Skip to content
This repository was archived by the owner on Mar 2, 2024. It is now read-only.

Material-sources-database.md

Latest commit

 

History

History
136 lines (103 loc) · 4.53 KB

Material-sources-database.md

File metadata and controls

136 lines (103 loc) · 4.53 KB
title layout author date
Material Sources Database
doc

Laser Cutter

  • Full Spectrum Laser SN 07/11/8350-639

Airfilter

Kapton Film

Used for solder stencils, sort of not as good as paper.

  • Vendor: Kapton Source http://Kaptonsource.com/ (This vendor has died.)
    • 3 Mil by 12" by 36 yard roll
    • PC533FILM-12000-36
    • $315.00 + shipping

Bamboo

  • Vendor: Revolution Bamboo http://bamboorevolution.com/
    • 1300 SE Grand Ave, Portland, OR, (503) 914-6262
  • Order full sheets of 4' x 8' cut to a 4x6 array of around 12 x 16 inches
  • 1/8 inch
  • 1/4 inch

Acrylic

Port Plastics (our preferred source)

  • Contact
    • Jim at 503-684-9335
    • 7500 SW Tech Center Drive #100, Portland, OR 97223
  • Quote (9/5/12)
    • 1 full 4' x 8' sheet cut to a 4x6 array of 12 x 16 inches
    • 1/8" $2.80 / piece (3 mm?)
    • 3/16" $4.32 / piece
    • 1/4" $6.32 / piece
    • 3/8" $9.04 / piece (have a free supply, pretty thick, don't really need)
    • 1/2" $13.52 / piece (Pretty thick, don't really need)

Multicraft

  • 503-352-0970
  • 7298 SW Tech Center Drive, Tigard, OR 97223-8046

Laird

  • Manager: Lee Ramsby
  • 503-233-4861
  • 2718 SE Raymond St, Portland, OR 97202

Tap Plastics

  • Portland
    • 503-230-0770
    • 2842 NE Sandy Blvd, Portland, OR 97232
  • Tigard
    • 503-620-4960
    • 15230 SW Sequoia Pkwy, Tigard, OR 97224

Gravoply Laser

  • This is layered plastic that's good for name plates (black covering white plastic)
  • http://www.gravostore.com/
  • Approx $12 for a 12" x 24" sheet
  • Minimum orders required, about $35

3D Printer

We order everything directly from Mojo at http://shop.stratasys.com/

  • Modeling material: "P430 Model Print Engine (ivory color in ABSplus)" # 350-80100, $399 for 80 cubic inches (1,311 cc)
  • Support material: SR-30 Soluble Support Print Engine # 350-80200, $399 for 80 cubic inches (1,311 cc)
  • Printing plates: "Modeling Bases" # 350-10000, $70 for 24 bases from
  • Cleaning Tablets: Ecoworks Tablets #300-00104, $110 for 24 tablets

We can also recycle packs for free: https://www.stratasys.com/recycling/recycling-instructions {% comment %} It's unclear whether they still offer free recycling for 3rd party material. Here's the old broken link: http://www.stratasys.com/Help/Recycle/Recycle-UPS.aspx {% endcomment %}

PCB Router

PCB stock ("bare boards")

  • EBay
    • PCB Depot
    • Unlike other PCB stock stores on EBay, these guys have a pull-down selection for different options, rather than having to wade through multiple listings.
    • Good prices
    • Standard or custom sizes
    • Mostly 1-oz double sided and 1 or 2-oz single-sided
    • Thicknesses from 0.005" to 0.062"
    • Recommendation for ordering:
  • Think & Tinker LTD
    • 1/2 oz or 1 oz Double Sided 1/16" (0.062"), 5 pieces, 9x12": $59.37
  • Electronix Express
    • 1 oz Double Sided 1/16" (0.062"), $7.70/ea. when 10+ are ordered.
    • Most IEEE store parts are ordered from here so shipping is negligible.

LPKF S63

Laser Printer

HP LaserJet CM1415fnw

  • Cyan toner cartridge: CE321A
  • Magenta toner cartridge: CE323A
  • Yellow toner cartridge: CE322A
  • Black toner cartridge: CE320A

Soldering Station

  • Thin solder wick: ITW Chemtronics 10ft of SOLDER-WICK NO-CLEAN .030" # 60-1-10 (DK 60-1-10-ND)
  • Wide solder wick: ITW Chemtronics 10ft of SOLDER-WICK NO-CLEAN .110" # 60-4-10 (DK 60-4-10-ND)
  • Flux pen: Kester Solder Formula 951 No Clean # 83-1000-0951 (DK KE1804-ND)
  • Aggressive flux pen: MG Chemicals PEN RA ROSIN FLUX .34OZ W/TIP 835-P (DK 473-1033-ND)
  • Solder: Kester SOLDER NO-CLEAN 28AWG 63/37 1LB #24-6337-8806 (DK KE1405-ND)