Downloads
| Overview | System | Make circuit | Make case+strap | Wear | Use | Buying list | Downloads | RAM project |
|---|
For more details, please see page Use.
-
MOTIONER 1.1.01 for OSX (10.7+, 5MB, updated on 9 Feb 2015)
-
MOTIONER 1.1.01 for Windows (Windows 7+, 5.5MB, updated on 18 Feb 2015)
Windows needs Visual C++ Redistributable. If Visual studio 2012 is not installed your windows, please select your language and download x86 version & install it.
Basic motion data samples recorded by MOTIONER application.
For more details, please see Make IMU and Controller
- XBee Wi-Fi settings (For the controller)
- mbed binary (For the controller)
- Arduino sketch (Tests, calibration and firmware for the IMUs)
- MOTIONER calibration sketches
- Processing sketch (Calibration and visualization for the IMUs)
- Schematics(pdf)
- Eagle files (To make or order your own PCBs)
- Solder stencil mask (To make MOTIONER IMU)
- drawing of MOTIONER base (To make MOTIONER case)
MOTIONER_v1_1_0.zip (Mac OS 10.7+, Windows7+, 19.1MB)
you can find older releases of MOTIONER application & source codes stored at [other releases](other releases).
MOTIONER software by YCAM InterLab and Yoshito Onishi is licensed under the Apache License, Version2.0
Copyright 2012-2013 YCAMInterLab and Yoshito Onishi
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Copyright 2012-2013 YCAMInterLab and Yoshito Onishi
MOTIONER Arduino sketch and mbed code by YCAM InterLab and Yoshito Onishi are licensed under the GNU GPL(General Public License) v3.0.
MOTIONER hardware related documents (Schematics, Eagle files, Solder Stencil Mask, Drawing of MOTIONER base, MOTIONER pcb board, vacuum case and strap) by YCAM InterLab, Yoshito Onishi is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
