wifi: mt76: mt7996: support mt7996 2+3+3 variant by dangowrt · Pull Request #11 · nbd168/wireless

dangowrt · 2024-08-27T19:39:41Z

Add support for mt7996 tri-band 2+3+3 variant.
This setup is used for the BE14000 module sold by SinoVoip for the BananaPi R4 as well as Adtran SDG-8733A.
MediaTek yet has to release matching firmware files to the public.

Replaces openwrt/mt76#907

mt7915_band_config() sets band_idx = 1 on the main phy for mt7986 with MT7975_ONE_ADIE or MT7976_ONE_ADIE. Commit 0335c03 ("wifi: mt76: fix race condition related to checking tx queue fill status") introduced a dereference of the phys array indirectly indexed by band_idx via wcid->phy_idx in mt76_wcid_cleanup(). This caused the following Oops on affected mt7986 devices: Unable to handle kernel read from unreadable memory at virtual address 0000000000000024 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000042545000 [0000000000000024] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [nbd168#1] SMP Modules linked in: ... mt7915e mt76_connac_lib mt76 mac80211 cfg80211 ... CPU: 2 PID: 1631 Comm: hostapd Not tainted 5.15.150 #0 Hardware name: ZyXEL EX5700 (Telenor) (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mt76_wcid_cleanup+0x84/0x22c [mt76] lr : mt76_wcid_cleanup+0x64/0x22c [mt76] sp : ffffffc00a803700 x29: ffffffc00a803700 x28: ffffff80008f7300 x27: ffffff80003f3c00 x26: ffffff80000a7880 x25: ffffffc008c26e00 x24: 0000000000000001 x23: ffffffc000a68114 x22: 0000000000000000 x21: ffffff8004172cc8 x20: ffffffc00a803748 x19: ffffff8004152020 x18: 0000000000000000 x17: 00000000000017c0 x16: ffffffc008ef5000 x15: 0000000000000be0 x14: ffffff8004172e28 x13: ffffff8004172e28 x12: 0000000000000000 x11: 0000000000000000 x10: ffffff8004172e30 x9 : ffffff8004172e28 x8 : 0000000000000000 x7 : ffffff8004156020 x6 : 0000000000000000 x5 : 0000000000000031 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : ffffff80008f7300 x0 : 0000000000000024 Call trace: mt76_wcid_cleanup+0x84/0x22c [mt76] __mt76_sta_remove+0x70/0xbc [mt76] mt76_sta_state+0x8c/0x1a4 [mt76] mt7915_eeprom_get_power_delta+0x11e4/0x23a0 [mt7915e] drv_sta_state+0x144/0x274 [mac80211] sta_info_move_state+0x1cc/0x2a4 [mac80211] sta_set_sinfo+0xaf8/0xc24 [mac80211] sta_info_destroy_addr_bss+0x4c/0x6c [mac80211] ieee80211_color_change_finish+0x1c08/0x1e70 [mac80211] cfg80211_check_station_change+0x1360/0x4710 [cfg80211] genl_family_rcv_msg_doit+0xb4/0x110 genl_rcv_msg+0xd0/0x1bc netlink_rcv_skb+0x58/0x120 genl_rcv+0x34/0x50 netlink_unicast+0x1f0/0x2ec netlink_sendmsg+0x198/0x3d0 ____sys_sendmsg+0x1b0/0x210 ___sys_sendmsg+0x80/0xf0 __sys_sendmsg+0x44/0xa0 __arm64_sys_sendmsg+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x40/0xd0 el0_svc+0x14/0x4c el0t_64_sync_handler+0x100/0x110 el0t_64_sync+0x15c/0x160 Code: d2800002 910092c0 52800023 f9800011 (885f7c01) ---[ end trace 7e42dd9a39ed2281 ]--- Fix by using mt76_dev_phy() which will map band_idx to the correct phy for all hardware combinations. Fixes: 0335c03 ("wifi: mt76: fix race condition related to checking tx queue fill status") Link: openwrt/openwrt#14548 Signed-off-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/20240713130010.516037-1-bjorn@mork.no Signed-off-by: Felix Fietkau <nbd@nbd.name>

… usage The check should start from 5845 to 5925, which includes channels 169, 173, and 177. Fixes: 09382d8 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20240806013408.17874-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

The chainmask is u16 so using hweight8 cannot get correct tx_ant. Without this patch, the tx_ant of band 2 would be -1 and lead to the following issue: BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e] Fixes: 98686cd ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-1-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

…channel During scanning, UNI_CHANNEL_RX_PATH tag is necessary for the firmware to properly stop and resume MAC TX queue. Without this tag, HW needs more time to resume traffic when switching back to working channel. Fixes: 98686cd ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-2-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

According to connac3 HW design, the WMM index of AP and STA interface should be 0 and 3, respectively. Fixes: 98686cd ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-3-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

Advertize beacon_int_min_gcd as 100 to allow setting different beacon intervals on different interfaces. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-4-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix HE and EHT beamforming capabilities for different bands and interface types. Fixes: 98686cd ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Fixes: 348533e ("wifi: mt76: mt7996: add EHT capability init") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-5-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

According to IEEE P802.11be/D6.0 Table 9-417n, beamformee SS field stands for the maximum number of spatial streams that the STA can receive in an EHT sounding NDP minus 1, and the minimum value of this field is 3. This value indicates the decoding capability of a beamformee, which is independent of current antenna settings. Correct the value for mt7996 and mt7992 chipsets based on their HW capability. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-6-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

If a VIF acts as a beamformer, it should check peer's beamformee capability, and vice versa. Fixes: ba01944 ("wifi: mt76: mt7996: add EHT beamforming support") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-7-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

…mt7992 Configure correct bf number and bitmap in beamforming mcu command for mt7992 chipsets, which only support dual-band. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-8-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

When mbss was previously enabled, the TLV needs to be included when disabling it again, in order to clear the firmware state. Fixes: a7908d5 ("wifi: mt76: mt7996: fix non-main BSS no beacon issue for MBSS scenario") Signed-off-by: Rex Lu <rex.lu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-9-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add fragment index into TXD.DW2 to support IEEE 802.11 fragmentation. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-10-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

…phers When beacon protection is enabled, FW checks MMIE tag & length in the beacon for every cipher mode. To pass the check, driver needs to set the key flag IEEE80211_KEY_GENERATE_MMIE to let mac80211 generate and initialize MMIE. Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20240816094635.2391-11-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

…er_he Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he routine adding an sta interface to the mt7996 driver. Found by code review. Cc: stable@vger.kernel.org Fixes: 98686cd ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Link: https://patch.msgid.link/20240813081242.3991814-1-make24@iscas.ac.cn Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix incorrect RXD offset and bitfield related to RX checksum offload. Fixes: 98686cd ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Fixes: 4e9011f ("wifi: mt76: connac: move connac3 definitions in mt76_connac3_mac.h") Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Link: https://patch.msgid.link/20240816095040.2574-1-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add support for mt7996 tri-band 2+3+3 variant. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>

rmandrad · 2024-08-28T04:09:06Z

tested on the banana bpi-r4 with the be14 wifi add-on
signed : Rudy Andram

nbd168 · 2024-08-28T06:27:30Z

Please send this to the linux-wireless list instead and extend the commit description a bit.

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 adds ctnetlink support for kernel side filtering for deletions, from Changliang Wu. Patch #2 updates nft_counter support to Use u64_stats_t, from Sebastian Andrzej Siewior. Patch #3 uses kmemdup_array() in all xtables frontends, from Yan Zhen. Patch #4 is a oneliner to use ERR_CAST() in nf_conntrack instead opencoded casting, from Shen Lichuan. Patch #5 removes unused argument in nftables .validate interface, from Florian Westphal. Patch #6 is a oneliner to correct a typo in nftables kdoc, from Simon Horman. Patch #7 fixes missing kdoc in nftables, also from Simon. Patch #8 updates nftables to handle timeout less than CONFIG_HZ. Patch #9 rejects element expiration if timeout is zero, otherwise it is silently ignored. Patch #10 disallows element expiration larger than timeout. Patch #11 removes unnecessary READ_ONCE annotation while mutex is held. Patch #12 adds missing READ_ONCE/WRITE_ONCE annotation in dynset. Patch #13 annotates data-races around element expiration. Patch #14 allocates timeout and expiration in one single set element extension, they are tighly couple, no reason to keep them separated anymore. Patch #15 updates nftables to interpret zero timeout element as never times out. Note that it is already possible to declare sets with elements that never time out but this generalizes to all kind of set with timeouts. Patch #16 supports for element timeout and expiration updates. * tag 'nf-next-24-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: set element timeout update support netfilter: nf_tables: zero timeout means element never times out netfilter: nf_tables: consolidate timeout extension for elements netfilter: nf_tables: annotate data-races around element expiration netfilter: nft_dynset: annotate data-races around set timeout netfilter: nf_tables: remove annotation to access set timeout while holding lock netfilter: nf_tables: reject expiration higher than timeout netfilter: nf_tables: reject element expiration with no timeout netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire netfilter: nf_tables: Add missing Kernel doc netfilter: nf_tables: Correct spelling in nf_tables.h netfilter: nf_tables: drop unused 3rd argument from validate callback ops netfilter: conntrack: Convert to use ERR_CAST() netfilter: Use kmemdup_array instead of kmemdup for multiple allocation netfilter: nft_counter: Use u64_stats_t for statistic. netfilter: ctnetlink: support CTA_FILTER for flush ==================== Link: https://patch.msgid.link/20240905232920.5481-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Machon says: ==================== net: lan966x: use the newly introduced FDMA library This patch series is the second of a 2-part series [1], that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot of open-coded bookkeeping and duplicate code for the two drivers. In this second series, the FDMA library will be taken into use by the lan966x switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch #1: select FDMA library for lan966x. Patch #2: includes the fdma_api.h header and removes old symbols. Patch #3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch #4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch #5: uses the library for adding DCB's in the rx path. Patch #6: uses the library for freeing rx buffers. Patch #7: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch #8: uses the library for adding DCB's in the tx path. Patch #9: uses the library helpers in the tx path. Patch #10: ditch last_in_use variable and use library instead. Patch #11: uses library helpers throughout. Patch #12: refactor lan966x_fdma_reload() function. [1] https://lore.kernel.org/netdev/20240902-fdma-sparx5-v1-0-1e7d5e5a9f34@microchip.com/ Signed-off-by: Daniel Machon <daniel.machon@microchip.com> ==================== Link: https://patch.msgid.link/20240905-fdma-lan966x-v1-0-e083f8620165@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait(). Fixes: 38cfb5a ("blk-wbt: improve waking of tasks") Cc: stable@vger.kernel.org Signed-off-by: Omar Sandoval <osandov@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

Chia-Yu Chang says: ==================== AccECN protocol preparation patch series Please find the v7 v7 (03-Mar-2025) - Move 2 new patches added in v6 to the next AccECN patch series v6 (27-Dec-2024) - Avoid removing removing the potential CA_ACK_WIN_UPDATE in ack_ev_flags of patch #1 (Eric Dumazet <edumazet@google.com>) - Add reviewed-by tag in patches #2, #3, #4, #5, #6, #7, #8, #12, #14 - Foloiwng 2 new pathces are added after patch #9 (Patch that adds SKB_GSO_TCP_ACCECN) * New patch #10 to replace exisiting SKB_GSO_TCP_ECN with SKB_GSO_TCP_ACCECN in the driver to avoid CWR flag corruption * New patch #11 adds AccECN for virtio by adding new negotiation flag (VIRTIO_NET_F_HOST/GUEST_ACCECN) in feature handshake and translating Accurate ECN GSO flag between virtio_net_hdr (VIRTIO_NET_HDR_GSO_ACCECN) and skb header (SKB_GSO_TCP_ACCECN) - Add detailed changelog and comments in #13 (Eric Dumazet <edumazet@google.com>) - Move patch #14 to the next AccECN patch series (Eric Dumazet <edumazet@google.com>) v5 (5-Nov-2024) - Add helper function "tcp_flags_ntohs" to preserve last 2 bytes of TCP flags of patch #4 (Paolo Abeni <pabeni@redhat.com>) - Fix reverse X-max tree order of patches #4, #11 (Paolo Abeni <pabeni@redhat.com>) - Rename variable "delta" as "timestamp_delta" of patch #2 fo clariety - Remove patch #14 in this series (Paolo Abeni <pabeni@redhat.com>, Joel Granados <joel.granados@kernel.org>) v4 (21-Oct-2024) - Fix line length warning of patches #2, #4, #8, #10, #11, #14 - Fix spaces preferred around '|' (ctx:VxV) warning of patch #7 - Add missing CC'ed of patches #4, #12, #14 v3 (19-Oct-2024) - Fix build error in v2 v2 (18-Oct-2024) - Fix warning caused by NETIF_F_GSO_ACCECN_BIT in patch #9 (Jakub Kicinski <kuba@kernel.org>) The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if the TCP connection isn't established when nvmet_tcp_set_queue_sock() is called then queue->state_change isn't set and sock->sk->sk_state_change isn't replaced. As such we don't need to restore sock->sk->sk_state_change if queue->state_change is NULL. This avoids NULL pointer dereferences such as this: [ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode [ 286.463796][ C0] #PF: error_code(0x0010) - not-present page [ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0 [ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI [ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary) [ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 286.467147][ C0] RIP: 0010:0x0 [ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246 [ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43 [ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100 [ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c [ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3 [ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268 [ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000 [ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0 [ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 [ 286.475453][ C0] Call Trace: [ 286.476102][ C0] <IRQ> [ 286.476719][ C0] tcp_fin+0x2bb/0x440 [ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60 [ 286.478174][ C0] ? __build_skb_around+0x234/0x330 [ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10 [ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0 [ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30 [ 286.482769][ C0] ? ktime_get+0x66/0x150 [ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050 [ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0 [ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10 [ 286.486917][ C0] ? lock_release+0x217/0x2c0 [ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0 [ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30 [ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0 [ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10 [ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10 [ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack] [ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370 [ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420 [ 286.494268][ C0] ip_local_deliver+0x168/0x430 [ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10 [ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20 [ 286.496806][ C0] ? lock_release+0x217/0x2c0 [ 286.497414][ C0] ip_rcv+0x455/0x6e0 [ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10 [ 286.498550][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.499137][ C0] ? __pfx_ip_rcv_finish+0x10/0x10 [ 286.499763][ C0] ? lock_release+0x217/0x2c0 [ 286.500327][ C0] ? dl_scaled_delta_exec+0xd1/0x2c0 [ 286.500922][ C0] ? __pfx_ip_rcv+0x10/0x10 [ 286.501480][ C0] __netif_receive_skb_one_core+0x166/0x1b0 [ 286.502173][ C0] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 286.502903][ C0] ? lock_acquire+0x2b2/0x310 [ 286.503487][ C0] ? process_backlog+0x372/0x1350 [ 286.504087][ C0] ? lock_release+0x217/0x2c0 [ 286.504642][ C0] process_backlog+0x3b9/0x1350 [ 286.505214][ C0] ? process_backlog+0x372/0x1350 [ 286.505779][ C0] __napi_poll.constprop.0+0xa6/0x490 [ 286.506363][ C0] net_rx_action+0x92e/0xe10 [ 286.506889][ C0] ? __pfx_net_rx_action+0x10/0x10 [ 286.507437][ C0] ? timerqueue_add+0x1f0/0x320 [ 286.507977][ C0] ? sched_clock_cpu+0x68/0x540 [ 286.508492][ C0] ? lock_acquire+0x2b2/0x310 [ 286.509043][ C0] ? kvm_sched_clock_read+0xd/0x20 [ 286.509607][ C0] ? handle_softirqs+0x1aa/0x7d0 [ 286.510187][ C0] handle_softirqs+0x1f2/0x7d0 [ 286.510754][ C0] ? __pfx_handle_softirqs+0x10/0x10 [ 286.511348][ C0] ? irqtime_account_irq+0x181/0x290 [ 286.511937][ C0] ? __dev_queue_xmit+0x85d/0x3450 [ 286.512510][ C0] do_softirq.part.0+0x89/0xc0 [ 286.513100][ C0] </IRQ> [ 286.513548][ C0] <TASK> [ 286.513953][ C0] __local_bh_enable_ip+0x112/0x140 [ 286.514522][ C0] ? __dev_queue_xmit+0x85d/0x3450 [ 286.515072][ C0] __dev_queue_xmit+0x872/0x3450 [ 286.515619][ C0] ? nft_do_chain+0xe16/0x15b0 [nf_tables] [ 286.516252][ C0] ? __pfx___dev_queue_xmit+0x10/0x10 [ 286.516817][ C0] ? selinux_ip_postroute+0x43c/0xc50 [ 286.517433][ C0] ? __pfx_selinux_ip_postroute+0x10/0x10 [ 286.518061][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.518606][ C0] ? ip_output+0x164/0x4a0 [ 286.519149][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.519671][ C0] ? ip_finish_output2+0x17d5/0x1fb0 [ 286.520258][ C0] ip_finish_output2+0xb4b/0x1fb0 [ 286.520787][ C0] ? __pfx_ip_finish_output2+0x10/0x10 [ 286.521355][ C0] ? __ip_finish_output+0x15d/0x750 [ 286.521890][ C0] ip_output+0x164/0x4a0 [ 286.522372][ C0] ? __pfx_ip_output+0x10/0x10 [ 286.522872][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.523402][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [ 286.524031][ C0] ? __pfx_ip_finish_output+0x10/0x10 [ 286.524605][ C0] ? __ip_queue_xmit+0x999/0x2260 [ 286.525200][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.525744][ C0] ? ipv4_dst_check+0x16a/0x2b0 [ 286.526279][ C0] ? lock_release+0x217/0x2c0 [ 286.526793][ C0] __ip_queue_xmit+0x1883/0x2260 [ 286.527324][ C0] ? __skb_clone+0x54c/0x730 [ 286.527827][ C0] __tcp_transmit_skb+0x209b/0x37a0 [ 286.528374][ C0] ? __pfx___tcp_transmit_skb+0x10/0x10 [ 286.528952][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.529472][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.530152][ C0] ? trace_hardirqs_on+0x12/0x120 [ 286.530691][ C0] tcp_write_xmit+0xb81/0x88b0 [ 286.531224][ C0] ? mod_memcg_state+0x4d/0x60 [ 286.531736][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.532253][ C0] __tcp_push_pending_frames+0x90/0x320 [ 286.532826][ C0] tcp_send_fin+0x141/0xb50 [ 286.533352][ C0] ? __pfx_tcp_send_fin+0x10/0x10 [ 286.533908][ C0] ? __local_bh_enable_ip+0xab/0x140 [ 286.534495][ C0] inet_shutdown+0x243/0x320 [ 286.535077][ C0] nvme_tcp_alloc_queue+0xb3b/0x2590 [nvme_tcp] [ 286.535709][ C0] ? do_raw_spin_lock+0x129/0x260 [ 286.536314][ C0] ? __pfx_nvme_tcp_alloc_queue+0x10/0x10 [nvme_tcp] [ 286.536996][ C0] ? do_raw_spin_unlock+0x54/0x1e0 [ 286.537550][ C0] ? _raw_spin_unlock+0x29/0x50 [ 286.538127][ C0] ? do_raw_spin_lock+0x129/0x260 [ 286.538664][ C0] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 286.539249][ C0] ? nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp] [ 286.539892][ C0] ? __wake_up+0x40/0x60 [ 286.540392][ C0] nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp] [ 286.541047][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.541589][ C0] nvme_tcp_setup_ctrl+0x8b/0x7a0 [nvme_tcp] [ 286.542254][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [ 286.542887][ C0] ? __pfx_nvme_tcp_setup_ctrl+0x10/0x10 [nvme_tcp] [ 286.543568][ C0] ? trace_hardirqs_on+0x12/0x120 [ 286.544166][ C0] ? _raw_spin_unlock_irqrestore+0x35/0x60 [ 286.544792][ C0] ? nvme_change_ctrl_state+0x196/0x2e0 [nvme_core] [ 286.545477][ C0] nvme_tcp_create_ctrl+0x839/0xb90 [nvme_tcp] [ 286.546126][ C0] nvmf_dev_write+0x3db/0x7e0 [nvme_fabrics] [ 286.546775][ C0] ? rw_verify_area+0x69/0x520 [ 286.547334][ C0] vfs_write+0x218/0xe90 [ 286.547854][ C0] ? do_syscall_64+0x9f/0x190 [ 286.548408][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.549037][ C0] ? syscall_exit_to_user_mode+0x93/0x280 [ 286.549659][ C0] ? __pfx_vfs_write+0x10/0x10 [ 286.550259][ C0] ? do_syscall_64+0x9f/0x190 [ 286.550840][ C0] ? syscall_exit_to_user_mode+0x8e/0x280 [ 286.551516][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.552180][ C0] ? syscall_exit_to_user_mode+0x93/0x280 [ 286.552834][ C0] ? ksys_read+0xf5/0x1c0 [ 286.553386][ C0] ? __pfx_ksys_read+0x10/0x10 [ 286.553964][ C0] ksys_write+0xf5/0x1c0 [ 286.554499][ C0] ? __pfx_ksys_write+0x10/0x10 [ 286.555072][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.555698][ C0] ? syscall_exit_to_user_mode+0x93/0x280 [ 286.556319][ C0] ? do_syscall_64+0x54/0x190 [ 286.556866][ C0] do_syscall_64+0x93/0x190 [ 286.557420][ C0] ? rcu_read_unlock+0x17/0x60 [ 286.557986][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.558526][ C0] ? lock_release+0x217/0x2c0 [ 286.559087][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.559659][ C0] ? count_memcg_events.constprop.0+0x4a/0x60 [ 286.560476][ C0] ? exc_page_fault+0x7a/0x110 [ 286.561064][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.561647][ C0] ? lock_release+0x217/0x2c0 [ 286.562257][ C0] ? do_user_addr_fault+0x171/0xa00 [ 286.562839][ C0] ? do_user_addr_fault+0x4a2/0xa00 [ 286.563453][ C0] ? irqentry_exit_to_user_mode+0x84/0x270 [ 286.564112][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.564677][ C0] ? irqentry_exit_to_user_mode+0x84/0x270 [ 286.565317][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120 [ 286.565922][ C0] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 286.566542][ C0] RIP: 0033:0x7fe3c05e6504 [ 286.567102][ C0] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d c5 8b 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 286.568931][ C0] RSP: 002b:00007fff76444f58 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 286.569807][ C0] RAX: ffffffffffffffda RBX: 000000003b40d930 RCX: 00007fe3c05e6504 [ 286.570621][ C0] RDX: 00000000000000cf RSI: 000000003b40d930 RDI: 0000000000000003 [ 286.571443][ C0] RBP: 0000000000000003 R08: 00000000000000cf R09: 000000003b40d930 [ 286.572246][ C0] R10: 0000000000000000 R11: 0000000000000202 R12: 000000003b40cd60 [ 286.573069][ C0] R13: 00000000000000cf R14: 00007fe3c07417f8 R15: 00007fe3c073502e [ 286.573886][ C0] </TASK> Closes: https://lore.kernel.org/linux-nvme/5hdonndzoqa265oq3bj6iarwtfk5dewxxjtbjvn5uqnwclpwt6@a2n6w3taxxex/ Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>

Ido Schimmel says: ==================== vxlan: Convert FDB table to rhashtable The VXLAN driver currently stores FDB entries in a hash table with a fixed number of buckets (256), resulting in reduced performance as the number of entries grows. This patchset solves the issue by converting the driver to use rhashtable which maintains a more or less constant performance regardless of the number of entries. Measured transmitted packets per second using a single pktgen thread with varying number of entries when the transmitted packet always hits the default entry (worst case): Number of entries | Improvement ------------------|------------ 1k | +1.12% 4k | +9.22% 16k | +55% 64k | +585% 256k | +2460% The first patches are preparations for the conversion in the last patch. Specifically, the series is structured as follows: Patch #1 adds RCU read-side critical sections in the Tx path when accessing FDB entries. Targeting at net-next as I am not aware of any issues due to this omission despite the code being structured that way for a long time. Without it, traces will be generated when converting FDB lookup to rhashtable_lookup(). Patch #2-#5 simplify the creation of the default FDB entry (all-zeroes). Current code assumes that insertion into the hash table cannot fail, which will no longer be true with rhashtable. Patches #6-#10 add FDB entries to a linked list for entry traversal instead of traversing over them using the fixed size hash table which is removed in the last patch. Patches #11-#12 add wrappers for FDB lookup that make it clear when each should be used along with lockdep annotations. Needed as a preparation for rhashtable_lookup() that must be called from an RCU read-side critical section. Patch #13 treats dst cache initialization errors as non-fatal. See more info in the commit message. The current code happens to work because insertion into the fixed size hash table is slow enough for the per-CPU allocator to be able to create new chunks of per-CPU memory. Patch #14 adds an FDB key structure that includes the MAC address and source VNI. To be used as rhashtable key. Patch #15 does the conversion to rhashtable. ==================== Link: https://patch.msgid.link/20250415121143.345227-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

… prevent wrong idmap generation The PTE_MAYBE_NG macro sets the nG page table bit according to the value of "arm64_use_ng_mappings". This variable is currently placed in the .bss section. create_init_idmap() is called before the .bss section initialisation which is done in early_map_kernel(). Therefore, data/test_prot in create_init_idmap() could be set incorrectly through the PAGE_KERNEL -> PROT_DEFAULT -> PTE_MAYBE_NG macros. # llvm-objdump-21 --syms vmlinux-gcc | grep arm64_use_ng_mappings ffff800082f242a8 g O .bss 0000000000000001 arm64_use_ng_mappings The create_init_idmap() function disassembly compiled with llvm-21: // create_init_idmap() ffff80008255c058: d10103ff sub sp, sp, #0x40 ffff80008255c05c: a9017bfd stp x29, x30, [sp, #0x10] ffff80008255c060: a90257f6 stp x22, x21, [sp, #0x20] ffff80008255c064: a9034ff4 stp x20, x19, [sp, #0x30] ffff80008255c068: 910043fd add x29, sp, #0x10 ffff80008255c06c: 90003fc8 adrp x8, 0xffff800082d54000 ffff80008255c070: d280e06a mov x10, #0x703 // =1795 ffff80008255c074: 91400409 add x9, x0, #0x1, lsl #12 // =0x1000 ffff80008255c078: 394a4108 ldrb w8, [x8, #0x290] ------------- (1) ffff80008255c07c: f2e00d0a movk x10, #0x68, lsl #48 ffff80008255c080: f90007e9 str x9, [sp, #0x8] ffff80008255c084: aa0103f3 mov x19, x1 ffff80008255c088: aa0003f4 mov x20, x0 ffff80008255c08c: 14000000 b 0xffff80008255c08c <__pi_create_init_idmap+0x34> ffff80008255c090: aa082d56 orr x22, x10, x8, lsl #11 -------- (2) Note (1) is loading the arm64_use_ng_mappings value in w8 and (2) is set the text or data prot with the w8 value to set PTE_NG bit. If the .bss section isn't initialized, x8 could include a garbage value and generate an incorrect mapping. Annotate arm64_use_ng_mappings as __read_mostly so that it is placed in the .data section. Fixes: 84b04d3 ("arm64: kernel: Create initial ID map from C code") Cc: stable@vger.kernel.org # 6.9.x Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Link: https://lore.kernel.org/r/20250502180412.3774883-1-yeoreum.yun@arm.com [catalin.marinas@arm.com: use __read_mostly instead of __ro_after_init] [catalin.marinas@arm.com: slight tweaking of the code comment] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Petr Machata says: ==================== ipmr, ip6mr: Allow MC-routing locally-generated MC packets Multicast routing is today handled in the input path. Locally generated MC packets don't hit the IPMR code. Thus if a VXLAN remote address is multicast, the driver needs to set an OIF during route lookup. In practice that means that MC routing configuration needs to be kept in sync with the VXLAN FDB and MDB. Ideally, the VXLAN packets would be routed by the MC routing code instead. To that end, this patchset adds support to route locally generated multicast packets. However, an installation that uses a VXLAN underlay netdevice for which it also has matching MC routes, would get a different routing with this patch. Previously, the MC packets would be delivered directly to the underlay port, whereas now they would be MC-routed. In order to avoid this change in behavior, introduce an IPCB/IP6CB flag. Unless the flag is set, the new MC-routing code is skipped. All this is keyed to a new VXLAN attribute, IFLA_VXLAN_MC_ROUTE. Only when it is set does any of the above engage. In addition to that, and as is the case today with MC forwarding, IPV4_DEVCONF_MC_FORWARDING must be enabled for the netdevice that acts as a source of MC traffic (i.e. the VXLAN PHYS_DEV), so an MC daemon must be attached to the netdevice. When a VXLAN netdevice with a MC remote is brought up, the physical netdevice joins the indicated MC group. This is important for local delivery of MC packets, so it is still necessary to configure a physical netdevice -- the parameter cannot go away. The netdevice would however typically not be a front panel port, but a dummy. An MC daemon would then sit on top of that netdevice as well as any front panel ports that it needs to service, and have routes set up between the two. A way to configure the VXLAN netdevice to take advantage of the new MC routing would be: # ip link add name d up type dummy # ip link add name vx10 up type vxlan id 1000 dstport 4789 \ local 192.0.2.1 group 225.0.0.1 ttl 16 dev d mrcoute # ip link set dev vx10 master br # plus vlans etc. With the following MC routes: (192.0.2.1, 225.0.0.1) iif=d oil=swp1,swp2 # TX route (*, 225.0.0.1) iif=swp1 oil=d,swp2 # RX route (*, 225.0.0.1) iif=swp2 oil=d,swp1 # RX route The RX path has not changed, with the exception of an extra MC hop. Packets are delivered to the front panel port and MC-forwarded to the VXLAN physical port, here "d". Since the port has joined the multicast group, the packets are locally delivered, and end up being processed by the VXLAN netdevice. This patchset is based on earlier patches from Nikolay Aleksandrov and Roopa Prabhu, though it underwent significant changes. Roopa broadly presented the topic on LPC 2019 [0]. Patchset progression: - Patches #1 to #4 add ip_mr_output() - Patches #5 to #10 add ip6_mr_output() - Patch #11 adds the VXLAN bits to enable MR engagement - Patches #12 to #14 prepare selftest libraries - Patch #15 includes a new test suite [0] https://www.youtube.com/watch?v=xlReECfi-uo ==================== Link: https://patch.msgid.link/cover.1750113335.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…th() KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth(). Call Trace: [ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550 [ 97.285732] [ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11 [ 97.287032] Hardware name: linux,dummy-virt (DT) [ 97.287815] Call trace: [ 97.288279] dump_backtrace+0xa0/0x128 [ 97.288946] show_stack+0x20/0x38 [ 97.289551] dump_stack_lvl+0x78/0xc8 [ 97.290203] print_address_description.constprop.0+0x84/0x3c8 [ 97.291159] print_report+0xb0/0x280 [ 97.291792] kasan_report+0x84/0xd0 [ 97.292421] __asan_load8+0x9c/0xc0 [ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.293835] process_fetch_insn+0x770/0xa30 [ 97.294562] kprobe_trace_func+0x254/0x3b0 [ 97.295271] kprobe_dispatcher+0x98/0xe0 [ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210 [ 97.296774] call_break_hook+0xc4/0x100 [ 97.297451] brk_handler+0x24/0x78 [ 97.298073] do_debug_exception+0xac/0x178 [ 97.298785] el1_dbg+0x70/0x90 [ 97.299344] el1h_64_sync_handler+0xcc/0xe8 [ 97.300066] el1h_64_sync+0x78/0x80 [ 97.300699] kernel_clone+0x0/0x500 [ 97.301331] __arm64_sys_clone+0x70/0x90 [ 97.302084] invoke_syscall+0x68/0x198 [ 97.302746] el0_svc_common.constprop.0+0x11c/0x150 [ 97.303569] do_el0_svc+0x38/0x50 [ 97.304164] el0_svc+0x44/0x1d8 [ 97.304749] el0t_64_sync_handler+0x100/0x130 [ 97.305500] el0t_64_sync+0x188/0x190 [ 97.306151] [ 97.306475] The buggy address belongs to stack of task 1.sh/2550 [ 97.307461] and is located at offset 0 in frame: [ 97.308257] __se_sys_clone+0x0/0x138 [ 97.308910] [ 97.309241] This frame has 1 object: [ 97.309873] [48, 184) 'args' [ 97.309876] [ 97.310749] The buggy address belongs to the virtual mapping at [ 97.310749] [ffff800089270000, ffff800089279000) created by: [ 97.310749] dup_task_struct+0xc0/0x2e8 [ 97.313347] [ 97.313674] The buggy address belongs to the physical page: [ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a [ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff) [ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000 [ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 97.319445] page dumped because: kasan: bad access detected [ 97.320371] [ 97.320694] Memory state around the buggy address: [ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00 [ 97.325023] ^ [ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This issue seems to be related to the behavior of some gcc compilers and was also fixed on the s390 architecture before: commit d93a855 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()") As described in that commit, regs_get_kernel_stack_nth() has confirmed that `addr` is on the stack, so reading the value at `*addr` should be allowed. Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case. Fixes: 0a8ea52 ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature") Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> Link: https://lore.kernel.org/r/20250604005533.1278992-1-wutengda@huaweicloud.com [will: Use '*addr' as the argument to READ_ONCE_NOCHECK()] Signed-off-by: Will Deacon <will@kernel.org>

bmork and others added 16 commits August 16, 2024 19:09

wifi: mt76: mt7996: support mt7996 2+3+3 variant

1d2d7fc

Add support for mt7996 tri-band 2+3+3 variant. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>

nbd168 force-pushed the mt76 branch 3 times, most recently from fec8d12 to 6bba05d Compare September 6, 2024 12:23

nbd168 force-pushed the mt76 branch from 4d2150f to 6e7028d Compare October 31, 2024 15:29

nbd168 force-pushed the mt76 branch 2 times, most recently from 93cfc7a to a11652c Compare December 30, 2024 18:25

nbd168 force-pushed the mt76 branch 3 times, most recently from 4d915d0 to e152d4a Compare January 13, 2025 18:10

nbd168 force-pushed the mt76 branch from f9d8a3d to 06cccc2 Compare March 19, 2025 13:47

nbd168 force-pushed the mt76 branch from 38264c8 to c8ca276 Compare April 11, 2025 09:08

nbd168 force-pushed the mt76 branch from 20b816d to eeaab2e Compare May 15, 2025 10:40

nbd168 force-pushed the mt76 branch 4 times, most recently from a8afb17 to e54b870 Compare May 22, 2025 10:57

nbd168 force-pushed the mt76 branch from 4327120 to b3a431f Compare July 3, 2025 17:27

nbd168 force-pushed the mt76 branch 3 times, most recently from 035ba65 to 336c7d6 Compare September 1, 2025 14:46

nbd168 force-pushed the mt76 branch 7 times, most recently from 8620dfb to 901e082 Compare September 11, 2025 12:41

nbd168 force-pushed the mt76 branch from 901e082 to fc6627c Compare September 15, 2025 07:53

nbd168 force-pushed the mt76 branch 2 times, most recently from 9b651ae to 0960042 Compare November 15, 2025 09:22

nbd168 force-pushed the mt76 branch 2 times, most recently from e0d810f to 53d1548 Compare November 24, 2025 14:02

nbd168 force-pushed the mt76 branch from ed8c476 to 4eefc43 Compare February 3, 2026 08:22

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

wifi: mt76: mt7996: support mt7996 2+3+3 variant#11

wifi: mt76: mt7996: support mt7996 2+3+3 variant#11
dangowrt wants to merge 16 commits intonbd168:mt76from
dangowrt:mt7996-233

dangowrt commented Aug 27, 2024

Uh oh!

rmandrad commented Aug 28, 2024

Uh oh!

nbd168 commented Aug 28, 2024

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

6 participants

Conversation

dangowrt commented Aug 27, 2024

Uh oh!

rmandrad commented Aug 28, 2024

Uh oh!

nbd168 commented Aug 28, 2024

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

6 participants