QCLINUX: arm64: configs: move QDSS debug configs to debug.config #454
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Add prune.config fragment to disable support for non-Qualcomm architectures. This helps reduce boot image size and improves kernel build KPIs by trimming unnecessary configuration options. Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Introduce `qcom.config`, a Qualcomm-specific kernel configuration fragment that enables features required by Qualcomm SoCs. It includes CONFIGs not acceptable under the community's common defconfig and ensures essential features and subsystems required by Qualcomm platforms are enbaled. This initial version of `qcom.config` enables DMABUF heap support, including the system heap and default CMA heap. These configurations are essential for buffer sharing across subsystems such as camera, display, and DSP on Qualcomm platforms like qcs6490. Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
…nfig Add Coresight configs to enable Coresight device drivers on mainline. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Enable ZRAM defconfig on qcom.config. This empowers users to use the compressed block devices for usecases, eg: swap device on zram. Tested: make ARCH=arm64 menuconfig defconfig qcom.config, booted with this configuration on QEMU and verified if /dev/zram0 is exist. Signed-off-by: Charan Teja Kalla <charan.kalla@oss.qualcomm.com>
Enabled key configs for thermal management (CPU_IDLE_THERMAL, IDLE_INJECT), scheduler (SCHED_DEBUG, SCHEDSTATS, TRACE_MMIO_ACCESS), and power control (POWERCAP, UCLAMP_TASK). Also enabled KPROBES, PAN emulation and watchdog pretimeout panic governor for improved instrumentation and security. Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Enabled various debug-related kernel config options to improve system diagnostics and aid in development and issue analysis. Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Add STM configs to enable STM functions, like stm ftrace and stm heartbeat. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
…Kaanapali The serial engine must be properly setup before kernel reash "init", so UART driver and its dependencies needs to be built in. Enable its dependency GCC, interconnect and pinctrl as built-in to boot Kaanapali QRD and MTP board to UART console. Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com> Link: https://lore.kernel.org/all/20250924-knp-config-v1-1-e2cf83b1932e@oss.qualcomm.com/
Enabled key config of Crypto (CONFIG_CRYPTO_USER_API, CONFIG_CRYPTO_USER_API_HASH, CONFIG_CRYPTO_USER_API_SKCIPHER, CONFIG_CRYPTO_USER_API_AEAD). And else for support ICE config. Signed-off-by: Wenjia Zhang <wenjia.zhang@oss.qualcomm.com>
Enable SENSOR_AMC6821 defconfig to enable fan controller support. Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Enable the config for the QCA808X ethernet PHY driver. Ethernet is non functional without this driver on Lemans and Monaco EVK. Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
The ANX7625 bridge on the Qualcomm QCS615 Ride reference board is connected to a Semtech SX150x GPIO expander. Enable the SX150x driver to make the display on boards built following this design functional. Signed-off-by: Fange Zhang <fange.zhang@oss.qualcomm.com> Link: https://lore.kernel.org/all/20251105-enable-sx150x-gpio-expander-v3-1-2ec8dfde2c9e@oss.qualcomm.com/ Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Enable QCOM EDAC driver support for QCOM SoCs. Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Enable WLAN related debug configs. Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Enable ATH reg setting, then user can change country code by netlink command. Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Enable as modules the BT_BNEP and BT_RFCOMM drivers which are required for Bluetooth profiles such as PAN and SPP. Without these modules, PAN and SPP functionality will not be available. Enable UHID support to allow HID over GATT operations. Without this, user-space cannot create virtual HID devices, which impacts HID profile usage over Bluetooth. Signed-off-by: Wei Deng <wei.deng@oss.qualcomm.com>
Enable various PM configs to enable suspend-resume. Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Enabled various power management debug related kernel config options to improve system diagnostics and aid in development and issue analysis. Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Lontium LT8713sx DP bridge hub can be found in monaco-evk for converting 1 DP to 3 DP output. Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com> Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com> Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com> Link: https://lore.kernel.org/all/20251120-lt8713sx-bridge-linux-for-next-v1-2-2246fc5fb490@qti.qualcomm.com/
…nfigs" Revert commit 68f6c9a. Enabling ICE-related configurations causes crashes on the lemans-evk device, so this change is being reverted until the issue is resolved. Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
CrosVM supports vCPU Stall watchdog. QEMU supports I6300 ESB watchdog. Enable corresponding drivers for Guest VM usecases. Signed-off-by: Nikhil V <nikhil.v@oss.qualcomm.com>
Removed UBSAN, KASAN, kmemleak, lock proving, and function tracing from debug.config to reduce bootup time and prevent probe deferring issues. Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
… for Qualcomm TEE (QTEE) We are planning to replace QPTEE with QCOMTEE on all QCOM-released kernel versions. QTEE allows Trusted Applications (TAs) and services to run securely and offers the same functionality as OPTEE. Signed-off-by: Jiaxing Li <jiaxing.li@oss.qualcomm.com> Link: qualcomm-linux#121
…8750 and Tianma Enable drivers for Novatek NT36672A panel (used on Xiaomi Pocophone F1 Tianma, Qualcomm SDM845 SoC) and Novatek NT37801 panel (used on Qualcomm MTP8750 development board). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/all/20251009021507.175290-2-krzysztof.kozlowski@linaro.org/ Signed-off-by: Yash Gupta <quic_ygupt@quicinc.com>
Added the required configs to enable host kernel accelerator for virtio net(vhost-net) and virtual socket protocol(vsock). Signed-off-by: Nikhil V <nikhil.v@oss.qualcomm.com>
Enable CONFIG_SND_SOC_DMIC as a module in the arm64 defconfig to support digital microphone functionality on Qualcomm's Monaco and Lemans platforms. Link: https://lore.kernel.org/all/20251203044217.171598-1-ravi.hothi@oss.qualcomm.com/ Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Enable Gunyah watchdog driver for rb3gen2. Signed-off-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
The serial engine must be properly setup before kernel reaches "init",so UART driver and its dependencies needs to be built in. Enable its dependency clocks,interconnect and pinctrl as built-in to boot Glymur CRD board to UART console with full USB support. Link: https://lore.kernel.org/lkml/20250925-v3_glymur_introduction-v1-2-24b601bbecc0@oss.qualcomm.com/ Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Nacked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Enable UINPUT, which is required for BT AVRC profile to register the events and All passthrough commands of AVRCP will be listed in this event under /dev/input/ Signed-off-by: Raghavender Reddy Bujala <rbujala@qti.qualcomm.com>
Move the QDSS debug configs from qcom.config to debug.config. We only need enable these debug features on debug version image. Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Komal-Bajaj
force-pushed
the
tech/all/config
branch
2 times, most recently
from
b4a22e3 to
24ab2f7
Compare
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
14 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Move the QDSS debug configs from qcom.config to debug.config. We only need enable these debug features on debug version image.