Initial expectation based SPI test helper

Author: jmhobbs

max6675/max6675.go

@@ -3,22 +3,23 @@ package max6675
 
 import (
 	"errors"
-	"machine"
+
+	"tinygo.org/x/drivers"
 )
 
 // ErrThermocoupleOpen is returned when the thermocouple input is open.
 // i.e. not attached  or faulty
 var ErrThermocoupleOpen = errors.New("thermocouple input open")
 
 type Device struct {
-	bus machine.SPI
-	cs  machine.Pin
+	bus drivers.SPI
+	cs  drivers.Pin
 }
 
 // Create a new Device to read from a MAX6675 thermocouple.
 // Pins must be configured before use.  Frequency for SPI
 // should be 4.3MHz maximum.
-func NewDevice(bus machine.SPI, cs machine.Pin) *Device {
+func NewDevice(bus drivers.SPI, cs drivers.Pin) *Device {
 	return &Device{
 		bus: bus,
 		cs:  cs,

max6675/max6675_test.go

@@ -0,0 +1,45 @@
+package max6675_test
+
+import (
+	"testing"
+
+	qt "github.com/frankban/quicktest"
+	"tinygo.org/x/drivers/max6675"
+	"tinygo.org/x/drivers/tester"
+)
+
+func Test_MAX6675_Read(t *testing.T) {
+	c := qt.New(t)
+	spi := tester.NewSPIBus(c)
+
+	var expectedCelsius float32 = 20.25
+
+	temp := uint16(expectedCelsius/0.25) << 3
+
+	spi.Expect(
+		[]byte{0, 0},
+		[]byte{byte(temp >> 8), byte(temp)},
+	)
+
+	dev := max6675.NewDevice(spi, tester.NewNoopPin())
+
+	actual, err := dev.Read()
+	c.Assert(err, qt.Equals, nil)
+	c.Assert(actual, qt.Equals, expectedCelsius)
+}
+
+func Test_MAX6675_Read_ErrThermocoupleOpen(t *testing.T) {
+	c := qt.New(t)
+	spi := tester.NewSPIBus(c)
+
+	spi.Expect(
+		[]byte{0, 0},
+		[]byte{0, 0x04},
+	)
+
+	dev := max6675.NewDevice(spi, tester.NewNoopPin())
+
+	actual, err := dev.Read()
+	c.Assert(err, qt.Equals, max6675.ErrThermocoupleOpen)
+	c.Assert(actual, qt.Equals, float32(0))
+}

pin.go

@@ -0,0 +1,12 @@
+package drivers
+
+type Pin interface {
+	//  Configure(config PinConfig)
+	Get() bool
+	High()
+	Low()
+	//PortMaskClear() (*uint32, uint32)
+	// PortMaskSet() (*uint32, uint32)
+	Set(high bool)
+	// SetInterrupt(change PinChange, callback func(Pin)) error
+}

tester/pin.go

@@ -0,0 +1,12 @@
+package tester
+
+type NoopPin struct{}
+
+func NewNoopPin() *NoopPin {
+	return &NoopPin{}
+}
+
+func (n *NoopPin) Get() bool     { return true }
+func (n *NoopPin) High()         {}
+func (n *NoopPin) Low()          {}
+func (n *NoopPin) Set(high bool) {}

tester/spi.go

@@ -0,0 +1,56 @@
+package tester
+
+import (
+	"bytes"
+)
+
+type spiExpectation struct {
+	write []byte
+	read  []byte
+}
+
+type SPIBus struct {
+	c            Failer
+	expectations []spiExpectation
+}
+
+func NewSPIBus(c Failer) *SPIBus {
+	return &SPIBus{
+		c:            c,
+		expectations: []spiExpectation{},
+	}
+}
+
+func (s *SPIBus) Tx(w, r []byte) error {
+	if len(s.expectations) == 0 {
+		s.c.Fatalf("unexpected SPI exchange")
+	}
+	ex := s.expectations[0]
+	if !bytes.Equal(ex.write, w) {
+		s.c.Fatalf("unexpected SPI write: got %#v, expecting %#v", w, ex.write)
+	}
+	copy(r, ex.read)
+	s.expectations = s.expectations[1:]
+	return nil
+}
+
+func (s *SPIBus) Transfer(b byte) (byte, error) {
+	buf := make([]byte, 1)
+	err := s.Tx([]byte{b}, buf)
+	return buf[0], err
+}
+
+func (s *SPIBus) Expect(in []byte, out []byte) {
+	if len(in) != len(out) {
+		s.c.Fatalf("Expect: input and output slices must be the same length")
+	}
+	s.expectations = append(s.expectations, spiExpectation{in, out})
+}
+
+type Pin struct {
+	c Failer
+}
+
+func NewPin(c Failer) *Pin {
+	return &Pin{c}
+}