Argon ONE (V2) Pi 4 Script for RetroPie

I've been running a retroPie install on my rPi 4 using the Argon One V2 case with ssd add on.
I learned that Emulation Station needs to shut down gracefully in order to save some changes propperly. I also learned about the wonderful ES Generic shut down script. So I updated the Argon One script to use the ES Shutdown script for both the shutdown and reboot commands.

I am in no way affiliated with Argon 40, I only use their cases as an end user.

You can find them here:

• Argon 40 Website: https://www.argon40.com
• Argon 40 Github: https://github.com/Argon40Tech

How to install

Prerequisites

• RetroPie running on an a Raspberry Pi 4
• Argon ONE (V2) Case for Raspberry Pi 4

Installing

1. Open "Terminal" in Raspbian.

2. Type the three commands below, pressing enter after each, to install

   mkdir /home/pi/myRetroPieScripts && cd /home/pi/myRetroPieScripts
   

   wget https://raw.githubusercontent.com/crcerror/ES-generic-shutdown/master/multi_switch.sh && chmod +x multi_switch.sh
   

   curl https://raw.githubusercontent.com/pponce/ArgonOne-retroPie-Script/master/source/argon1.sh | bash
   

3. Reboot.

Usage Instructions are the same as the original scripts from Argon40

Argon ONE (V2) Pi 4 Power Button Functions

ARGON ONE (V2) PI 4 STATE	ACTION	FUNCTION
OFF	Short Press	Turn ON
ON	Long Press (>= 3 s)	Soft Shutdown and Power Cut
ON	Short Press (< 3 s)	Nothing
ON	Double Tap	Reboot
ON	Long Press (>= 5 s)	Forced Shutdown

Argon ONE (V2) Pi 4 Fan Speed

Upon installation of the Argon ONE (V2) Pi 4 script by default, the settings of the Argon ONE (V2) Pi 4 cooling system are as follows:

CPU TEMP	FAN POWER
55 C	10%
60 C	55%
65 C	100%

However, you may change or configure the FAN to your desired settings by clicking the Argon ONE (V2) Pi 4 Config icon on your Desktop.

Or via "Terminal" by typing and following the specified format:

argonone-config

Uninstalling Argon ONE (V2) Pi 4 Script

To uninstall the Argon ONE (V2) Pi 4 script you may do so by clicking the Argon One (V2) Pi 4 Uninstall icon on your Desktop.

You may also remove the script via "Terminal" by typing.

argonone-uninstall

Always reboot after changing any configuration or uninstallation for the revised settings to take effect.

Acknowledgments

Thanks to Argon 40 for building these great Raspberry Pi Cases.

crcerror for creating this great shutdown script for retroPie users ES-generic-shutdown.

---