18 11:47:03,250 DEBUG: enoceanmqtt/cover/bad/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:47:03,250 DEBUG: enoceanmqtt/cover/bad/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:47:03,250 DEBUG: enoceanmqtt/cover/bad/f6: T21 (T21)=True 
2024-01-18 11:47:03,250 DEBUG: enoceanmqtt/cover/bad/f6: NU (NU)=True 
2024-01-18 11:47:03,250 DEBUG: enoceanmqtt/cover/bad/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:47:03.249243", "_RAW_DATA_": "50:30", "R1": 2, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:47:03,250 DEBUG: Sending PUBLISH (d0, q0, r1, m743), 'b'enoceanmqtt/cover/bad/f6'', ... (139 bytes)
2024-01-18 11:47:03,361 DEBUG: FF:83:EB:84->FF:FF:FF:FF (-65 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x83', '0xeb', '0x84', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x41', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button BI', 'raw_value': 2}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:47:03,361 DEBUG: enoceanmqtt/cover/kuechegarten/f6: R1 (Rocker 1st action)=Button BI 
2024-01-18 11:47:03,361 DEBUG: enoceanmqtt/cover/kuechegarten/f6: EB (Energy bow)=pressed 
2024-01-18 11:47:03,361 DEBUG: enoceanmqtt/cover/kuechegarten/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:47:03,361 DEBUG: enoceanmqtt/cover/kuechegarten/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:47:03,362 DEBUG: enoceanmqtt/cover/kuechegarten/f6: T21 (T21)=True 
2024-01-18 11:47:03,362 DEBUG: enoceanmqtt/cover/kuechegarten/f6: NU (NU)=True 
2024-01-18 11:47:03,362 DEBUG: enoceanmqtt/cover/kuechegarten/f6: Sent MQTT: {"_RSSI_": -65, "_DATE_": "2024-01-18T11:47:03.361171", "_RAW_DATA_": "50:30", "R1": 2, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:47:03,362 DEBUG: Sending PUBLISH (d0, q0, r1, m744), 'b'enoceanmqtt/cover/kuechegarten/f6'', ... (139 bytes)
2024-01-18 11:47:03,680 DEBUG: FF:83:EB:8A->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x83', '0xeb', '0x8a', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:47:03,683 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R1 (Rocker 1st action)=Button BI 
2024-01-18 11:47:03,684 DEBUG: enoceanmqtt/cover/kuechelinks/f6: EB (Energy bow)=pressed 
2024-01-18 11:47:03,684 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:47:03,685 DEBUG: enoceanmqtt/cover/kuechelinks/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:47:03,685 DEBUG: enoceanmqtt/cover/kuechelinks/f6: T21 (T21)=True 
2024-01-18 11:47:03,686 DEBUG: enoceanmqtt/cover/kuechelinks/f6: NU (NU)=True 
2024-01-18 11:47:03,687 DEBUG: enoceanmqtt/cover/kuechelinks/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:47:03.680838", "_RAW_DATA_": "50:30", "R1": 2, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:47:03,689 DEBUG: Sending PUBLISH (d0, q0, r1, m745), 'b'enoceanmqtt/cover/kuechelinks/f6'', ... (139 bytes)
2024-01-18 11:47:03,781 DEBUG: FF:83:EB:8C->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x83', '0xeb', '0x8c', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:47:03,786 DEBUG: enoceanmqtt/cover/wc/f6: R1 (Rocker 1st action)=Button BI 
2024-01-18 11:47:03,788 DEBUG: enoceanmqtt/cover/wc/f6: EB (Energy bow)=pressed 
2024-01-18 11:47:03,790 DEBUG: enoceanmqtt/cover/wc/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:47:03,791 DEBUG: enoceanmqtt/cover/wc/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:47:03,793 DEBUG: enoceanmqtt/cover/wc/f6: T21 (T21)=True 
2024-01-18 11:47:03,793 DEBUG: enoceanmqtt/cover/wc/f6: NU (NU)=True 
2024-01-18 11:47:03,794 DEBUG: enoceanmqtt/cover/wc/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:47:03.781365", "_RAW_DATA_": "50:30", "R1": 2, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:47:03,795 DEBUG: Sending PUBLISH (d0, q0, r1, m746), 'b'enoceanmqtt/cover/wc/f6'', ... (139 bytes)
2024-01-18 11:47:57,857 DEBUG: Sending PINGREQ
2024-01-18 11:47:57,858 DEBUG: Received PINGRESP

Result:
All covers are "down" which is correct

Open again

2024-01-18 11:49:55,669 DEBUG: FF:83:EB:8D->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x83', '0xeb', '0x8d', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:49:55,674 DEBUG: enoceanmqtt/cover/zimmersarah/f6: R1 (Rocker 1st action)=Button BI 
2024-01-18 11:49:55,676 DEBUG: enoceanmqtt/cover/zimmersarah/f6: EB (Energy bow)=pressed 
2024-01-18 11:49:55,678 DEBUG: enoceanmqtt/cover/zimmersarah/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:49:55,680 DEBUG: enoceanmqtt/cover/zimmersarah/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:49:55,681 DEBUG: enoceanmqtt/cover/zimmersarah/f6: T21 (T21)=True 
2024-01-18 11:49:55,681 DEBUG: enoceanmqtt/cover/zimmersarah/f6: NU (NU)=True 
2024-01-18 11:49:55,682 DEBUG: enoceanmqtt/cover/zimmersarah/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:49:55.669360", "_RAW_DATA_": "50:30", "R1": 2, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:49:55,683 DEBUG: Sending PUBLISH (d0, q0, r1, m747), 'b'enoceanmqtt/cover/zimmersarah/f6'', ... (139 bytes)
2024-01-18 11:49:57,107 DEBUG: FF:83:EB:8E->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x83', '0xeb', '0x8e', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:49:57,110 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R1 (Rocker 1st action)=Button BI 
2024-01-18 11:49:57,111 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: EB (Energy bow)=pressed 
2024-01-18 11:49:57,112 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:49:57,112 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:49:57,112 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: T21 (T21)=True 
2024-01-18 11:49:57,112 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: NU (NU)=True 
2024-01-18 11:49:57,112 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:49:57.107902", "_RAW_DATA_": "50:30", "R1": 2, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:49:57,112 DEBUG: Sending PUBLISH (d0, q0, r1, m748), 'b'enoceanmqtt/cover/zimmerfabi/f6'', ... (139 bytes)
2024-01-18 11:49:58,114 DEBUG: Sending PINGREQ
2024-01-18 11:49:58,115 DEBUG: Received PINGRESP
2024-01-18 11:50:58,180 DEBUG: Sending PINGREQ
2024-01-18 11:50:58,181 DEBUG: Received PINGRESP
2024-01-18 11:51:58,255 DEBUG: Sending PINGREQ
2024-01-18 11:51:58,256 DEBUG: Received PINGRESP
2024-01-18 11:52:04,700 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/wc/a5/req', ...  (58 bytes)
2024-01-18 11:52:04,701 DEBUG: Got MQTT message: enoceanmqtt/cover/wc/a5/req
2024-01-18 11:52:04,701 DEBUG: Send Payload: clear
2024-01-18 11:52:04,701 DEBUG: enoceanmqtt/cover/wc/a5: req={'DB3': 0, 'DB2': 17, 'DB1': 1, 'DB0': 10}
2024-01-18 11:52:04,701 DEBUG: Trigger message to: enoceanmqtt/cover/wc/a5
2024-01-18 11:52:04,702 DEBUG: sensor data: {'DB3': 0, 'DB2': 17, 'DB1': 1, 'DB0': 10}
2024-01-18 11:52:04,703 INFO: sending: FF:82:63:97->FF:83:EB:8C (-255 dBm): 0x01 ['0xa5', '0x0', '0x11', '0x1', '0xa', '0xff', '0x82', '0x63', '0x97', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8c', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 17.0, 'raw_value': 17}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:52:04,703 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,716 INFO: Sending packet
2024-01-18 11:52:04,716 DEBUG: FF:82:63:97->FF:83:EB:8C (-255 dBm): 0x01 ['0xa5', '0x0', '0x11', '0x1', '0xa', '0xff', '0x82', '0x63', '0x97', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8c', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 17.0, 'raw_value': 17}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:52:04,742 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/bad/a5/req', ...  (58 bytes)
2024-01-18 11:52:04,743 DEBUG: Got MQTT message: enoceanmqtt/cover/bad/a5/req
2024-01-18 11:52:04,744 DEBUG: Send Payload: clear
2024-01-18 11:52:04,744 DEBUG: enoceanmqtt/cover/bad/a5: req={'DB3': 0, 'DB2': 13, 'DB1': 1, 'DB0': 10}
2024-01-18 11:52:04,744 DEBUG: Trigger message to: enoceanmqtt/cover/bad/a5
2024-01-18 11:52:04,756 DEBUG: sensor data: {'DB3': 0, 'DB2': 13, 'DB1': 1, 'DB0': 10}
2024-01-18 11:52:04,777 INFO: sending: FF:82:63:91->FF:83:EB:82 (-255 dBm): 0x01 ['0xa5', '0x0', '0xd', '0x1', '0xa', '0xff', '0x82', '0x63', '0x91', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x82', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 13.0, 'raw_value': 13}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:52:04,778 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,778 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/schlafzimmer/a5/req', ...  (58 bytes)
2024-01-18 11:52:04,779 DEBUG: Got MQTT message: enoceanmqtt/cover/schlafzimmer/a5/req
2024-01-18 11:52:04,779 DEBUG: Send Payload: clear
2024-01-18 11:52:04,780 DEBUG: enoceanmqtt/cover/schlafzimmer/a5: req={'DB3': 0, 'DB2': 12, 'DB1': 1, 'DB0': 10}
2024-01-18 11:52:04,780 DEBUG: Trigger message to: enoceanmqtt/cover/schlafzimmer/a5
2024-01-18 11:52:04,786 DEBUG: sensor data: {'DB3': 0, 'DB2': 12, 'DB1': 1, 'DB0': 10}
2024-01-18 11:52:04,804 INFO: sending: FF:82:63:90->FF:83:EB:81 (-255 dBm): 0x01 ['0xa5', '0x0', '0xc', '0x1', '0xa', '0xff', '0x82', '0x63', '0x90', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x81', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 12.0, 'raw_value': 12}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:52:04,806 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,807 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/zimmerfabi/a5/req', ...  (56 bytes)
2024-01-18 11:52:04,807 DEBUG: Got MQTT message: enoceanmqtt/cover/zimmerfabi/a5/req
2024-01-18 11:52:04,808 DEBUG: Send Payload: clear
2024-01-18 11:52:04,809 DEBUG: enoceanmqtt/cover/zimmerfabi/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,810 DEBUG: Trigger message to: enoceanmqtt/cover/zimmerfabi/a5
2024-01-18 11:52:04,814 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,822 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:52:04,822 INFO: Sending packet
2024-01-18 11:52:04,822 DEBUG: FF:82:63:91->FF:83:EB:82 (-255 dBm): 0x01 ['0xa5', '0x0', '0xd', '0x1', '0xa', '0xff', '0x82', '0x63', '0x91', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x82', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 13.0, 'raw_value': 13}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:52:04,822 INFO: Sending packet
2024-01-18 11:52:04,822 DEBUG: FF:82:63:90->FF:83:EB:81 (-255 dBm): 0x01 ['0xa5', '0x0', '0xc', '0x1', '0xa', '0xff', '0x82', '0x63', '0x90', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x81', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 12.0, 'raw_value': 12}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 10.0, 'raw_value': 10})])
2024-01-18 11:52:04,824 INFO: got response packet: OK
2024-01-18 11:52:04,829 INFO: sending: FF:82:63:99->FF:83:EB:8E (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x99', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8e', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,829 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,829 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/kuechelinks/a5/req', ...  (56 bytes)
2024-01-18 11:52:04,829 DEBUG: Got MQTT message: enoceanmqtt/cover/kuechelinks/a5/req
2024-01-18 11:52:04,829 DEBUG: Send Payload: clear
2024-01-18 11:52:04,829 DEBUG: enoceanmqtt/cover/kuechelinks/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,829 DEBUG: Trigger message to: enoceanmqtt/cover/kuechelinks/a5
2024-01-18 11:52:04,830 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,831 INFO: sending: FF:82:63:95->FF:83:EB:8A (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x95', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8a', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,831 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,831 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/zimmersarah/a5/req', ...  (56 bytes)
2024-01-18 11:52:04,831 DEBUG: Got MQTT message: enoceanmqtt/cover/zimmersarah/a5/req
2024-01-18 11:52:04,831 DEBUG: Send Payload: clear
2024-01-18 11:52:04,832 DEBUG: enoceanmqtt/cover/zimmersarah/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,832 DEBUG: Trigger message to: enoceanmqtt/cover/zimmersarah/a5
2024-01-18 11:52:04,832 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,834 INFO: sending: FF:82:63:98->FF:83:EB:8D (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x98', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8d', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,834 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,834 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/kuechegarten/a5/req', ...  (56 bytes)
2024-01-18 11:52:04,834 DEBUG: Got MQTT message: enoceanmqtt/cover/kuechegarten/a5/req
2024-01-18 11:52:04,834 DEBUG: Send Payload: clear
2024-01-18 11:52:04,834 DEBUG: enoceanmqtt/cover/kuechegarten/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,834 DEBUG: Trigger message to: enoceanmqtt/cover/kuechegarten/a5
2024-01-18 11:52:04,835 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,836 INFO: sending: FF:82:63:93->FF:83:EB:84 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x93', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x84', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,837 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,837 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/esszimmer/a5/req', ...  (56 bytes)
2024-01-18 11:52:04,837 DEBUG: Got MQTT message: enoceanmqtt/cover/esszimmer/a5/req
2024-01-18 11:52:04,837 DEBUG: Send Payload: clear
2024-01-18 11:52:04,837 DEBUG: enoceanmqtt/cover/esszimmer/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,837 DEBUG: Trigger message to: enoceanmqtt/cover/esszimmer/a5
2024-01-18 11:52:04,838 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,839 INFO: sending: FF:82:63:96->FF:83:EB:8B (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x96', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8b', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,839 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,839 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/wohnzimmerrechts/a5/req', ...  (56 bytes)
2024-01-18 11:52:04,839 DEBUG: Got MQTT message: enoceanmqtt/cover/wohnzimmerrechts/a5/req
2024-01-18 11:52:04,840 DEBUG: Send Payload: clear
2024-01-18 11:52:04,840 DEBUG: enoceanmqtt/cover/wohnzimmerrechts/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,840 DEBUG: Trigger message to: enoceanmqtt/cover/wohnzimmerrechts/a5
2024-01-18 11:52:04,840 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,841 INFO: sending: FF:82:63:94->FF:83:EB:89 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x94', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x89', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,841 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,841 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enoceanmqtt/cover/wohnzimmerbalkon/a5/req', ...  (56 bytes)
2024-01-18 11:52:04,841 DEBUG: Got MQTT message: enoceanmqtt/cover/wohnzimmerbalkon/a5/req
2024-01-18 11:52:04,841 DEBUG: Send Payload: clear
2024-01-18 11:52:04,841 DEBUG: enoceanmqtt/cover/wohnzimmerbalkon/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,842 DEBUG: Trigger message to: enoceanmqtt/cover/wohnzimmerbalkon/a5
2024-01-18 11:52:04,842 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 1, 'DB0': 8}
2024-01-18 11:52:04,843 INFO: sending: FF:82:63:92->FF:83:EB:83 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x92', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x83', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,844 DEBUG: Clearing data buffer.
2024-01-18 11:52:04,849 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:52:04,849 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:52:04,850 INFO: got response packet: OK
2024-01-18 11:52:04,850 INFO: Sending packet
2024-01-18 11:52:04,850 INFO: got response packet: OK
2024-01-18 11:52:04,850 DEBUG: FF:82:63:99->FF:83:EB:8E (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x99', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8e', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,851 INFO: Sending packet
2024-01-18 11:52:04,851 DEBUG: FF:82:63:95->FF:83:EB:8A (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x95', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8a', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,851 INFO: Sending packet
2024-01-18 11:52:04,851 DEBUG: FF:82:63:98->FF:83:EB:8D (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x98', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8d', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,852 INFO: Sending packet
2024-01-18 11:52:04,852 DEBUG: FF:82:63:93->FF:83:EB:84 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x93', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x84', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,852 INFO: Sending packet
2024-01-18 11:52:04,852 DEBUG: FF:82:63:96->FF:83:EB:8B (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x96', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x8b', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,853 INFO: Sending packet
2024-01-18 11:52:04,853 DEBUG: FF:82:63:94->FF:83:EB:89 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x94', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x89', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,853 INFO: Sending packet
2024-01-18 11:52:04,853 DEBUG: FF:82:63:92->FF:83:EB:83 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x1', '0x8', '0xff', '0x82', '0x63', '0x92', '0x0'] ['0x3', '0xff', '0x83', '0xeb', '0x83', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 1.0, 'raw_value': 1}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-01-18 11:52:04,881 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:52:04,881 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:52:04,882 INFO: got response packet: OK
2024-01-18 11:52:04,882 INFO: got response packet: OK
2024-01-18 11:52:04,897 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:52:04,897 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-01-18 11:52:04,898 INFO: got response packet: OK
2024-01-18 11:52:04,899 INFO: got response packet: OK
2024-01-18 11:52:05,840 DEBUG: FF:83:EB:82->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x82', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:52:05,843 DEBUG: enoceanmqtt/cover/bad/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:52:05,844 DEBUG: enoceanmqtt/cover/bad/f6: EB (Energy bow)=released 
2024-01-18 11:52:05,845 DEBUG: enoceanmqtt/cover/bad/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:52:05,846 DEBUG: enoceanmqtt/cover/bad/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:52:05,846 DEBUG: enoceanmqtt/cover/bad/f6: T21 (T21)=True 
2024-01-18 11:52:05,847 DEBUG: enoceanmqtt/cover/bad/f6: NU (NU)=True 
2024-01-18 11:52:05,848 DEBUG: enoceanmqtt/cover/bad/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:52:05.840597", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:52:05,848 DEBUG: Sending PUBLISH (d0, q0, r1, m749), 'b'enoceanmqtt/cover/bad/f6'', ... (139 bytes)
2024-01-18 11:52:05,944 DEBUG: FF:83:EB:84->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x84', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:52:05,947 DEBUG: enoceanmqtt/cover/kuechegarten/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:52:05,948 DEBUG: enoceanmqtt/cover/kuechegarten/f6: EB (Energy bow)=released 
2024-01-18 11:52:05,949 DEBUG: enoceanmqtt/cover/kuechegarten/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:52:05,949 DEBUG: enoceanmqtt/cover/kuechegarten/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:52:05,949 DEBUG: enoceanmqtt/cover/kuechegarten/f6: T21 (T21)=True 
2024-01-18 11:52:05,950 DEBUG: enoceanmqtt/cover/kuechegarten/f6: NU (NU)=True 
2024-01-18 11:52:05,951 DEBUG: enoceanmqtt/cover/kuechegarten/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:52:05.944256", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:52:05,951 DEBUG: Sending PUBLISH (d0, q0, r1, m750), 'b'enoceanmqtt/cover/kuechegarten/f6'', ... (139 bytes)
2024-01-18 11:52:06,260 DEBUG: FF:83:EB:8A->FF:FF:FF:FF (-65 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x8a', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x41', '0x0'] OrderedDict()
2024-01-18 11:52:06,263 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:52:06,264 DEBUG: enoceanmqtt/cover/kuechelinks/f6: EB (Energy bow)=released 
2024-01-18 11:52:06,265 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:52:06,266 DEBUG: enoceanmqtt/cover/kuechelinks/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:52:06,267 DEBUG: enoceanmqtt/cover/kuechelinks/f6: T21 (T21)=True 
2024-01-18 11:52:06,267 DEBUG: enoceanmqtt/cover/kuechelinks/f6: NU (NU)=True 
2024-01-18 11:52:06,268 DEBUG: enoceanmqtt/cover/kuechelinks/f6: Sent MQTT: {"_RSSI_": -65, "_DATE_": "2024-01-18T11:52:06.260522", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:52:06,269 DEBUG: Sending PUBLISH (d0, q0, r1, m751), 'b'enoceanmqtt/cover/kuechelinks/f6'', ... (139 bytes)
2024-01-18 11:52:06,336 DEBUG: FF:83:EB:8C->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x8c', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:52:06,336 DEBUG: enoceanmqtt/cover/wc/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:52:06,336 DEBUG: enoceanmqtt/cover/wc/f6: EB (Energy bow)=released 
2024-01-18 11:52:06,336 DEBUG: enoceanmqtt/cover/wc/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:52:06,336 DEBUG: enoceanmqtt/cover/wc/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:52:06,336 DEBUG: enoceanmqtt/cover/wc/f6: T21 (T21)=True 
2024-01-18 11:52:06,336 DEBUG: enoceanmqtt/cover/wc/f6: NU (NU)=True 
2024-01-18 11:52:06,337 DEBUG: enoceanmqtt/cover/wc/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:52:06.336203", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:52:06,337 DEBUG: Sending PUBLISH (d0, q0, r1, m752), 'b'enoceanmqtt/cover/wc/f6'', ... (139 bytes)
2024-01-18 11:52:06,400 DEBUG: FF:83:EB:8D->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x8d', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:52:06,400 DEBUG: enoceanmqtt/cover/zimmersarah/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:52:06,400 DEBUG: enoceanmqtt/cover/zimmersarah/f6: EB (Energy bow)=released 
2024-01-18 11:52:06,400 DEBUG: enoceanmqtt/cover/zimmersarah/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:52:06,400 DEBUG: enoceanmqtt/cover/zimmersarah/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:52:06,400 DEBUG: enoceanmqtt/cover/zimmersarah/f6: T21 (T21)=True 
2024-01-18 11:52:06,400 DEBUG: enoceanmqtt/cover/zimmersarah/f6: NU (NU)=True 
2024-01-18 11:52:06,400 DEBUG: enoceanmqtt/cover/zimmersarah/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:52:06.400014", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:52:06,400 DEBUG: Sending PUBLISH (d0, q0, r1, m753), 'b'enoceanmqtt/cover/zimmersarah/f6'', ... (139 bytes)
2024-01-18 11:52:06,501 DEBUG: FF:83:EB:8E->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x1', '0xff', '0x83', '0xeb', '0x8e', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:52:06,501 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R1 (Rocker 1st action)=Button AI 
2024-01-18 11:52:06,501 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: EB (Energy bow)=released 
2024-01-18 11:52:06,501 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:52:06,501 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: SA (2nd action)=2nd action valid 
2024-01-18 11:52:06,501 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: T21 (T21)=True 
2024-01-18 11:52:06,502 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: NU (NU)=True 
2024-01-18 11:52:06,502 DEBUG: enoceanmqtt/cover/zimmerfabi/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:52:06.501268", "_RAW_DATA_": "01:30", "R1": 0, "EB": 0, "R2": 0, "SA": 1, "T21": true, "NU": true}
2024-01-18 11:52:06,502 DEBUG: Sending PUBLISH (d0, q0, r1, m754), 'b'enoceanmqtt/cover/zimmerfabi/f6'', ... (139 bytes)
2024-01-18 11:52:07,270 DEBUG: FF:83:EB:82->FF:FF:FF:FF (-67 dBm): 0x01 ['0xa5', '0x0', '0xd', '0x1', '0xa', '0xff', '0x83', '0xeb', '0x82', '0x20'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:52:07,272 DEBUG: enoceanmqtt/cover/bad/a5: DB3 (Data Byte 3)=0.0 
2024-01-18 11:52:07,272 DEBUG: enoceanmqtt/cover/bad/a5: DB2 (Data Byte 2)=13.0 
2024-01-18 11:52:07,272 DEBUG: enoceanmqtt/cover/bad/a5: DB1 (Data Byte 1)=1.0 
2024-01-18 11:52:07,272 DEBUG: enoceanmqtt/cover/bad/a5: DB0 (Data Byte 0)=10.0 
2024-01-18 11:52:07,272 DEBUG: enoceanmqtt/cover/bad/a5: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:52:07.270348", "_RAW_DATA_": "00:0D:01:0A:20", "DB3": 0.0, "DB2": 13.0, "DB1": 1.0, "DB0": 10.0}
2024-01-18 11:52:07,272 DEBUG: Sending PUBLISH (d0, q0, r1, m755), 'b'enoceanmqtt/cover/bad/a5'', ... (137 bytes)
2024-01-18 11:52:07,795 DEBUG: FF:83:EB:8C->FF:FF:FF:FF (-67 dBm): 0x01 ['0xa5', '0x0', '0x11', '0x1', '0xa', '0xff', '0x83', '0xeb', '0x8c', '0x20'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict()
2024-01-18 11:52:07,795 DEBUG: enoceanmqtt/cover/wc/a5: DB3 (Data Byte 3)=0.0 
2024-01-18 11:52:07,795 DEBUG: enoceanmqtt/cover/wc/a5: DB2 (Data Byte 2)=17.0 
2024-01-18 11:52:07,795 DEBUG: enoceanmqtt/cover/wc/a5: DB1 (Data Byte 1)=1.0 
2024-01-18 11:52:07,795 DEBUG: enoceanmqtt/cover/wc/a5: DB0 (Data Byte 0)=10.0 
2024-01-18 11:52:07,795 DEBUG: enoceanmqtt/cover/wc/a5: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:52:07.794978", "_RAW_DATA_": "00:11:01:0A:20", "DB3": 0.0, "DB2": 17.0, "DB1": 1.0, "DB0": 10.0}
2024-01-18 11:52:07,796 DEBUG: Sending PUBLISH (d0, q0, r1, m756), 'b'enoceanmqtt/cover/wc/a5'', ... (137 bytes)
2024-01-18 11:52:36,262 DEBUG: FF:83:EB:84->FF:FF:FF:FF (-65 dBm): 0x01 ['0xf6', '0x70', '0xff', '0x83', '0xeb', '0x84', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x41', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button BO', 'raw_value': 3}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:52:36,263 DEBUG: enoceanmqtt/cover/kuechegarten/f6: R1 (Rocker 1st action)=Button BO 
2024-01-18 11:52:36,263 DEBUG: enoceanmqtt/cover/kuechegarten/f6: EB (Energy bow)=pressed 
2024-01-18 11:52:36,263 DEBUG: enoceanmqtt/cover/kuechegarten/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:52:36,263 DEBUG: enoceanmqtt/cover/kuechegarten/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:52:36,263 DEBUG: enoceanmqtt/cover/kuechegarten/f6: T21 (T21)=True 
2024-01-18 11:52:36,263 DEBUG: enoceanmqtt/cover/kuechegarten/f6: NU (NU)=True 
2024-01-18 11:52:36,263 DEBUG: enoceanmqtt/cover/kuechegarten/f6: Sent MQTT: {"_RSSI_": -65, "_DATE_": "2024-01-18T11:52:36.262659", "_RAW_DATA_": "70:30", "R1": 3, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:52:36,263 DEBUG: Sending PUBLISH (d0, q0, r1, m757), 'b'enoceanmqtt/cover/kuechegarten/f6'', ... (139 bytes)
2024-01-18 11:52:36,582 DEBUG: FF:83:EB:8A->FF:FF:FF:FF (-67 dBm): 0x01 ['0xf6', '0x70', '0xff', '0x83', '0xeb', '0x8a', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x43', '0x0'] OrderedDict([('R1', {'description': 'Rocker 1st action', 'unit': '', 'value': 'Button BO', 'raw_value': 3}), ('EB', {'description': 'Energy bow', 'unit': '', 'value': 'pressed', 'raw_value': 1}), ('R2', {'description': 'Rocker 2nd action', 'unit': '', 'value': 'Button AI', 'raw_value': 0}), ('SA', {'description': '2nd action', 'unit': '', 'value': 'No 2nd action', 'raw_value': 0}), ('T21', {'description': 'T21', 'unit': '', 'value': True, 'raw_value': 1}), ('NU', {'description': 'NU', 'unit': '', 'value': True, 'raw_value': 1})])
2024-01-18 11:52:36,582 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R1 (Rocker 1st action)=Button BO 
2024-01-18 11:52:36,582 DEBUG: enoceanmqtt/cover/kuechelinks/f6: EB (Energy bow)=pressed 
2024-01-18 11:52:36,582 DEBUG: enoceanmqtt/cover/kuechelinks/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-18 11:52:36,582 DEBUG: enoceanmqtt/cover/kuechelinks/f6: SA (2nd action)=No 2nd action 
2024-01-18 11:52:36,583 DEBUG: enoceanmqtt/cover/kuechelinks/f6: T21 (T21)=True 
2024-01-18 11:52:36,583 DEBUG: enoceanmqtt/cover/kuechelinks/f6: NU (NU)=True 
2024-01-18 11:52:36,583 DEBUG: enoceanmqtt/cover/kuechelinks/f6: Sent MQTT: {"_RSSI_": -67, "_DATE_": "2024-01-18T11:52:36.582198", "_RAW_DATA_": "70:30", "R1": 3, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-18 11:52:36,583 DEBUG: Sending PUBLISH (d0, q0, r1, m758), 'b'enoceanmqtt/cover/kuechelinks/f6'', ... (139 bytes)
2024-01-18 11:52:58,606 DEBUG: Sending PINGREQ
2024-01-18 11:52:58,606 DEBUG: Received PINGRESP

Result:
Only some covers are open (not the same as last time, seems random)

Like always: Feel free to ask if some more tests can help

And thanks a lot!

PS: Will now try a delay in the automation

mak-gitdev Jan 18, 2024
Maintainer Author

@fabi9163,

Thanks for the log (I reformatted your answer to add collapsible sections for the logs.

At first glance, I can't see any performance issue from enoceanmqtt.
All the 10 telegrams are correctly sent.
Unless your logs are incomplete, I can also see that on the receiving end, some covers didn't reply so their status can't be updated in HA.
These covers might not have received their telegrams for yet unknown reasons.
I will later have a closer look but I am quite confident that adding a delay will solve your issue 🤞

fabi9163 Jan 22, 2024

(Thanks for reformatting, much better)
Your thoughts seems to be right. After adding 1 sec delay between every command everything works.
I think it's the same like pressing two buttons the same time -> nothing happens
(in my opinion a very bad system to handle, but I think there is not enought energy in the button to handle error handling)

Hidden tests - @fabi9163 #1

Uh oh!

Uh oh!

mak-gitdev Dec 1, 2023 Maintainer

Replies: 5 comments · 64 replies

Uh oh!

mak-gitdev Dec 3, 2023 Maintainer Author

Uh oh!

Uh oh!

Uh oh!

mak-gitdev Dec 3, 2023 Maintainer Author

Uh oh!

mak-gitdev Dec 4, 2023 Maintainer Author

Uh oh!

Uh oh!

Uh oh!

Uh oh!

mak-gitdev Dec 6, 2023 Maintainer Author

Uh oh!

Uh oh!

mak-gitdev Dec 6, 2023 Maintainer Author

Uh oh!

Uh oh!

mak-gitdev Dec 6, 2023 Maintainer Author

Uh oh!

mak-gitdev Dec 7, 2023 Maintainer Author

Uh oh!

Uh oh!

Uh oh!

mak-gitdev Dec 7, 2023 Maintainer Author

Uh oh!

Uh oh!

mak-gitdev Dec 11, 2023 Maintainer Author

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

mak-gitdev Dec 18, 2023 Maintainer Author

Uh oh!

Uh oh!

mak-gitdev Dec 18, 2023 Maintainer Author

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

mak-gitdev
Dec 1, 2023
Maintainer

Replies: 5 comments 64 replies

mak-gitdev
Dec 3, 2023
Maintainer Author

mak-gitdev Dec 3, 2023
Maintainer Author

mak-gitdev Dec 4, 2023
Maintainer Author

mak-gitdev Dec 6, 2023
Maintainer Author

mak-gitdev Dec 6, 2023
Maintainer Author

mak-gitdev Dec 6, 2023
Maintainer Author

mak-gitdev Dec 7, 2023
Maintainer Author

mak-gitdev Dec 7, 2023
Maintainer Author

mak-gitdev Dec 11, 2023
Maintainer Author

mak-gitdev
Dec 18, 2023
Maintainer Author

mak-gitdev Dec 18, 2023
Maintainer Author