Input files

Example input files for various setups and campaigns

Coulex campaign 2018

This was with the old Marabou DAQ with med files. Data came from Mesytec ADCs for the CD and DGF for Miniball. The following settings file works for the Coulex campaign: settings_is553_2018.txt

And if you would like an example calibration file, you can have one here. It should work for most experiments in that campaign because very little was changed between the runs (IS644 - 94Kr, IS506 - 212Rn, IS552 - 222,224,226Rn and 222,228Ra, IS553 - 142Ba, IS562 - 106Sn): calibration_is553_2017.txt

And finally a reaction file showing how you might define the CD distance and rotation. You can also look a Pietro's paper on 222Rn to get the up to date CD distance and some other info about the setup that campaign: reaction_142Ba_208Pb.txt

Coulex campaign 2022

This was the first campaign using the new FEBEX DAQ, but with the GSI firmware and readout code. The file format was MBS with the .lmd extension. The experiments of interest were (IS702 - 130Sn, IS697 - 131Sb, IS563 - 182Hg). The settings file is here: settings_is563_2022.txt

Coulex campaign 2023

This now used the FEBEX digitisers and the Daresbury MIDAS DAQ and firmware. File format is RXX_YY, where XX is the run number and YY is the subrun. There is no file extension.

Part 1

The first part of the campaign should use this settings file. It is with the SPEDE chamber and concerns only IS563 (184Hg) and IS699 (185Hg), where ran back to back. settings_is699_2023.txt

Part 2

To be confirmed...