Pseudocode Task

client-a.txt

@@ -1,4 +1,18 @@
 # Client Task A #
 # Add your pseudocode to this file below this line: #
 # ------------------------------------------------- #
+1. Create number scale valued from 1-10
+    prompt user to select a number between value 1-10
+        alert user that they have three chances to select the correct number
+2. User selects number from the above scale in Step 1
+    computer randomly generates a number from the above scale
+3. Check if the user selected number is the same as the randomly generated number
+    If the number is correct
+        print "You win the grand prize" and exit game
+    else print "please try again"
+4. Prompt user to select a new number between 1-10
+    repeat step 3 until user has made 3 different guesses
+    if user does not select the correct number
+        print "Sorry, game is over. Goodbye" 
+        prompt user to choose option of "Play Again" or "Exit Game"
 

client-b.txt

@@ -2,3 +2,25 @@
 # Add your pseudocode to this file below this line: #
 # ------------------------------------------------- #
 
+Application has a gps map of the warehouse store 30x30 measured in ft. 
+    - the map supports the directions listed as: north, south, east, west
+    - the map supports directions to location desired by walking only
+
+1. User prompts application to display map of warehouse store
+    - user enables current location of device 
+        - this location is labled as "starting location"
+
+2. User selects desired location of store on the application
+    - this location is labeled as "ending location"
+
+3. Application displays directions from starting location to ending location 
+    - directions are listed in feet to ending location
+    - directions are specific to only as following: north, south, east, west
+
+4. User follows listed directions to target location 
+        - application updates current location in real time relative to ending location selected in Step 2
+
+5. Loop directions to ending location
+    - when user reaches the ending location
+        print "You have arrived" and exit user prompt in Step 1
+

client-c.txt

@@ -2,3 +2,16 @@
 # Add your pseudocode to this file below this line: #
 # ------------------------------------------------- #
 
+1. Create number scale for the program to scan values from 1-50
+    - scanner prints numbers in increments of 2 up to the maximum value of 50
+        - value of 50 reached is equal to 1 case
+
+2. Loop scanner to print +-2 until maximum value of 50 is reached
+    - when scanner is given the value of 50
+        print "One Case Filled"
+            count each case filled by increments of 1
+
+3. Repeat Step 2
+    - if scanner is unable to reach the maximum value of 50
+        - exit scanning Loop in Step 2
+            print "Out of packages to scan"