Input shaper value

[Chef-Armstrong]

Hi,
I was wondering if its possible to change a users input shaper values simple af gives by default basically what I propose is as follows

[resonance_tester]
accel_chip: adxl345
accel_per_hz: 100
probe_points:
(*****)
min_freq: 25
max_freq: 135
sweeping_accel: 450
sweeping_period: 2.5

So what this does is increase default accell_per_hz from 75 to 100 meaning vibration intensity is slightly higher but not by much, it also changes default sweeping behaviour to allow for longer sweeping period in theory this allows for way more accurate results when running the input shaper.

A few users of saf have already done similar changes and its worked giving them either same results or slightly better maybe odd time slightly worse.

Would this be something that you would be interesting in adding, I dont mind looking to do the necessary work to implement it, the changes i have made are safe and work on k1 and k1m it would just need to be implemented somehow.

[pellcorp]

I would need to understand why this is an advantage before I would do anything here. I'm not a fan of changing the default behaviour without understanding why its a benfit.

[pellcorp]

Users can make this change themselves in printer.cfg and the settings would be retained across updates, I kind of thing that might be sufficient unless I am clearly show its an advantage.

[Chef-Armstrong]

its mostly just sweeping_period: 2.5 this makes it do the sweeping over more of the bed, this gives the advantage of taking a bigger reading of the resonance of the bed, if I'm correct Bambu also do it like this

[pellcorp]

I've considered it, Im not going to do it, but if you can find a place to put it in the various wiki pages I will consider merging it to creality-wiki, I even tried it on my own machines and I am not convinced it makes any difference.