This is not finished! - currently working on it!

This is a FTP protocol that is partially (mostly) adheres to the CCSDS (Consultative Committee for Space Data Systems) spec for sending files into space CCSDS 727.0-B-4 (https://public.ccsds.org/pubs/727x0b4.pdf). This project is being built for a student lead space initiative at the Univerity of Alberta called ABsat.

The main difference this implementation offers that has deviates from the above
specifications is that this implementation offers a metadata nak (non acknowledgment).
This Nak lets the file sender user quickly resend a metadata packet if it was dropped. 
Since metadata packets are crucial to file management, and round trip times
can range to minutes or hours in space, I thought it prudent to handle
this edge case. Furthermore, this implementation will build a
'temporary file' if it has missed a metadata packet. This temporary file
will allow storage of data packets until a metadata packet is received,
allowing us to save minutes on data re-transmissions in the event a metadata
packet is missed.

Supported operation systems:

• Posix,
• FREE-RTOS

Supported network stacks:

• tcp
• udp
• csp (cube sate protocol)
• generic (other, including no network at all!)

Compilation Notes:

If you are compiling on Linux, it should compile posix compliant by default.

Compiling CSP:

first, one needs to build the .a file for your specific cpu architecture. instructions can be found here: https://github.com/libcsp/libcsp

archive file: Once one has the .a file by following the above instructions. simply link to it my adding the path to STATIC_FILES in our makefile: STATIC_FILES += /path/to/libcsp.a

.h files: We need to include the .h files to our include path. We can do this by linking the .h files to our INCLUDES in our makefile. INCLUDES += /path/to/libcsp/include

The last thing you need to do to let this app integrate seamlessly with csp, is to make sure that CSP_NETWORK is defined in port.h and csp_server_provider.c is uncommented in the makefile.

run make to compile!

Compiling with FreeRTOS:

The best way to compile with FreeRTOS is to do the same thing as we did with libscp -- create an .a file, and link to the .h files.

There are examples to help you with linking in the makefile.

Once again, make sure that FREE_RTOS_PORT is defined in port.h and that POSIX_PORT is not defined.

run make to compile!

Getting started:

init the app with:

FTP *app = init_ftp(my_cfdp_id);
if (app == NULL) {
    return 1;
}

this will spin up a thread in posix, or a task in FreeRTOS. if you want to join this thread, and it is a posix thread, you can run: ssp_thread_join(app->server_handle);

if you want to exit this task for any reason set app->close = 1; this will run the exiting subroutines and close the task if it is a FreeRTOS task.

if you wish to send a file to a peer:

params:
id of destination,
source file name,
name of the file as it will arrive at destination,
ACKNOWLEDGED_MODE/UN_ACKNOWLEDGED_MODE (ACKNOWLEDGED_MODE will allow for acks/naks to be sent.),
app

example:

Request *req = put_request(<destination id>, "pictures/src.jpg", "pictures/desination.jpg", ACKNOWLEDGED_MODE, app);
start_request(req);

if you wish to get a file from a peer, we need to add a 'message' onto a put request, we can specify that there is no associated put request if we set the filenames to NULL:

params:
id of destination,
source file name,
name of the file as it will arrive at destination,
ACKNOWLEDGED_MODE/UN_ACKNOWLEDGED_MODE (ACKNOWLEDGED_MODE will allow for acks/naks to be sent.),
app

example:

Request *req = put_request(<cfid of destination>, NULL, NULL, ACKNOWLEDGED_MODE, app);

add_proxy_message_to_request(<cfid of proxy destination>, , "source_file_name" "destination_file_name", req);

start_request(req);

hint, if you want to 'get' a file, set the to your id.

MIB (management information base)

This base holds the configuration information for users (peers or applications). This data is used for determining how and who we can send file or commands to. Files will not be sent to users that are not included in the MIB.

The MIB is currently configured as key value pairs. These pairs are formatted in the JSON format, the name of the file is peer_<cfid_id>.

Here is an example of a MIB entry:

{
"cfdp_id": 1,
"UT_address" : 2130706433,
"UT_port" : 1111,
"type_of_network" : 1,
"default_transmission_mode" : 1,
"MTU" : 1500,
"one_way_light_time" : 123,
"total_round_trip_allowance" : 123,
"async_NAK_interval" : 123,
"async_keep_alive_interval" : 123,
"async_report_interval" : 123,
"immediate_nak_mode_enabled" : 123,
"prompt_transmission_interval" : 123,
"disposition_of_incomplete" : 123,
"CRC_required" : 0,
"keep_alive_discrepancy_limit" : 8,
"positive_ack_timer_expiration_limit" : 123,
"nak_timer_expiration_limit" : 123,
"transaction_inactivity_limit" : 123
}

Below are the meanings of the fields for the MIB

• cfdp_id This is the unique identifier of a peer on the network. We can start it at 1 and increment it from there. This is an unsigned integer (32 bit) value;

• UT_address This is an Underlying Transmission address. For example, in an IP stack, this would be an IP4 Ip address. This value is a decimal representation of an IP address. This particular one is 127.0.0.1.

• UT_port This os an Underlying Transmission port. For example, in an IP stack, this would be a 16 bit value -- like port 8080. combined with the UT_address, together they form a complete UT address. The one above would be equal to 127.0.0.1:1111. This is an unsigned integer (16 bit) value

• type_of_network This number represents what type of network the underlying UT address takes. currently, the only acceptable values are 0 and 1.

  • 0: UDP
  • 1: TCP
  • 2: csp

• default_transmission_mode: not implemented

• MTU This number represents the 'maximum transmissible unit' -- this will also take the form of a buffer in the program. This value is the maximum size packet that the application will receive.

• one_way_light_time : not implemented

• total_round_trip_allowance : not implemented

• async_NAK_interval : not implemented

• async_keep_alive_interval : not implemented

• async_report_interval : not implemented

• immediate_nak_mode_enabled : not implemented

• prompt_transmission_interval : not implemented

• disposition_of_incomplete : not implemented

• CRC_required : not implemented

• keep_alive_discrepancy_limit : not implemented

• positive_ack_timer_expiration_limit : not implemented

• nak_timer_expiration_limit : not implemented

• transaction_inactivity_limit : not implemented

if you want to get in contact with me email me at evangiese77@gmail.com