ec2adapters mode

[xoyteam]

debugger:

sudo ec3adapters
List of Silicon Labs USB debug adapters found:
port Device Manufacturer Friendly Name
USB:EC3001C9174 USB Debug Adapter Silicon Laboratories EC3 debugger

device: C8051F800

question:

if i run command
sudo ec2device --port USB

---

• WARNING: Auto detection of mode may cause initialisation sequence *
• to differ significantly from the SiLabs IDE. *
• In the case of problems specify --mode=C2 or --mode=JTAG *

  ---

Warning: this version is newer than the versions tested by the developers,
Please report success / failure and version via ec2drv.sf.net
Currently tested versions from 0x07 to 0x14
NOT C2, Trying JTAG
Debug adaptor ver = 0x23
ERROR: target would not stop after halt!
ERROR: target would not stop after halt!
^Cexiting now
^Cec2device:ec2drv.c:1986:
usb_interrupt_write in write_usb returned -19 : No such device

Error. debugger freezes. but if i run sudo ec2device --port USB --mode=C2 all working normaly. mode JTAG not work too.

Warning: this version is newer than the versions tested by the developers,
Please report success / failure and version via ec2drv.sf.net
Currently tested versions from 0x07 to 0x14
FOUND:

device : C8051F800
mode : JTAG
Flash size = 16384 bytes
Internal xram size = 0 bytes
External bus = No
Single lock addr = 0x3dff
Flash sector size = 512 bytes
Flash reserved top = 0xffffffff
Flash reserved bottom = 0x3e00
Has Scratchpad = No
Has paged SFR = No
USB FIFO size = 0 bytes

Tested = No

Support for this device has not been fully tested or may not be complete
You can be of assistance, please visit:
http://sourceforge.net/tracker/?atid=775284&group_id=149627&func=browse
Please feel free to report your succcess / failure.
If there are any issues we can probably resolve them with your help since we don't have boards for every supported processor.
exiting now
disconnect done