Add basic information of GPON ONT Nokia G-010G-D

_ont/ont-nokia-g-010g-d.md

@@ -0,0 +1,77 @@
+---
+title: Nokia G-010G-D
+has_children: false
+layout: default
+parent: Nokia
+---
+
+# Hardware Specifications
+
+|                  |                                                                              |
+| ---------------- | ---------------------------------------------------------------------------- |
+| Vendor/Brand     | Nokia                                                                        |
+| Model            | G-010G-D                                                                     |
+| Chipset          | RTL9607FS                                                                    |
+| Flash            | 256MB (SPI-NAND, Winbond 25N02KVZEIE)                                        |
+| RAM              | 512MB                                                                        |
+| System           | Linux (Realtek Unified SDK 2.2.0)                                            |
+| 2.5GBaseT        | Yes                                                                          |
+| Optics           | SC/APC                                                                       |
+| IP address       | 192.168.1.254                                                                |
+| Web Gui          | ✅ user `adminadmin`, password `ALC#FGU` (⚠️ only available when the PON connection IS NOT estabilished) |
+| SSH              | ✅ user `adminadmin`, password `ALC#FGU`, but has access to limited shell    |
+| Telnet           |                                                                              |
+| Serial           | ⚠️ (U-boot is password protected, Linux kernel disabled it after boot)       |
+| Serial baud      | 115200                                                                       |
+| Serial encoding  | 8-N-1                                                                        |
+| Form Factor      | ONT                                                                          |
+
+## List of software versions
+- 3TN00816JJLJ25 
+
+## List of partitions
+
+| dev  | name     |
+| ---- | -------- |
+| mtd0 | "boot"   |
+| mtd1 | "env"    |
+| mtd2 | "env2"   |
+| mtd3 | "RI"     |
+| mtd4 | "binfo"  |
+| mtd5 | "image0" |
+| mtd6 | "image1" |
+| mtd7 | "cfg"    |
+| mtd8 | "cfg_bak" |
+| mtd9 | "log"    |
+| mtd10 | "extfs" |
+| mtd11 | "mft_data" |
+
+## Serial
+
+The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. To accept TX line commands, the GND of the TTL adapter should be attached to the ONT’s shield.
+
+## Photos
+
+Front:
+
+{% include image.html file="g-010g-d_front.jpg"  alt="Nokia G-010G-D Front" caption="Nokia G-010G-D Front" %}
+
+
+Back:
+
+{% include image.html file="g-010g-d_back.jpg"  alt="Nokia G-010G-D Back" caption="Nokia G-010G-D Back" %}
+
+
+Front Internal:
+
+{% include image.html file="g-010g-d_internal_1.jpg"  alt="Nokia G-010G-D Internal front-face with TTL Pinout" caption="Nokia G-010G-D Internal front-face with TTL Pinout" %}
+
+Back Internal:
+
+{% include image.html file="g-010g-d_internal_2.jpg"  alt="Nokia G-010G-D Internal Back" caption="Nokia G-010G-D Internal Back" %}
+
+
+# Miscellaneous Links
+- [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser)  for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*)
+- [ispreview.co.uk](https://www.ispreview.co.uk/index.php/2022/09/pictured-openreachs-future-2-5gbps-ont-for-fttp-broadband.html)
+- [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser) for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*)

_ont/ont-technicolor-afm0003.md

@@ -116,6 +116,22 @@ The following commands are used to flash a new rootfs to image1 and then boot to
 ```sh
 # flash_eraseall /dev/mtd7
 # cat /tmp/rootfs.new > /dev/mtd7
+```
+
+If you get this error on `cat` command
+```sh
+# cat /tmp/rootfs.new > /dev/mtd7
+cat: write error: Invalid Argument
+```
+
+Use this proceudre instead to write firmware back to mtd:
+```sh
+# flash_eraseall /dev/mtd7
+# cat /tmp/rootfs.new > /dev/mtdblock7
+```
+
+Then make new firmware bootable
+```sh
 # nv setenv sw_version1 NEW_SOFTWARE_VERSION
 # nv setenv sw_commit 1
 # reboot