i dont know how to use it

[FnafFan12]

pls help me i dont know how to open it and when i try teh command it say that it doesn't exist

[Dragoonlord82]

Which operating system do you use? Have you already compiled it?

[FnafFan12]

i have windows 10 i don't know how to compile it

[Dragoonlord82]

Here I have the latest version compiled for you. To use via command line or via batch file. If you need more help, just write. But give a few more info where you have problems. Best regards

Dragoonlord82
editor.zip

[FnafFan12]

can you make it for windows 7 pls?

[Dragoonlord82]

The .exe file I have given you, works with all Windows versions from XP upwards. All you have to do is unzip the ZIP file, save it to any folder, and use the Editor.exe with the command line or a batch file. The only thing I can do for you is to write a little example batch.

Edit:
Write this into a text file and save it in the same folder as the editor.exe. Then rename example.TXT to example.CMD.
Double-click the batch file

Edit2:
Minor bug, * .bin changed to * .dmp.
sorry for my mistake

:Start
cls
@echo off
echo [1] figure info
echo [2] backup info
echo [3] read from Portal
echo [4] write to Portal
echo [5] all to maximum
echo [6] left skills
echo [7] right skills
echo [8] max money
echo [9] max experience
echo [10] Exit
echo.
set asw=
set /p asw="Please enter selection:"

if "%asw%"=="10" exit
if "%asw%"=="9" goto experience
if "%asw%"=="8" goto money
if "%asw%"=="7" goto right
if "%asw%"=="6" goto left
if "%asw%"=="5" goto allmax
if "%asw%"=="4" goto write
if "%asw%"=="3" goto read
if "%asw%"=="2" goto backup
if "%asw%"=="1" goto figure
if "%asw%" GTR "10" goto Start
if "%asw%" LSS "1" goto Start

:figure
cls
editor -p -D
pause
goto Start

:backup
cls
set Name=
set /p Name=Enter the name of the backup:
if not exist "%Name%".dmp goto Start
editor -i "%Name%".dmp -D
pause
goto Start

:read
cls
editor -p -a
pause
goto Start

:write
cls
set Name=
set /p Name=Enter the name of the backup:
if not exist "%Name%".dmp goto Start
editor -i "%Name%".dmp -P
pause
goto Start

:allmax
cls
set Name=
set /p Name=Enter the name of the backup:
if not exist "%Name%".dmp goto start
editor -i "%Name%".dmp -o "%Name%".dmp -M 65535 -X 16777215 -H 64 -C 4294967295 -c
pause
goto Start

:left
cls
set Name=
set /p Name=Enter the name of the backup:
if not exist "%Name%".dmp goto start
editor -i "%Name%".dmp -o "%Name%".dmp -L 65535 -c
pause
goto Start

:right
cls
set Name=
set /p Name=Enter the name of the backup:
if not exist "%Name%".dmp goto start
editor -i "%Name%".dmp -o "%Name%".dmp -R 65535 -c
pause
goto Start

:money
cls
set Name=
set /p Name=Enter the name of the backup:
if not exist "%Name%".dmp goto start
editor -i "%Name%".dmp -o "%Name%".dmp -M 65535 -c
pause
goto start

:experience
cls
set Name=
set /p Name=Enter the name of the backup:
if not exist "%Name%".dmp goto start
editor -i "%Name%".dmp -o "%Name%".dmp -X 16777215 -c
pause
goto start

[FnafFan12]

is that normal that it doesn't make nothing and that block on this

[Dragoonlord82]

Of course there is no guarantee that everything works right away. But fundamentally everything should work, I wrote you the batch so that you generally have a function. But before you can make any changes to a Skylander, you have to make a backup. The changes you then take on the just made backup. Then the edited or saved backup must be written back to the SAME Skylander. You can not go from Skylander A to B, but only from A to A, and so on. It may also be on the portal, so if something does not work, try a different portal, if possible. XBOX portals do not work! You'll have to try a little, and if necessary adjust the batch a bit. If you do not need further help, tell me exactly what you did and what does not work. But first you have everything you need. best regards Dragoonlord82

[FnafFan12]

and how do i make a backup with the batch file?

[Dragoonlord82]

So with 1 you get displayed which figure is on the portal.
With 2 you get information about an existing backup.
with 3 you do a backup.
with 4 you write back the backup back to the figure from which it was made.
The rest explains itself, I think.
But I have found a mistake on my part, you have to replace in the batch .bin by .dmp. then I think everything is right. I'll change that in my post.

Edit:
I hope I could help you so far now. With the change in the batch, everything should work, have just tested it myself, and it works. Sorry again for the small mistake.

[NefariousTechSupport]

Hi I’ve followed your instructions, @Dragoonlord82, and I’m having the same issue as @FnafFan12, as in the program stopping a “>>>PortalIO::Write”, could you help me, i've been using command 1

[ForceX70]

Hi I’ve followed your instructions, @Dragoonlord82, and I’m having the same issue as @FnafFan12, as in the program stopping a “>>>PortalIO::Write”, could you help me, i've been using command 1

I got the same problem as stated above. Any chance to help ?

Errormessage:

Reading Skylander

SkylanderIO::initWithPortal
SkylanderIO::ReadPortal
Found portal usb device
PortalIO::Write

running on Win10 64bit

[brimstone326]

Hello,

I have been trying this and it either tells me the name is no good, or it appears to run, but saves no file out.

I tried to run the editor from cmd instead of using the batch, but I'll be the first to admit I may be doing something wrong.

I even tried creating an empty thappy.bin and thappy.dmp file to leave in the folder for it to write to.

With the batch, I have a figure on the portal and type '2'
I entered 'thappy'

It returns 'reading skylander'
'invalid sklander file'
'press any key to continue'

I tried again using 'trigger happy' and it appears to run and sends me back to the main list, but no file is saved anywhere I can find.

Do the *.dmp names have to be exactly correct to the toy list?

Should I be able to run the editor from CMD directly instead of using the batch file? When I try, it flashes for a moment and closes out, even if running as admin.

Any help is appreciated. I feel like it's trying to work, but not quite sure what I need to do if it cares what I type in and doesn't save the file out when it likes the name I give it.

Thanks

[silicontrip]

From my understanding of the batch file, Option 2 will simply read a file off the disk and display it in the terminal window.
Option 3 will read the Skylander from the portal and save it into a temporary file. (called "TEMP") Rename this file to "name.dmp" name being something memorable like the skylanders name.

[brimstone326]

Thanks for responding.

I don't suppose it could have been compiled incorrectly. That's a bit out of my scope of knowledge unfortunately. I just couldn't get it to save any file out. I'll try option 3.

Should I be able to use the editor without a batch file? It blinks in and out of existence even in admin mode. I wasn't sure if it should do that or not.

[silicontrip]

I can't speak for the binary, but yes you can use the editor without the batch file. There are examples on the main page.