Any way to access repeater CLI for rebooting? send_login does not work from meshcore.execute_command

[aredon]

In an attempt to manage the level of advert traffic on the network I was hoping to schedule a one-time reboot of my repeaters as that is one way to establish the advert time and I would prefer not to stay up until 3am.

To that end I was trying to set up a pretty simple home assistant script to send_login (which fails with nonetype, and if you run it from the helper:

Error executing command send_login: 'MeshCoreDataUpdateCoordinator' object has no attribute 'set_command_result'

Is there a way to do this that I am missing?

[awolden]

The set_command_result error is a bug in v2.5.0, tracked in #197 — fix is coming shortly.

Once that lands, what you want to do is totally possible. You need to login first, then send the reboot command to the remote node via send_cmd:

alias: Scheduled Repeater Reboot
trigger:
  - platform: time
    at: "03:00:00"
action:
  - action: meshcore.execute_command
    data:
      command: 'send_login "RepeaterName" "your_admin_password"'
  - delay:
      seconds: 10
  - action: meshcore.execute_command
    data:
      command: 'send_cmd "RepeaterName" "reboot"'

The delay gives the login time to round-trip through the mesh. Note that a bare reboot only reboots your local companion — send_cmd is what sends it to the remote repeater.

More on available commands in the services docs.

[aredon]

I will try this tomorrow. Thank you sir this is going to help a lot.